Aksesuar Rehberi

INSTALLATION AIDS

• 14 PIN BRACKET

  Kılavuz s.606
  • 8M0076435Rigging aid for 14 pin data cable. Rounded edges and anti-rotation.

• DUAL STATION RIG HARNESS

  Kılavuz s.606
  • 91 8M0119480Kit contains one harness and two weather caps. Used to temporarily rig a second station so the vessel can be operated while the second station is not installed (shipping, rigging installation, short term rework, etc.). Not compatible with sf2 next gen DTS.

• TOOL KIT-DIAG G3

  Kılavuz s.606
  • 91 8M0168921Full kit with license, harnesses, and kvaser cable.

• ADAPTER HARNESS

  Kılavuz s.606
  • 84 8M013766710 pin Jbox male pins to 5 pin N2K male pins Kvaser Diagnostic cable for use with G3 cable and Czone programming.

• POWER STEERING DIAGNOSTICS ADAPTER - GEN C

  Kılavuz s.606
  • 84 8M0156168This adapter is used to plug in to the Gen C or Gen C HD power steering pumps to access diagnostic information. Compatible with the Gen C and Gen C HD power steering pumps.

• CONTROL DRILLING FIXTURE

  Kılavuz s.606
  • 91 828363A1Used to help drill the holes for side mount control and panel mount control mounting bolts. For use with the Commander 2000 side mount and the Commander 3000 panel mount controls.

• TRANSOM DRILL FIXTURE KIT

  Kılavuz s.606
  • 91 866590A02Used to help drill the holes for the MerCruiser transom plate mounting bolts. For MCM 1.6L Vazer models.

• DRILL FIXTURE KIT

  Kılavuz s.606
  • 91 43693A2Used to help drill the holes for the MerCruiser transom plate mounting bolts. For MCM 3.0L to 350 Magnum (Alpha One), Bravo One, Two, Three and Blackhawk models.

• ENGINE MOUNTING FIXTURE

  Kılavuz s.606
  • 91 806794A02Gasoline engine mount installation tool fixture. MerCruiser gasoline engines, except Vazer engines.

• ENGINE MOUNTING FIXTURE

  Kılavuz s.607
  • 91 8M0114831Primary mount assembly. To be used in conjunction with Mount Fixture 22.5 in. (571 mm) p/n 8M0114832 and/or Mount Fixture 25.2 in. (640 mm) p/n 8M0114833. For use with all Mercury high speed diesel engines.

• ENGINE MOUNTING FIXTURE

  Kılavuz s.607
  • 91 8M0114832Fixture mount assembly. To be used in conjunction with Primary Mount Assembly p/n 8M0114831. For use with all Mercury high speed diesel engines, except the V8 TDI

• ENGINE MOUNTING FIXTURE

  Kılavuz s.607
  • 91 8M0114833Fixture mount assembly. To be used in conjunction with Primary Mount Assembly p/n 8M0114831. For use with Mercury high speed V8 TDI diesel engines

• ALIGNMENT SHAFT TOOL

  Kılavuz s.607
  • 91 805475A1Used to align the engine to the standard Bravo transom assembly for sterndrive installation. For MerCruiser drives, except Vazer drives.

• ALIGNMENT SHAFT

  Kılavuz s.607
  • 91 8M0125730For MerCruiser drives used with the 4.2L TDI engines

• ALIGNMENT SHAFT

  Kılavuz s.607
  • 91 8M0114829For MerCruiser 4.2L TDI engines with ITS transoms

• ALIGNMENT SHAFT

  Kılavuz s.607
  • 91 8M2001017Aids in aligning the engine to the transom assembly for sterndrive installation. Works with Vazer, Alpha and Bravo sterndrives.

• TRANSOM DRILLING FIXTURE

  Kılavuz s.607
  • 91 98234A2Used to help drill the holes for the outboard engine transom bracket mounting bolts. Mercury/Mariner 30/40 HP & above (2 cycle), 25 HP Bigfoot & above (4-Stroke), and Force 40-150 HP (1993 and newer).

