Accessory Guide

SMARTCRAFT GAUGE HARNESSES

• SC1000 SYSTEM TACHOMETER HARNESS

  Guide p.520
  • 84 879979T113 ft. (.9 meters) Tachometer Harness. Provides connection to SC1000 System Tachometer, horn and SC100 Series Gauges. Requires the use of SmartCraft Junction Boxes listed in SC1000 Section.

• 3 FOOT SMARTCRAFT EXTENSION HARNESS

  Guide p.520
  • 84 8M0138593All 10 pins are populated in this SmartCraft 3 foot extension harness. Used to extend SmartCraft connections up to 3 feet.

• DUAL ENGINE INSTRUMENT ADAPTER

  Guide p.520
  • 84 892323T01Allows gauges to be powered from any key switch on dual applications. Works with all SmartCraft compatible engines.

• TRIPLE ENGINE INSTRUMENT ADAPTER

  Guide p.520
  • 84 892323T08Allows gauges to be powered from any key switch on triple applications. Works with all SmartCraft compatible engines.

• HARNESS ASSEMBLY- DUAL

  Guide p.520
  • 84 892323A10Racing Dual engine Mechanical jbox adapter with CANP link and diodes. Use with racing mech 14 pin helm harness.

• QUAD ENGINE INSTRUMENT ADAPTER

  Guide p.520
  • 84 898284T01Allows gauges to be powered from any key switch on triple applications. Works with all SmartCraft compatible engines.

• TROLL CONTROL Y HARNESS

  Guide p.520
  • 84 8M0042976Y harness allows you to connect directly to main engine harness and the Troll Control kit without using a "J" box. Mechanical 14pin CANP breakout harness only. Not compatible with Next Gen DTS or any other CANH system. Used with Troll Control Kit 879365K08 (879365A08).

SC 100 LINK HARNESSES

• SYSTEM LINK ADAPTER KIT

  Guide p.520
  • 84 8M0052774Kit that drives SC100 Link Gauges from 10 Pin connection at the helm. Contains 10 pin to 3 pin adapter and 3 pin to 3 pin low voltage reset module. Engine must be capable of providing Tach Link output and gray analog tach wire must be populated in 10 pin connection at helm in order to utilize this kit.

• SYSTEM LINK RESET HARNESS

  Guide p.521
  • 898289T42Resets SC 100 gauges in the event of voltage drops due to starting engine with a low/weak battery. Use in conjunction with System Link Harness (84-892821K01). SmartCraft SC 100 gauges

• SC 100 DATA HARNESS

  Guide p.521
  • 84 880756T056 in. SmartCraft Extension Harness Provides data link extension between SC100 Series products.

• SC 100 DATA HARNESS

  Guide p.521
  • 84 880756T11 ft. (.3 meters) SmartCraft Extension Harness Provides data link extension between SC100 Series products.
  • 84 8M02107593 ft. (.9 meters) SmartCraft Extension Harness Provides data link extension between SC100 Series products.
  • 84 880756T1010 ft. (3.0 meters) SmartCraft Extension Harness Provides data link extension between SC100 Series products.
  • 84 880756T3030 ft. (9.1 meters) SmartCraft Extension Harness Provides data link extension between SC100 Series products.

INSTRUMENT HARNESSES

Harnesses have ring terminal leads bundled for each gauge.

• IGNITION HARNESS - NON DTS 14 PIN

  Guide p.521
  • 84 896537T022 ft. harness (896537A02) with new 14 pin connector for the engine and additional connectors that allow easy quick connect solutions to the rigging process. Loose harness. Analog gauges also require the use of harness 84-892990T01, T10 or T15. 2006 and newer Non DTS Outboards from 25 HP to 250 HP-14 Pin Connectors. All MCM / MIE engines equipped with 14 pin connectors.
  • 84 896537T088 ft. harness (896537A08) with new 14 pin connector for the engine and additional connectors that allow easy quick connect solutions to the rigging process. Loose harness. Analog gauges also require the use of harness 84-892990T01, T10 or T15. 2006 and newer Non DTS Outboards from 25 HP to 250 HP-14 Pin Connectors. All MCM / MIE engines equipped with 14 pin connectors.
  • 84 896537T1111 ft. harness (896537A11) with new 14 pin connector for the engine and additional connectors that allow easy quick connect solutions to the rigging process. Loose harness. Analog gauges also require the use of harness 84-892990T01, T10 or T15. 2006 and newer Non DTS Outboards from 25 HP to 250 HP-14 Pin Connectors. All MCM / MIE engines equipped with 14 pin connectors.
  • 84 896537T1515 ft. harness (896537A15) with new 14 pin connector for the engine and additional connectors that allow easy quick connect solutions to the rigging process. Loose harness. Analog gauges also require the use of harness 84-892990T01, T10 or T15. 2006 and newer Non DTS Outboards from 25 HP to 250 HP-14 Pin Connectors. All MCM / MIE engines equipped with 14 pin connectors.
  • 84 896537T2020 ft. harness (896537A20) with new 14 pin connector for the engine and additional connectors that allow easy quick connect solutions to the rigging process. Loose harness. Analog gauges also require the use of harness 84-892990T01, T10 or T15. 2006 and newer Non DTS Outboards from 25 HP to 250 HP-14 Pin Connectors. All MCM / MIE engines equipped with 14 pin connectors.
  • 84 896537T2425 ft. harness (896537A24) with new 14 pin connector for the engine and additional connectors that allow easy quick connect solutions to the rigging process. Loose harness. Analog gauges also require the use of harness 84-892990T01, T10 or T15. 2006 and newer Non DTS Outboards from 25 HP to 250 HP- 14 Pin Connectors. All MCM / MIE engines equipped with 14 pin connectors.
  • 84 896537T2930 ft. harness (896537A29) with new 14 pin connector for the engine and additional connectors that allow easy quick connect solutions to the rigging process. Loose harness. Analog gauges also require the use of harness 84-892990T01, T10 or T15. 2006 and newer Non DTS Outboards from 25 HP to 250 HP-14 Pin Connectors. All MCM / MIE engines equipped with 14 pin connectors.
  • 84 896537T4040 ft. harness (896537A40) with new 14 pin connector for the engine and additional connectors that allow easy quick connect solutions to the rigging process. Loose harness. Analog gauges also require the use of harness 84-892990T01, T10 or T15. 2006 and newer Non DTS Outboards from 25 HP to 250 HP-14 Pin Connectors. All MCM / MIE engines equipped with 14 pin connectors.

• HARNESS - NON DTS 14 PIN- ANALOG GAUGE

  Guide p.522
  • 84 892990T015 ft. long. This harness will connect directly to the non DTS harness at the helm. It will allow you to connect to analog gauges on the dash and allows the choke function to work on the 8/9.9/15/20 FourStroke carbureted outboards with serial numbers beginning with "0R." Used with 84-896537__ harness. 2006 and newer Non DTS Outboards from 25 HP to 250 HP-14 Pin Connectors. All MCM / MIE engines equipped with 14 pin connectors.
  • 84 892990T1010 ft. long. This harness will connect directly to the non DTS harness at the helm. It will allow you to connect to analog gauges on the dash. Used with 84-896537__ harness. 2006 and newer Non DTS Outboards from 25 HP to 250 HP- 14 Pin Connectors. All MCM/MIE engines equipped with 14 pin connectors.
  • 84 892990T1515 ft. long. This harness will connect directly to the non DTS harness at the helm. It will allow you to connect to analog gauges on the dash. Used with 84-896537__ harness. 2006 and newer Non DTS Outboards from 25 HP to 250 HP- 14 Pin Connectors. All MCM/MIE engines equipped with 14 pin connectors.

• HARNESS EXTENSION- 10 PIN

  Guide p.522
  • 84 8M0058668This harness extension will allow you to increase the length by 6 feet of the 10 pin drop for instruments. The extension will work with Side Mount controls as well as any 896537 series main engine/boat harness.

• CHOKE HARNESS

  Guide p.522
  • 84 896537T99Allows a 14 pin harness to provide choke function for a carbureted engine when a remote control is used. Use this harness only if there are no gauges to be hooked up.

• INSTRUMENT HARNESS

  Guide p.522
  • 84 812475A33 ft.(915 mm) 10 pin harness Fits 1986 and newer MCM/MIE gasoline engines.
  • 84 812475A2020 ft.(6.1 m) 10 pin harness Fits 1986 and newer MCM/MIE gasoline engines.
  • 84 812475A2525 ft.(7.62 m) 10 pin harness Fits 1986 and newer MCM/MIE gasoline engines.

• INSTRUMENT HARNESS

  Guide p.522
  • 84 8606181 m (3.3 ft.) harness, 21 pin Deutsch connector. Fits all diesel models.

• LIGHT - DASH MOUNTED - CATALYST MALFUNCTION

  Guide p.522
  • 8M0046481Light will go on indicating that a malfunction has occurred with your catalyst on your engine. This means you will need to get your engine serviced soon. Works similar to your check Engine light in your truck or car (harness to be sold separately). Harness numbers for single helms: (8M0048049, 8M0048054, 8M0048055, 8M0048056, 8M0048057, 8M0048058, 8M0048059). MerCruiser products that are equipped with a catalyst.

• HARNESS - MALFUNCTION LIGHT

  Guide p.523
  • 84 8M004804910 ft. harness to connect the OBDM malfunction light for single helm applications. All Mercruiser engines that have a catalyst
  • 84 8M004805415 ft. harness to connect the OBDM malfunction light for single helm applications. All Mercruiser engines that have a catalyst
  • 84 8M004805520 ft. harness to connect the OBDM malfunction light for single helm applications. All Mercruiser engines that have a catalyst
  • 84 8M004805625 ft. harness to connect the OBDM malfunction light for single helm applications. All Mercruiser engines that have a catalyst
  • 84 8M004805730 ft. harness to connect the OBDM malfunction light for single helm applications. All Mercruiser engines that have a catalyst
  • 84 8M004805840 ft. harness to connect the OBDM malfunction light for single helm applications. All Mercruiser engines that have a catalyst

• DUAL HELM HARNESS - MALFUNCTION LIGHT

  Guide p.523
  • 84 8M004804010 ft. harness to connect the OBDM malfunction light for dual helm applications. All Mercruiser engines that have a catalyst

INSTRUMENT EXTENSION HARNESSES (GAS ENGINES)

Fits 1986 and newer MCM/MIE gasoline engines.

• 3.4L/4.6L REPOWER HARNESS KIT

  Guide p.523
  • 84 8M0145987Make easy work of repowering that Optimax or Verado to the newer 3.4L V6 or 4.6L V8 Fourstroke engines. Kit contains a wide variety of harnesses: 4 pin depth extension harness, 2 pin clean power extension harness, 2 pin WIF extension harness, 6 pin fuel/paddle extension harness, 14 pin data cable extension harness, 10 pin blue data cable extension harness, 3 pin power steering extension harness and 10 pin male to male gender bender harness. Repower harness kit has a wide variety of harnesses tha

• INSTRUMENT EXTENSION HARNESS

  Guide p.523
  • 84 812441A1010 ft.(3.05 m) harness, 9 lead harness. Used as harness extension or to complete two station installations.
  • 84 812441A1515 ft.(4.57 m) harness, 9 lead harness. Used as harness extension or to complete two station installations.
  • 84 812441A2020 ft.(6.1 m) harness, 9 lead harness. Used as harness extension or to complete two station installations.

INSTRUMENT EXTENSION HARNESSES (DIESEL)

All 1994-2000 MCM/MIE diesel models (except D-Tronic models) require both an 8 lead and a 9 lead extension harness to connect instumentation to the engine.

• EXTENSION HARNESS

  Guide p.523
  • 84 17829A1010 ft. (3.05 m) harness, 8 lead harness.
  • 84 17829A2020 ft. (6.1 m) harness, 8 lead harness. Used as harness extension or to complete two station installations.

• INSTRUMENT EXTENSION HARNESS

  Guide p.524
  • 84 812441A1010 ft.(3.05 m) harness, 9 lead harness. Used as harness extension or to complete two station installations.
  • 84 812441A1515 ft.(4.57 m) harness, 9 lead harness. Used as harness extension or to complete two station installations.
  • 84 812441A2020 ft.(6.1 m) harness, 9 lead harness. Used as harness extension or to complete two station installations.

• INSTRUMENT EXTENSION HARNESS

  Guide p.524
  • 84 85539020 ft.(6 m) harness Fits (1997-2000) D2.8L and D4.2L Electronic diesel models

• INSTRUMENT EXTENSION HARNESS

  Guide p.524
  • 84 8606150024 m (13.2 ft.) harness, 21 pin Deutsch connector Fits D1.7L , 2001 and newer D4.2L, D2.8L and 4.2L ES and EI; 1997 and newer D7.3L ES diesel models.

• HARNESS ADAPTER

  Guide p.524
  • 84 86062221 pin female Deutsch connector to 8 pin & 9 pin female connector. Adapts newer diesel engines with 21 pin Deutsch connector engine harnesses to older diesel engines instrument harness with the 8 pin & 9 pin connectors.

• HARNESS ADAPTER

  Guide p.524
  • 84 860625Adapts engine harness 84-855509 or 84-803626 (used on 1997 & up D2.8L and D4.2L ES and EI diesel models) to extension harnesses 84-860615 or 84-860616. 21 pin to 17 pin connector.

14 PIN DATA HARNESSES

• EXTENSION HARNESS - 14 PIN

  Guide p.524
  • 84 892451T066 ft. (1.8 meter) data harness. Provides data link between DTS engines and Next Gen DTS remote control harnesses. Works with all engines equipped with 14-pin connectors.
  • 84 892451T1010 ft. (3.0 meter) data harness. Provides data link between DTS engines and Next Gen DTS remote control harnesses. Works with all engines equipped with 14-pin connectors.
  • 84 892451T1515 ft. (4.6 meter) data harness. Provides data link between DTS engines and Next Gen DTS remote control harnesses. Works with all engines equipped with 14-pin connectors.
  • 84 892451T2020 ft. (6.1 meter) data harness. Provides data link between DTS engines and Next Gen DTS remote control harnesses. Works with all engines equipped with 14-pin connectors.
  • 84 892451B2020 ft. (6.1 meter) data harness. Provides data link between DTS engines and Next Gen DTS remote control harnesses. Bulk Pack - 6 harnesses to a box. Works with all engines equipped with 14-pin connectors. Priced individually, sold @ multiples of 6
  • 84 892451T2525 ft. (7.6 meter) data harness. Provides data link between DTS engines and Next Gen DTS remote control harnesses. Works with all engines equipped with 14-pin connectors.
  • 84 892451T3030 ft. (9.1 meter) data harness. Provides data link between DTS engines and Next Gen DTS remote control harnesses. Works with all engines equipped with 14-pin connectors.
  • 84 8M014964035 ft. (10.7 meter) data harness. Provides data link between DTS engines and DTS Next Gen remote control harnesses. Works with all engines equipped with 14-pin connectors.