• TRANSOM DRILLING FIXTURE - STANDARD

  Kılavuz s.607
  • 91 8M0149520Only includes the drill fixture, standard 20 hole, 1" block. Fits: L4 and L6 Verado, 175-300 HP V6 (3.4L) & V8 (4.6L), 150 HP FourStroke & 75-115 HP (2.1L) EFI FourStroke engines.

• DRILL GUIDE BLOCK - 1 INCH

  Kılavuz s.608
  • 91 8M01495251 inch drill guide block with 5 holes. Standard option

• TRANSOM DRILLING FIXTURE KIT - PROFESSIONAL OPTION

  Kılavuz s.608
  • 91 8M0138402Kit includes: Suction cup for a good hold and accurate drilling, suction cup manual & cover, 2" drill guide blocks that ensure straight drill path for thick transoms and 2 holes per guide block that reduces the likelihood of drilling into the wrong hole. Fits: L4 and L6 Verado, 175-300 HP V6 (3.4L) & V8 (4.6L), 150 HP FourStroke & 75-115 HP (2.1L) EFI FourStroke engines.

• DRILL GUIDE BLOCK - 2 INCH

  Kılavuz s.608
  • 91 8M01495262 inch drill guide block with 5 holes. Professional option (use on thick transoms to ensure straight drill path).

• DRILL GUIDE BLOCK - OEM 2 INCH

  Kılavuz s.608
  • 91 8M01495272 inch drill guide block with 2 holes. Professional option for OEM boat builders (utilize on new / undrilled transoms to ensure thick transoms are drilled straight).

• TRANSOM DRILL FIXTURE ASSEMBLY

  Kılavuz s.608
  • 91 8M0180599Used to help drill holes for V12 outboard transom plate mounting bolts. V12 Outboards

• STORY POLE KIT

  Kılavuz s.608
  • 91 8M0180742Story pole option bolts to drill fixture to reference engine height to hull bottom. V12 outboards

• JOINING PLATE TOOL

  Kılavuz s.608
  • 91 8M0180741Joining plate with 27 inch center to center spacing between transom drill fixtures. Used for multiple outboard applications. V12 outboards

• DRILL BUSHING

  Kılavuz s.608
  • 91 8M0180731Replacement 5/8" drill bushing for drill fixture. V12 Outboards

• DRILL FIXTURE

  Kılavuz s.608
  • 8M0210331Basic 6 hole standard drill fixture hole pattern. 40HP-500R outboards

• HEAVY DUTY SUCTION CUP VALVE KIT

  Kılavuz s.608
  • 8M02103338 inch metal suction cup power grip used with standard 6 hole drill fixture. 40HP-500R outboards

• SUCTION CUP

  Kılavuz s.608
  • 8M02103324.5 inch suction cup used with standard 6 hole drill fixture. 40HP-500R outboards

• KICKER BUSHINGS KIT

  Kılavuz s.608
  • 8M0210334Bushings kit for kicker engines to be used with standard 6 hole drill fixture. 9.9HP-20 outboards

• DRILL BUSHING .5 INCH

  Kılavuz s.608
  • 23 8M0210336Replaceable .5 inch ID drill guide bushings for standard 6 hole drill fixture. 40HP-500R outboards

• DRILL GUIDE BUSHING .375 INCH

  Kılavuz s.609
  • 23 8M0210338Replaceable .375 inch ID drill guide bushings for standard 6 hole drill fixture. 40HP-500R outboards

• DRILL PLATE

  Kılavuz s.609
  • 8M0210335Drill plate only for standard 6 hole drill fixture. 40HP-500R outboards

• PRELIMINARY SHIFT ADJUSTMENT TOOL

  Kılavuz s.609
  • 91 12427TAttaches over the shift cable and aids in proper shift cable adjustment at the shift plate. For MCM Bravo One and Bravo Two models.

• LIFTING EYE - ZEUS POD

  Kılavuz s.609
  • 10 8M0080049Attaches to transmission. For installation or removal of the Zeus Transmissions.