• 14 PIN DATA HARNESS

  Guide p.525
  • 84 8M01467425ft. Low Loss, All 14 PIN Engines, Data Harness. Scenarios when Low Loss cables are required - for harness length where the overall data cable run from engine to helm is 35 ft. or more, all multi-helm applications, all Joystick piloting and electric steering helm applications, and all applications with three or more engines. All 14 Pin Engines
  • 84 8M014674310 ft. Low Loss, all 14 pin Engine, Data Harness. Scenarios when Low Loss cables are required - for harness length where the overall data cable run from engine to helm is 35 ft. or more, all multi-helm applications, all Joystick piloting and electric steering helm applications, and all applications with three or more engines. All 14 Pin Engines
  • 84 8M014674415 ft. Low Loss, all 14 pin Engine, Data Harness. Scenarios when Low Loss cables are required - for harness length where the overall data cable run from engine to helm is 35 ft. or more, all multi-helm applications, all Joystick piloting and electric steering helm applications, and all applications with three or more engines. All 14 Pin Engines
  • 84 8M014674520 ft. Low Loss, all 14 pin Engine, Data Harness. Scenarios when Low Loss cables are required - for harness length where the overall data cable run from engine to helm is 35 ft. or more, all multi-helm applications, all Joystick piloting and electric steering helm applications, and all applications with three or more engines. All 14 Pin Engines

• 14 PIN DATA HARNESS

  Guide p.525
  • 84 8M014674625 ft. Low Loss, all 14 pin Engine, Data Harness. Scenarios when Low Loss cables are required - for harness length where the overall data cable run from engine to helm is 35 ft. or more, all multi-helm applications, all Joystick piloting and electric steering helm applications, and all applications with three or more engines. All 14 Pin Engines
  • 84 8M014674730 ft. Low Loss, all 14 pin Engine, Data Harness. Scenarios when Low Loss cables are required - for harness length where the overall data cable run from engine to helm is 35 ft. or more, all multi-helm applications, all Joystick piloting and electric steering helm applications, and all applications with three or more engines. All 14 Pin Engines
  • 84 8M014674835 ft. Low Loss, all 14 pin Engine, Data Harness. Scenarios when Low Loss cables are required - for harness length where the overall data cable run from engine to helm is 35 ft. or more, all multi-helm applications, all Joystick piloting and electric steering helm applications, and all applications with three or more engines. All 14 Pin Engines
  • 84 8M014674940 foot 14-pin Low Loss Data Harness All 14 Pin Engines

• 14 PIN DATA HARNESS

  Guide p.525
  • 84 8M014675045 ft. Low Loss, all 14 pin Engine, Data Harness. Scenarios when Low Loss cables are required - for harness length where the overall data cable run from engine to helm is 35 ft. or more, all multi-helm applications, all Joystick piloting and electric steering helm applications, and all applications with three or more engines. All 14 Pin Engines
  • 84 8M014675150 ft. Low Loss, all 14 pin Engine, Data Harness. Scenarios when Low Loss cables are required - for harness length where the overall data cable run from engine to helm is 35 ft. or more, all multi-helm applications, all Joystick piloting and electric steering helm applications, and all applications with three or more engines. All 14 Pin Engines
  • 84 8M014675255 ft. Low Loss, all 14 pin Engine, Data Harness. Scenarios when Low Loss cables are required - for harness length where the overall data cable run from engine to helm is 35 ft. or more, all multi-helm applications, all Joystick piloting and electric steering helm applications, and all applications with three or more engines. All 14 Pin Engines
  • 84 8M014675360 ft. Low Loss, all 14 pin Engine, Data Harness. Scenarios when Low Loss cables are required - for harness length where the overall data cable run from engine to helm is 35 ft. or more, all multi-helm applications, all Joystick piloting and electric steering helm applications, and all applications with three or more engines. All 14 Pin Engines

• 14 PIN DATA HARNESS

  Guide p.525
  • 84 8M014675470 ft. Low Loss, all 14 pin Engine, Data Harness. Scenarios when Low Loss cables are required - for harness length where the overall data cable run from engine to helm is 35 ft. or more, all multi-helm applications, all Joystick piloting and electric steering helm applications, and all applications with three or more engines. All 14 Pin Engines
  • 84 8M014675580 ft. Low Loss, all 14 pin Engine, Data Harness. Scenarios when Low Loss cables are required - for harness length where the overall data cable run from engine to helm is 35 ft. or more, all multi-helm applications, all Joystick piloting and electric steering helm applications, and all applications with three or more engines. All 14 Pin Engines
  • 84 8M014675690 ft. Low Loss, all 14 pin Engine, Data Harness. Scenarios when Low Loss cables are required - for harness length where the overall data cable run from engine to helm is 35 ft. or more, all multi-helm applications, all Joystick piloting and electric steering helm applications, and all applications with three or more engines. All 14 Pin Engines
  • 84 8M0146757100 ft. Low Loss, all 14 pin Engine, Data Harness. Scenarios when Low Loss cables are required - for harness length where the overall data cable run from engine to helm is 35 ft. or more, all multi-helm applications, all Joystick piloting and electric steering helm applications, and all applications with three or more engines. All 14 Pin Engines
  • 84 8M0146758110 ft. Low Loss, all 14 pin Engine, Data Harness. Scenarios when Low Loss cables are required - for harness length where the overall data cable run from engine to helm is 35 ft. or more, all multi-helm applications, all Joystick piloting and electric steering helm applications, and all applications with three or more engines. All 14 Pin Engines
  • 84 8M0146759120 ft. Low Loss, all 14 pin Engine, Data Harness. Scenarios when Low Loss cables are required - for harness length where the overall data cable run from engine to helm is 35 ft. or more, all multi-helm applications, all Joystick piloting and electric steering helm applications, and all applications with three or more engines. All 14 Pin Engines

10 PIN (YELLOW) DATA HARNESSES

• CAN DATA HARNESS - 10 PIN - NO RESISTORS DTS (YELLOW)

  Guide p.526
  • 84 879312T441 ft. (0.3 meter) SmartCraft data harness without resistors. Contains CAN 1, 2, and 3. Provides data link between SmartCraft System CAN Bus components on DTS applications (Digital Throttle & Shift).
  • 84 879312T452 ft. (0.6 meter) SmartCraft data harness without resistors. Contains CAN 1, 2, and 3. Provides data link between SmartCraft System CAN Bus components on DTS applications (Digital Throttle & Shift).
  • 84 879312T463 ft. (0.9 meter) SmartCraft data harness without resistors. Contains CAN 1, 2, and 3. Provides data link between SmartCraft System CAN Bus components on DTS applications (Digital Throttle & Shift).
  • 84 879312T474 ft. (1.2 meter) SmartCraft data harness without resistors. Contains CAN 1, 2, and 3. Provides data link between SmartCraft System CAN Bus components on DTS applications (Digital Throttle & Shift).

• CAN DATA HARNESS - 10 PIN - NO RESISTORS DTS (YELLOW)

  Guide p.526
  • 84 8M02107576 ft. (1.8 meter) SmartCraft data harness without resistors. Contains CAN 1, 2, and 3. Provides data link between SmartCraft System CAN Bus components on DTS applications (Digital Throttle & Shift).

• CAN DATA HARNESS - 10 PIN - NO RESISTORS (YELLOW)

  Guide p.526
  • 84 879969T1010 ft. (3.0 meter) SmartCraft data harness without resistors Provides data link between SmartCraft CAN P, X and H components.
  • 84 879969T1515 ft. (4.6 meter) SmartCraft data harness without resistors Provides data link between SmartCraft CAN P, X and H components.
  • 84 879969T2020 ft. (6.1 meter) SmartCraft data harness without resistors Provides data link between SmartCraft CAN P, X and H components.
  • 84 879969T3030 ft. (9.1 meter) SmartCraft data harness without resistors Provides data link between SmartCraft CAN P, X and H components.

• CAN DATA HARNESS - 10 PIN - NO RESISTORS (YELLOW)

  Guide p.526
  • 84 8M016662440 ft. (12.1 meter) SmartCraft data harness without resistors. Provides data link between SmartCraft CAN P, X and H components

• CAN DATA HARNESS - 10 PIN WITH ONE RESISTOR (YELLOW)

  Guide p.526
  • 84 879980T1010 ft. (3.0 meter) SmartCraft data harness with one resistor Provides data link between SmartCraft CAN P, X and H components.
  • 84 879980T1515 ft. (4.6 meter) SmartCraft data harness with one resistor Provides data link between SmartCraft CAN P, X and H components.
  • 84 879980T3030 ft. (9.1 meter) SmartCraft data harness with one resistor Provides data link between SmartCraft CAN P, X and H components.

10 PIN (BLUE) DATA HARNESSES

• CAN DATA HARNESS - 10 PIN NON DTS WITH RESISTORS (BLUE)

  Guide p.526
  • 84 879982T2020 ft. (6.1 meter) SmartCraft data harness with (2) termination resistors Includes connections for horn and link gauge. Provides data link between SmartCraft CAN P Components.
  • 84 879982B2020 ft. (6.1 meter) SmartCraft data harness with (2) termination resistors Includes connections for horn and link gauge. Provides data link between SmartCraft CAN P Components. Priced individually, sold @ multiples of 12
  • 84 879982T2525 ft. (7.6 meter) SmartCraft data harness with (2) termination resistors Includes connections for horn and link gauge. Provides data link between SmartCraft CAN P Components.
  • 84 879982T3030 ft. (9.1 meter) SmartCraft data harness with (2) termination resistors Includes connections for horn and link gauge. Provides data link between SmartCraft CAN P Components.

• CAN DATA HARNESS - 10 PIN - NO RESISTORS NON DTS (BLUE)

  Guide p.527
  • 84 879968T66 ft. (1.8 meter) SmartCraft data harness without resistors and no additional connections Provides data link between SmartCraft CAN P Components.
  • 84 879968T1010 ft. (3.0 meter) SmartCraft data harness without resistors and no additional connections Includes connections for horn and link gauge. Provides data link between SmartCraft CAN P Components.
  • 84 879968T1515 ft. (4.6 meter) SmartCraft data harness without resistors and no additional connections Provides data link between SmartCraft System CAN Bus Components
  • 84 879968T2020 ft. (6.1 meter) SmartCraft data harness without resistors and no additional connections Provides data link between SmartCraft System CAN Bus Components
  • 84 879968T3030 ft. (9.1 meter) SmartCraft data harness without resistors and no additional connections Provides data link between SmartCraft System CAN Bus Components
  • 84 879968T5050 ft (15.2 meter) SmartCraft data harness without resistors and no additional connections Provides data link between SmartCraft System CAN Bus Components

• CAN DATA HARNESS - 10 PIN - ONE RESISTOR NON DTS (BLUE)

  Guide p.527
  • 84 879981T1010 ft. (3.0 meter) SmartCraft data harness with one resistor Provides data link between SmartCraft System CAN Bus Components
  • 84 879981T1515 ft. (4.6 meter) SmartCraft data harness with one resistor Provides data link between SmartCraft System CAN Bus Components
  • 84 879981T2020 ft. (6.1 meter) SmartCraft data harness with one resistor Provides data link between SmartCraft System CAN Bus Components
  • 84 879981B2020 ft. (6.1 meter) SmartCraft data harness with one resistor Provides data link between SmartCraft System CAN Bus Components Priced individually, sold @ multiples of 12
  • 84 879981T2525 ft. (7.6 meter) SmartCraft data harness with one resistor Provides data link between SmartCraft System CAN Bus Components
  • 84 879981T3030 ft. (9.1 meter) SmartCraft data harness with one resistor Provides data link between SmartCraft System CAN Bus Components
  • 84 879981T5050 ft. (15.2 meter) SmartCraft data harness with one resistor Provides data link between SmartCraft System CAN Bus Components

ADAPTER HARNESSES - 14 PIN

• ADAPTER HARNESS

  Guide p.527
  • 84 8M013766710 pin Jbox male pins to 5 pin N2K male pins Kvaser Diagnostic cable for use with G3 cable and Czone programming.

ADAPTER HARNESSES - 2 PIN

• 2 PIN LINK HARNESS- CAN

  Guide p.527
  • 84 893452A01Used to link CAN Networks together.

• 2 PIN "Y" ADAPTER HARNESS - LINK ADAPTER

  Guide p.527
  • 84 896370T01Used on DTS engines that require extended length CAN networks.

ADAPTER HARNESSES

• ADAPTER - NON DTS 14 PIN TO 8 PIN

  Guide p.527
  • 84 896539T011 ft. adapter that allows you to connect a 14 pin (Female) boat harness to an 8 pin (Male) engine connection. Includes bracket and screws. 2006 and newer Non DTS Outboards from 25 Hp to 250 HP- 14 Pin Connectors
  • 84 896539T055 ft. adapter that allows you to connect a 14 pin (Female) boat harness to a 8 pin (Male) engine connection. Includes bracket and screws. 2006 Non DTS Outboards from 25 Hp to 250 HP- 14 pin connector
  • 84 896539T088 ft. adapter that allows you to connect a 14 pin (Female) boat harness to a 8 pin (Male) engine connection. Includes bracket and screws. 2006 Non DTS Outboards from 25 Hp to 250 HP- 14 pin connector

• ADAPTER - NON DTS 8 PIN TO 14 PIN

  Guide p.528
  • 84 896542T011 ft. 15hp-20hp adapter that allows you to connect 8 pin (Female) boat harness to the 14 pin (Male) engine connection. Includes bracket and screws. 2006 Non DTS Outboards from 25 Hp to 250 HP- 14 pin connector
  • 84 896542T055 ft. adapter that allows you to connect 8 pin (Female) boat harness to the 14 pin (Male) engine connection. Includes bracket and screws. 2006 Non DTS Outboards from 25 Hp to 250 HP- 14 pin connector

• ADAPTER - NON DTS 8 PIN TO 14 PIN

  Guide p.528
  • 84 896542T088 ft. adapter that allows you to connect 8 pin (Female) boat harness to the 14 pin (Male) engine connection. Includes bracket and screws. 2006 Non DTS Outboards from 25 Hp to 250 HP- 14 pin connector

• ADAPTER - NON DTS 10 PIN TO 14 PIN

  Guide p.528
  • 84 858740T066 ft. adapter that allows you to connect 10 pin (Female) boat harness to the 14 pin (Female) engine connection. 2006 Non DTS 75, 90, 115 HP 4 stroke EFI

• ADAPTER - NON DTS 8 PIN TO 14 PIN

  Guide p.528
  • 84 896540T013 ft. adapter that allows you to connect 8 pin (Male) boat harness to the 14 pin (Male) engine connection. 2005, 2006 - 8/9.9 HP 4 stroke and newer

• ADAPTER - NON DTS 14 PIN TO 8 PIN - 3 FT

  Guide p.528
  • 84 896541T013 ft. adapter that allows you to connect 14 pin (Female) boat harness to the 8 pin (Female) engine connection. 2005, 2006 - 8/9.9 HP 4 stroke and newer

• ADAPTER - NON DTS 14 PIN TO 8 PIN - 5 FT

  Guide p.528
  • 84 896541T055 ft. adapter that allows you to connect 14 pin (Female) boat harness to the 8 pin (Female) engine connection. 2005, 2006 - 8/9.9 HP 4 stroke and newer

• ADAPTER - NON DTS 14 PIN TO 8 PIN - 8 FT

  Guide p.528
  • 84 8M01270188 ft. adapter that allows you to connect 14 pin (Female) boat harness to the 8 pin (Female) engine connection. 2005, 2006 - 8/9.9 HP 4 stroke and newer

• ADAPTER - NON DTS 14 PIN TO 8 PIN

  Guide p.528
  • 84 892092T011 ft. adapter that allows you to connect 14 pin (Female) boat harness to the 8 pin (Male) engine connection. Older Outboards that are SmartCraft compatible engines

• ADAPTER-NON DTS 10 PIN TO 14 PIN W/SMARTCRAFT CAN DATA

  Guide p.528
  • 84 8M0153356Adapter allows connection of 10-pin engine harness to a 14-pin boat harness when using SmartCraft gauges. This adapter includes a 10-pin CAN output to drive SmartCraft gauges using the 14-pin boat harness without having to install a blue CAN data harness. A termination resistor 859318T1 is required, and may be ordered separately. This is required for Quicksilver and Mercury Remanufacturing Plus Series 10-pin engines when installed in boats using SmartCraft gauges that use a 14-pin boat harness.