• OUTBOARD ENGINE LIFTING EYE

  Kılavuz s.609
  • 91 904551Threads into the flywheel to remove the power head assembly from the driveshaft housing, or to lift entire engine for removal/installation. Fits most 2 cycle Mercury/Mariner Outboards from the 30/40 (2 cylinder) on up.

• LIFTING EYE/FLYWHEEL PULLER

  Kılavuz s.609
  • 91 895343T02A combination tool utilized for both lifting the engine and for pulling the flywheel. Fits the 75-115 hp. FourStroke outboards (s/n 1B366823 and above), 135-400 hp. Verado outboards, and the F150 EFI FourStroke outboard. Verado 400R outboard.

• ALIGNMENT TOOL

  Kılavuz s.609
  • 91 8M0180314New V12 dual prop shaft alignment tool. Multiple engine applications. Must order minimum quantity of 2.

• DRIVE ALIGNMENT TOOL

  Kılavuz s.609
  • 91 8M0029055Used with Axius, Zeus, JPS and MerCruiser electric steering to align the drives with the boat. Two pieces required for alignment. Also compatible with Bravo 3 tiebar.

• TOOL- DRIVE ALIGNMENT

  Kılavuz s.609
  • 91 8M0182653Outboard 1" and 1.2" prop shaft alignment tool for multiple engine applications. Must order minimum quantity 2.

• TOOL- SERVICE HARNESS

  Kılavuz s.609
  • 91 892333Service Harness

• BOAT HARNESS ADAPTER

  Kılavuz s.610
  • 84 898285T01Needed in order to adapt newer engines that are equipped with a female 6-pin connector to a 6-pin female boat harness.

• LICENSE KEY - G3.

  Kılavuz s.610
  • 8M0225978License Key - G3

• GEARCASE HEIGHT TOOL KIT

  Kılavuz s.610
  • 91 8M0130705Engine and gearcase height measurement tool. Measures engine (gearcase) height in reference to the boat bottom. All engine gearcase types.

• LIFTING STRAP

  Kılavuz s.610
  • 91 883705T01An engine lifting strap for handling of the various FourStroke outboards. Fits 225 EFI, V6 (3.4L), V8 (4.6L) and V10 (5.7L) FourStroke outboards.

• GEARCASE FILLER PLUGS

  Kılavuz s.610
  • 22 8M0163134Used to fix gearcase water pressure issues with the dual water inlet gearcase not supplying adequate water prssure and flow to the engine at the high installation "X" dimension heights that were used with the low water inlet gearcase. Fits O/B & MCM Bravo gearcases with dual water pickups

• 2ND STATION DELIVERY HARNESS KIT - SINGLE

  Kılavuz s.610
  • 98 8M01699042nd station delivery harness kit, single.

• 2ND STATION DELIVERY HARNESS KIT - DUAL

  Kılavuz s.610
  • 98 8M01699052nd station delivery harness kit, dual.

• 2ND STATION DELIVERY HARNESS KIT - TRIPLE

  Kılavuz s.610
  • 98 8M01699062nd station delivery harness kit, triple.

• 2ND STATION DELIVERY HARNESS KIT - QUAD

  Kılavuz s.610
  • 98 8M01699072nd station delivery harness, quad.

• POWER STEERING PRIMER MODULE

  Kılavuz s.610
  • 91 895040K01Used to prep the Power Steering system. Module allows pump to be run without starting engine. Allows bleeding and testing of power Steering system out of the water. Verado Engines 200-300 HP- Optional on 135-200 HP

• 14 PIN FEMALE WEATHER CAP

  Kılavuz s.610
  • 8M0126960Heavy Duty 14 pin Female Weather Cap. Reusable weather cap used to protect the integrity of the 14 pin data cable when connections are not able to be immediately made.

• 14 PIN MALE WEATHER CAP

  Kılavuz s.611
  • 8M0126959Heavy Duty 14 pin Male Weather Cap. Reusable weather cap used to protect the integrity of the 14 pin data cable when connections are not able to be immediately made.