• ADAPTER - NON DTS 14 PIN TO 10 PIN

  Guide p.529
  • 84 866337T01Adapter that allows you to connect engines that have the newer 14 pin engine harness to the older 10 pin helm harness. MCM/MIE engines that have the 14 pin engine harness. Also used on Race product (outboards only) that have a 14 pin engine harness being connected to a 10 pin helm harness.

• ADAPTER HARNESS- ANALOG GAUGE - MCM

  Guide p.529
  • 84 866377T01Mounts between the 14 pin Command Module harness and the data harness. DTS- MCM only

• ADAPTER HARNESS

  Guide p.529
  • 84 8M013766710 pin Jbox male pins to 5 pin N2K male pins Kvaser Diagnostic cable for use with G3 cable and Czone programming.

ACCESSORY HARNESSES

• DTS CLEAN POWER - HELM - 10 FT

  Guide p.529
  • 84 8M012768110 ft. DTS clean power for use at the helm. All DTS and Joystick applications. When crank batteries are located near the helm or mitigation of excessive voltage drop is desired.

• DTS CLEAN POWER - HELM - 15 FT

  Guide p.529
  • 84 8M012768215 ft. DTS clean power for use at the helm. All DTS and Joystick applications. When crank batteries are located near the helm or mitigation of excessive voltage drop is desired.

• DTS CLEAN POWER - HELM - 25 FT

  Guide p.529
  • 84 896333T2525 ft. DTS clean power for use at the helm. All DTS and Joystick applications. When crank batteries are located near the helm or mitigation of excessive voltage drop is desired.

• POWER HARNESS-ENGINE

  Guide p.529
  • 84 8M011373215 ft. DTS clean power harness. Used when battery is located near the the engine. Connects to 2 pin clean power connector on the engine. All L4 SC Verados, 200/225 Opti DTS, 20 in. L6 Verados and MCM DTS and EC engines have this harness as part of the engine package. Must order loose for 25 in. and 30 in. L6 Verados.

• HARNESS ASSEMBLY

  Guide p.529
  • 84 8M020779025 ft Clean Power harness with heavy gauge (10 ga) wire for lower voltage drop. Use from crank battery to 2 pin connector on engine. DTS and MCM EC engines.

• ACCESSORY POWER HARNESS / RELAY HARNESS KIT

  Guide p.529
  • 84 899785K15Used to provide accessory power to auxiliary loads when the keyswitch is in the "Run" or "Accessory" positions. Includes 40 amp relay, harness and 15 ft. power cable with 40 amp fuse and three pole terminal block. Used on 14-pin boat harnesses that have a 3-pin accessory power relay connector.

• ACCESSORY POWER HARNESS / RELAY HARNESS KIT

  Guide p.530
  • 84 899785K30Used to provide accessory power to auxiliary loads when the keyswitch is in the "Run" or "Accessory" positions. Includes 40 amp relay, harness and 30 ft. power cable with 40 amp fuse and three pole terminal block. Used on 14-pin boat harnesses that have a 3-pin accessory power relay connector.

• ACCESSORY POWER HARNESS KIT

  Guide p.530
  • 84 899785K04Accessory power cable is designed to connect battery to terminal block to provide connection point and power auxiliary loads. Includes 30 ft. power cable with 40 amp fuse and 3 pole terminal block. Used on 14-pin boat harnesses that have a 3-pin accessory power relay connector.

• ACCESSORY POWER HARNESS KIT

  Guide p.530
  • 84 899785K02Accessory power cable is designed to connect battery to terminal block to provide connection point and power auxiliary loads. Includes 15 ft. power cable with 40 amp fuse and 3 pole terminal block. Used on 14-pin boat harnesses that have a 3-pin accessory power relay connector.

• ACCESSORY RELAY KIT

  Guide p.530
  • 84 888429K11Used in conjunction with accessory power harness to provide power to auxiliary loads. Used on 14-pin boat harnesses that have a 3-pin accessory power relay connector.

• TERMINAL BLOCK

  Guide p.530
  • 86 8M02047013 pole terminal block Useful for up to 40 Amp circuit connections, used in Accessory Power kits

• ACCESSORY RELAY HARNESS KIT

  Guide p.530
  • 84 888429K12Used to provide accessory power to auxiliary loads. Cable is connected to the junction box and provides power to loads when the key switch in in the "Run" position. Includes 40 amp relay and harness.

• TVS NOISE SUPPRESSION HARNESS

  Guide p.530
  • 84 8M0072192Reduce noisy voltage spikes from Mercury solenoid coils (trim & tab). Kit contains 2 harnesses that are used across solenoid coils to help reduce electrical noise.

• HELM RACE HARNESS ASSEMBLY

  Guide p.530
  • 84 8M0074825Helm race harness assembly, 14pin (similar to non-DTS OB/MCM).

IGNITION KEY SWITCHES

• KEY SWITCH ASSEMBLY WITH CHOKE

  Guide p.531
  • 87 88107A133 ft. (915 mm) harness without audio warning horn. Has 6 pin connector that adapts to harness 84-896537K_ 14 pin harness. 3/4 inch cut out with housing. Used with 2 cycle engines that require push to choke feature.

• KEY SWITCH - 4 POSITION

  Guide p.531
  • 87 893353A02Four position keyswitch (Off, Accessory, Run and Start). Loose switch only. 7/8 inch cut out. Can be used on DTS as well as non DTS installations

• KEY SWITCH KIT - 4 POSITION W/MOUNTING HARDWARE

  Guide p.531
  • 87 893353A03Four position keyswitch (Off, Accessory, Run and Start). Includes keyswitch, key cover, bezel, 2 1/8 inch diameter mounting housing and mounting hardware. 7/8 inch cut out. Can be used on DTS as well as non DTS installations

• KEY SWITCH KIT - 4 POSITION MATCHED KEYS-DUALS

  Guide p.531
  • 87 893353A04Four position keyswitch- dual engines (Off, Accessory, Run and Start). Includes matched keyswitch, key cover, bezel, 2 1/8 inch diameter mounting housing and mounting hardware. 7/8 inch cut out. Dual engine - matched key set. Can be used on DTS as well as non DTS installations

• KEY SWITCH KIT - 4 POSITION MATCHED KEYS-DUALS

  Guide p.531
  • 87 893353T04Four position keyswitch- dual engines (Off, Accessory, Run and Start). Includes matched keyswitch and mounting hardware. 7/8 in. cut out. Does not include housing. Dual engine - matched key set. Can be used on DTS as well as non DTS installations.

• KEY SWITCH KIT - 4 POSITION MATCHED KEYS- TRIPLES

  Guide p.532
  • 87 893353A05Four position keyswitch- triple engines (Off, Accessory, Run and Start). Includes matched keyswitch, key cover, bezel, 2 1/8 inch diameter, mounting housing and mounting hardware. 7/8 inch cut out. Triple engine - matched key set

• KEY SWITCH KIT - 4 POSITION MATCHED KEYS- QUADS

  Guide p.532
  • 87 893353A06Four position keyswitch-Quad engines (Off, Accessory, Run and Start). Includes matched keyswitch, key cover, bezel, 2 1/8 in. diameter, mounting housing and mounting hardware. 7/8 in. cut out. Quad engine - matched key set

• KEY SWITCH - 3 POSITION WITH DECAL/WASHER

  Guide p.532
  • 87 897716K01Three position keyswitch with shorter key and mounting length (Off, Run and Start). Loose switch only. 3/4 inch cut out. Includes switch with decal and washer. Can be used on DTS as well as Non DTS installations.

• KEY SWITCH - 3 POSITION WITH DECAL/WASHER

  Guide p.532
  • 87 897716K02Three position keyswitch with shorter key and mounting length (Off, Run and Start). Loose switch only. 3/4 in. cut out. Includes switch with decal and washer. Matched set for dual engine installs. Can be used on DTS as well as Non DTS installations. Matched keyswitches for dual installations

• KEY SWITCH - 3 POSITION WITH DECAL/WASHER

  Guide p.532
  • 87 897716K03Three position keyswitch with shorter key and mounting length (Off, Run and Start). Loose switch only. 3/4 in. cut out. Includes switch with decal and washer. Matched Key set for Triple engine installs. Can be used on DTS as well as Non DTS installations. Matched keyswitches for Triple installations.

• KEY SWITCH - 3 POSITION WITH DECAL/WASHER

  Guide p.532
  • 87 897716K04Three position keyswitch with shorter key and mounting length (Off, Run and Start). Loose switch only. 3/4 in. cut out. Includes switch with decal and washer. Matched Key set for Quad engine installs. Can be used on DTS as well as Non DTS installations. Matched keyswitches for Quad installations

• KEY SWITCH - 3 POSITION HOUSING

  Guide p.532
  • 879305A01New keyswitch housing kit for 897716 series 3 position keyswitch. Kit includes 2 inch (52 MM) housing with mounting disc and bezel. Spin nut included in kit for easy mounting (Key Switch is not included in this kit). Can be used on DTS as well as Non DTS installations.

• KEY SWITCH EXTENSION - NO CRANK - 5 FT

  Guide p.532
  • 84 896691T055 ft. length. This extension is used when the remote mounting a keyswitch (no crank possible), only has off/on functions. Used on all DTS engines.

• KEY SWITCH EXTENSION - NO CRANK - 10 FT

  Guide p.533
  • 84 896691T1010 ft. length. This extension is used when the remote mounting a keyswitch (no crank possible). Only has off/on functions. Used on all DTS engines.

• KEY SWITCH EXTENSION - NO CRANK - 15 FT

  Guide p.533
  • 896691T1515 ft. length. This extension is used when the remote mounting a keyswitch (no crank possible), only has off/on functions. Used on all DTS engines.

• KEY SWITCH EXTENSION - NO CRANK - 20 FT

  Guide p.533
  • 84 879312T7720 ft. length. This extension is used when the remote mounting a keyswitch (no crank possible). Only has off/on functions. Used on all DTS engines.

• KEY SWITCH EXTENSION - NO CRANK - 30 FT

  Guide p.533
  • 84 879312T7830 ft. length. This extension is used when the remote mounting a keyswitch (no crank possible). Only has off/on functions. Used on all DTS engines.

• KEY SWITCH EXTENSION - NO CRANK - 40 FT

  Guide p.533
  • 84 879312T7940 ft. length. This extension is used when the remote mounting a keyswitch (no crank possible). Only has off/on functions. Used on all DTS engines.

• DECAL/WASHER KIT- 3 POSITION KEY SWITCH

  Guide p.533
  • 37 899203A01Ignition start decal/washer kit. Used with 897716K01 when not supplied in harness kit.

• KEY SWITCH ASSEMBLY

  Guide p.533
  • 87 88107A33 ft. (915 mm) harness without audio warning horn. Has bullet connectors that adapt to harness 84-84711M. Fits (Japanese origin) Mariner 30, 40 (2 cylinder - w/o integral oil injection) and 55 (2 cylinder) outboards used with optional remote controls.

• KEY SWITCH KIT

  Guide p.533
  • 87 88107A5Kit includes switch, two keys, crimp connectors to attach to wiring harness. Features push to choke with key. Fits into select Quicksilver side mount control boxes and other applications.

• KEY SWITCH KIT

  Guide p.533
  • 87 88107A10Three position keyswitch (Off, Run and Start). Includes keyswitch and mounting hardware. 2004 OptiMax 225 DTS outboards and 496 Mag MerCruiser DTS sterndrive and inboard engines.

• KEY SWITCH ASSEMBLY WITH CHOKE

  Guide p.533
  • 87 88107A133 ft. (915 mm) harness without audio warning horn. Has 6 pin connector that adapts to harness 84-896537K_ 14 pin harness. 3/4 inch cut out with housing. Used with 2 cycle engines that require push to choke feature.

• KEY SWITCH KIT

  Guide p.533
  • 87 88107T12Three position keyswitch (Off, Run and Start). Push to Choke Keyswitch. Used with 2 cycle engines that require push to choke feature.

• KEY SWITCH KIT

  Guide p.534
  • 87 893449T013 position Key Switch Kit

IGNITION KEY SWITCH WITH HARNESSES

Mounts in a 2-1/8 in. (54 mm) hole. Includes warning horn and electrical connections for power trim, instrumentation and lanyard stop switch.

• KEY SWITCH W/ HARNESS

  Guide p.534
  • 84 816626A22 ft. (610 mm) harness with audio warning horn.
  • 84 816626A88 ft. (2.44 m) harness with audio warning horn. Fits Mercury/Mariner 6 hp. and Higher (2 cycle, USA & BEL Origin) outboards, Mariner 30/40 hp. with oil injection (2 cycle, Japanese Origin), all Mercury/Mariner 4-Stroke (USA Origin) outboards, Force 40 hp. and Higher (1993 and Newer) and Mercury Jet Drives. When used with MY2005 and newer 8/9.9 hp. FourStroke outboards an adapter harness 892473A01 is required.
  • 84 816626A1111 ft. (3.35 m) harness with audio warning horn. Fits Mercury/Mariner 6 hp. and Higher (2 cycle, USA & BEL Origin) outboards, Mariner 30/40 hp. with oil injection (2 cycle, Japanese Origin), all Mercury/Mariner 4-Stroke (USA Origin) outboards, Force 40 hp. and Higher (1993 and Newer) and Mercury Jet Drives. When used with MY2005 and newer 8/9.9 hp. FourStroke outboards an adapter harness 892473A01 is required.
  • 84 816626A1515 ft. (4.57 m) harness with audio warning horn.
  • 84 816626A2020 ft. (6.1 m) harness with audio warning horn.
  • 84 816626A2425 ft. (7.6 m) harness with audio warning horn.
  • 84 816626A2525 ft. (7.6 m) harnesses with audio warning horn. Packaged with 2 harnesses with matched keys for dual engine applications. Fits Mercury / Mariner 6 hp. and Higher (2 cycle, USA & BEL Origin) outboards, Mariner 30/40 hp. with oil injection (2 cycle, Japanese Origin), all Mercury / Mariner 4-Stroke (USA Origin) outboards, Force 40 hp. and Higher (1993 and Newer) and Mercury Jet Drives.
  • 84 816626A2930 ft. (9.1 m) harnesses with audio warning horn. Fits Mercury / Mariner 6 hp. and Higher (2 cycle, USA & BEL Origin) outboards, Mariner 30/40 hp. with oil injection (2 cycle, Japanese Origin), all Mercury / Mariner 4-Stroke (USA Origin) outboards, Force 40 hp. and Higher (1993 and Newer) and Mercury Jet Drives.
  • 84 816626A3030 ft. (9.1 m) harnesses with audio warning horn. Packaged with 2 harnesses with matched keys for dual engine applications. Fits Mercury / Mariner 6 hp. and Higher (2 cycle, USA & BEL Origin) outboards, Mariner 30/40 hp. with oil injection (2 cycle, Japanese Origin), all Mercury / Mariner 4-Stroke (USA Origin) outboards, Force 40 hp. and Higher (1993 and Newer) and Mercury Jet Drives.

• 8 PIN KEY SWITCH AND IGNITION HARNESS

  Guide p.534
  • 84 8M01257482 ft. harness with horn, push to choke key switch, instrumentation connector, trim connector and lanyard connector. Connects to 8 pin AMP connector engines (8/9.9 HP FourStrokes and similar) -Single Engine Application.
  • 84 8M01257498 ft. harness with horn, push to choke key switch, instrumentation connector, trim connector and lanyard connector. Connects to 8 pin AMP connector engines (8/9.9 HP FourStrokes and similar) -Single Engine Application.
  • 84 8M012575011 ft. harness with horn, push to choke key switch, instrumentation connector, trim connector and lanyard connector. Connects to 8 pin AMP connector engines (8/9.9 HP FourStrokes and similar) -Single Engine Application.
  • 84 8M012575115 ft. harness with horn, push to choke key switch, instrumentation connector, trim connector and lanyard connector. Connects to 8 pin AMP connector engines (8/9.9 HP FourStrokes and similar) -Single Engine Application.
  • 84 8M012575220 ft. harness with horn, push to choke key switch, instrumentation connector, trim connector and lanyard connector. Connects to 8 pin AMP connector engines (8/9.9 HP FourStrokes and similar) -Single Engine Application.
  • 84 8M012575325 ft. harness with horn, push to choke key switch, instrumentation connector, trim connector and lanyard connector. Connects to 8 pin AMP connector engines (8/9.9 HP FourStrokes and similar) -Single Engine.
  • 84 8M012575530 ft. harness with horn, push to choke key switch, instrumentation connector, trim connector and lanyard connector. Connects to 8 pin AMP connector engines (8/9.9 HP FourStrokes and similar) single engine.

• 8 PIN KEY SWITCH AND IGNITION HARNESS

  Guide p.534
  • 84 8M012575425 ft. harness with horns, push to choke key switches, instrumentation connectors, trim connectors and lanyard connectors. Connects to 8 pin AMP connector engines (8/9.9 HP FourStrokes and similar) Dual Engine Application.
  • 84 8M012575630 ft. harness with horns, push to choke key switches, instrumentation connectors, trim connectors and lanyard connectors. Connects to 8 pin AMP connector engines (8/9.9 HP FourStrokes and similar).Dual Engine Application.

• KEY SWITCH W/ HARNESS - NON DTS 14 PIN

  Guide p.535
  • 84 896537K022 ft. harness (896537A02) with new 14 pin connector for the engine and additional connectors that allow easy quick connect solutions to the rigging process. Included in this kit is also the new 3 position water-proof high quality keyswitch (897716). 2006 and newer Non DTS Outboards from 25 HP to 250 HP- 14 Pin Connectors. All MCM / MIE engines equipped with 14 pin connectors.
  • 84 896537K088 ft. harness (896537A08) with new 14 pin connector for the engine and additional connectors that allow easy quick connect solutions to the rigging process. Included in this kit is also the new 3 position water-proof high quality keyswitch (897716). 2006 and newer Non DTS Outboards from 25 HP to 250 HP- 14 Pin Connectors. All MCM / MIE engines equipped with 14 pin connectors.
  • 84 896537K1111 ft. harness (896537A11) with new 14 pin connector for the engine and additional connectors that allow easy quick connect solutions to the rigging process. Included in this kit is also the new 3 position water-proof high quality keyswitch (897716). 2006 and newer Non DTS Outboards from 25 HP to 250 HP- 14 Pin Connectors. All MCM / MIE engines equipped with 14 pin connectors.
  • 84 896537K1515 ft. harness (896537A15) with new 14 pin connector for the engine and additional connectors that allow easy quick connect solutions to the rigging process. Included in this kit is also the new 3 position water-proof high quality keyswitch (897716). 2006 and newer Non DTS Outboards from 25 HP to 250 HP- 14 Pin Connectors. All MCM / MIE engines equipped with 14 pin connectors.
  • 84 896537K2020 ft. harness (896537A20) with new 14 pin connector for the engine and additional connectors that allow easy quick connect solutions to the rigging process. Included in this kit is also the new 3 position water-proof high quality keyswitch (897716). 2006 and newer Non DTS Outboards from 25 HP to 250 HP- 14 Pin Connectors. All MCM / MIE engines equipped with 14 pin connectors.
  • 84 896537K2425 ft. harness (896537A24) with new 14 pin connector for the engine and additional connectors that allow easy quick connect solutions to the rigging process. Included in this kit is also the new 3 position water-proof high quality keyswitch (897716). 2006 and newer Non DTS Outboards from 25 HP to 250 HP- 14 Pin Connectors. All MCM / MIE engines equipped with 14 pin connectors.
  • 84 896537K25Two 25 ft. harnesses (896537A24) with new 14 pin connector for the dual engine applications and additional connectors that allow easy quick connect solutions to the rigging process. Included in this kit is also the new 3 position water-proof high quality keyswitch (matched keyswitch for dual engine applications) (897716K02). 2006 and newer Non DTS Outboards from 25 HP to 250 HP- 14 Pin Connectors. All MCM / MIE engines equipped with 14 pin connectors.
  • 84 896537K2930 ft. harness (896537A29) with new 14 pin connector for the engine and additional connectors that allow easy quick connect solutions to the rigging process. Included in this kit is also the new 3 position water-proof high quality keyswitch (897716). 2006 and newer Non DTS Outboards from 25 HP to 250 HP-14 Pin Connectors. All MCM / MIE engines equipped with 14 pin connectors.
  • 84 896537K30Two 30 ft. harnesses (896537A29) with new 14 pin connector for the dual engine applications and additional connectors that allow easy quick connect solutions to the rigging process. Included in this kit is also the new 3 position water-proof high quality keyswitch (matched keyswitch for dual engine applications)(897716K02). 2006 and newer Non DTS Outboards from 25 HP to 250 HP-14 Pin Connectors. All MCM / MIE engines equipped with 14 pin connectors.
  • 84 896537K4040 ft. harness (896537A40) with new 14 pin connector for the engine and additional connectors that allow easy quick connect solutions to the rigging process. Included in this kit is also the new 3 position water-proof high quality keyswitch (897716). 2006 and newer Non DTS Outboards from 25 HP to 250 HP-14 Pin Connectors. All MCM / MIE engines equipped with 14 pin connectors.

• IGNITION HARNESS - NON DTS 14 PIN

  Guide p.535
  • 84 896537T022 ft. harness (896537A02) with new 14 pin connector for the engine and additional connectors that allow easy quick connect solutions to the rigging process. Loose harness. Analog gauges also require the use of harness 84-892990T01, T10 or T15. 2006 and newer Non DTS Outboards from 25 HP to 250 HP-14 Pin Connectors. All MCM / MIE engines equipped with 14 pin connectors.
  • 84 896537T088 ft. harness (896537A08) with new 14 pin connector for the engine and additional connectors that allow easy quick connect solutions to the rigging process. Loose harness. Analog gauges also require the use of harness 84-892990T01, T10 or T15. 2006 and newer Non DTS Outboards from 25 HP to 250 HP-14 Pin Connectors. All MCM / MIE engines equipped with 14 pin connectors.
  • 84 896537T1111 ft. harness (896537A11) with new 14 pin connector for the engine and additional connectors that allow easy quick connect solutions to the rigging process. Loose harness. Analog gauges also require the use of harness 84-892990T01, T10 or T15. 2006 and newer Non DTS Outboards from 25 HP to 250 HP-14 Pin Connectors. All MCM / MIE engines equipped with 14 pin connectors.
  • 84 896537T1515 ft. harness (896537A15) with new 14 pin connector for the engine and additional connectors that allow easy quick connect solutions to the rigging process. Loose harness. Analog gauges also require the use of harness 84-892990T01, T10 or T15. 2006 and newer Non DTS Outboards from 25 HP to 250 HP-14 Pin Connectors. All MCM / MIE engines equipped with 14 pin connectors.
  • 84 896537T2020 ft. harness (896537A20) with new 14 pin connector for the engine and additional connectors that allow easy quick connect solutions to the rigging process. Loose harness. Analog gauges also require the use of harness 84-892990T01, T10 or T15. 2006 and newer Non DTS Outboards from 25 HP to 250 HP-14 Pin Connectors. All MCM / MIE engines equipped with 14 pin connectors.
  • 84 896537T2425 ft. harness (896537A24) with new 14 pin connector for the engine and additional connectors that allow easy quick connect solutions to the rigging process. Loose harness. Analog gauges also require the use of harness 84-892990T01, T10 or T15. 2006 and newer Non DTS Outboards from 25 HP to 250 HP- 14 Pin Connectors. All MCM / MIE engines equipped with 14 pin connectors.
  • 84 896537T2930 ft. harness (896537A29) with new 14 pin connector for the engine and additional connectors that allow easy quick connect solutions to the rigging process. Loose harness. Analog gauges also require the use of harness 84-892990T01, T10 or T15. 2006 and newer Non DTS Outboards from 25 HP to 250 HP-14 Pin Connectors. All MCM / MIE engines equipped with 14 pin connectors.
  • 84 896537T4040 ft. harness (896537A40) with new 14 pin connector for the engine and additional connectors that allow easy quick connect solutions to the rigging process. Loose harness. Analog gauges also require the use of harness 84-892990T01, T10 or T15. 2006 and newer Non DTS Outboards from 25 HP to 250 HP-14 Pin Connectors. All MCM / MIE engines equipped with 14 pin connectors.

• HARNESS - NON DTS 14 PIN- ANALOG GAUGE

  Guide p.536
  • 84 892990T015 ft. long. This harness will connect directly to the non DTS harness at the helm. It will allow you to connect to analog gauges on the dash and allows the choke function to work on the 8/9.9/15/20 FourStroke carbureted outboards with serial numbers beginning with "0R." Used with 84-896537__ harness. 2006 and newer Non DTS Outboards from 25 HP to 250 HP-14 Pin Connectors. All MCM / MIE engines equipped with 14 pin connectors.
  • 84 892990T1010 ft. long. This harness will connect directly to the non DTS harness at the helm. It will allow you to connect to analog gauges on the dash. Used with 84-896537__ harness. 2006 and newer Non DTS Outboards from 25 HP to 250 HP- 14 Pin Connectors. All MCM/MIE engines equipped with 14 pin connectors.
  • 84 892990T1515 ft. long. This harness will connect directly to the non DTS harness at the helm. It will allow you to connect to analog gauges on the dash. Used with 84-896537__ harness. 2006 and newer Non DTS Outboards from 25 HP to 250 HP- 14 Pin Connectors. All MCM/MIE engines equipped with 14 pin connectors.

TRANSOM MOUNTED IGNITION KEYSWITCH

A transom mounted keyswitch allowing for activation of the starter solenoid, a choke or enrichner valve.

• TRANSOM MOUNTED IGNITION KEYSWITCH

  Guide p.536
  • 15000A7Includes a push-to-choke function and a warning horn. Has a 6 ft. (182 cm) cable length. Has an 8 pin engine connector. Fits many varying outboards and applications through Model Year 2005 where a keyswitch with warning horn and choke (enrichner) function is desired. Outboards require a remote control engine harness be used in conjunction with this switch in order for it to function. Warning horn feature is not present on all model outboards.

• TRANSOM MOUNTED IGNITION KEYSWITCH

  Guide p.536
  • 15000A14Includes a push-to-choke function and a warning horn. Has a 6 ft. (182 cm) cable length. Has the 14 pin engine connector. Fits many varying outboards and applications beginning in Model Year 2006 where a keyswitch with warning horn and choke (enrichner) function is desired. Outboards require a remote control engine harness be used in conjunction with this switch in order for it to function. Warning horn feature is not present on all model outboards.

• TRANSOM MOUNTED IGNITION KEYSWITCH

  Guide p.536
  • 87 8M0090402Includes a key function and a warning horn. Has a 6 ft. (182 cm) cable length. Has a 14 pin engine connector. Fits EFI outboards and applications after Model Year 2006 where a keyswitch with warning horn is desired. Outboards require a remote control engine harness be used in conjunction with this switch in order for it to function. Warning horn feature is not present on all model outboards. For EFI models only (14 pin connector engine) DOES NOT HAVE PUSH TO CHOKE

START / STOP SWITCHES

• SINGLE ENGINE START/STOP PAD

  Guide p.536
  • 87 8M0117136Low profile mount single engine start/stop pad which allows start and stop of engine with keyswitch in the RUN position. Can be used on all single engine DTS applications

• DUAL ENGINE START/STOP PAD

  Guide p.537
  • 87 8M0117137Low profile mount dual engine start/stop pad which allows start and stop of engines with keyswitches in the RUN position. Can be used on all dual engine DTS applications

• TRIPLE ENGINE START/STOP PAD

  Guide p.537
  • 87 8M0117138Low profile mount triple engine start/stop pad which allows start and stop of engines with keyswitches in the RUN position. Can be used on all triple engine DTS applications

• QUAD ENGINE START/STOP PAD - STARBOARD

  Guide p.537
  • 87 8M0117139Low profile mount quad engine start/stop pad (STBD) which allows start and stop of engines with keyswitches in the RUN position. Can be used on all quad engine DTS applications (STBD)

• QUAD ENGINE START/STOP PAD - PORT

  Guide p.537
  • 87 8M0117140Low profile mount quad engine start/stop pad (PORT) which allows start and stop of engines with keyswitches in the RUN position. Can be used on all quad engine DTS applications (PORT)

• BEZEL

  Guide p.537
  • 879315T01Black Start/Stop switch kit, flush mount. For single, dual, triple and quad application.

• START/STOP EXTENSION HARNESS

  Guide p.537
  • 84 896380T055 ft. Allows you to extend the harness an extra 5 ft. from the start/stop button. Compatible with 3pin extension if 10ft, 15ft, or 20ft start/stop extension needed. Used on all DTS engines.

KEY SWITCHES

• KEY SWITCH - 3 POSITION WITH DECAL/WASHER

  Guide p.537
  • 87 897716K01Three position keyswitch with shorter key and mounting length (Off, Run and Start). Loose switch only. 3/4 inch cut out. Includes switch with decal and washer. Can be used on DTS as well as Non DTS installations.

• KEY SWITCH - 3 POSITION WITH DECAL/WASHER

  Guide p.537
  • 87 897716K02Three position keyswitch with shorter key and mounting length (Off, Run and Start). Loose switch only. 3/4 in. cut out. Includes switch with decal and washer. Matched set for dual engine installs. Can be used on DTS as well as Non DTS installations. Matched keyswitches for dual installations

• KEY SWITCH - 4 POSITION

  Guide p.538
  • 87 893353A02Four position keyswitch (Off, Accessory, Run and Start). Loose switch only. 7/8 inch cut out. Can be used on DTS as well as non DTS installations

• KEY SWITCH KIT - 4 POSITION W/MOUNTING HARDWARE

  Guide p.538
  • 87 893353A03Four position keyswitch (Off, Accessory, Run and Start). Includes keyswitch, key cover, bezel, 2 1/8 inch diameter mounting housing and mounting hardware. 7/8 inch cut out. Can be used on DTS as well as non DTS installations

• KEY SWITCH KIT - 4 POSITION MATCHED KEYS-DUALS

  Guide p.538
  • 87 893353A04Four position keyswitch- dual engines (Off, Accessory, Run and Start). Includes matched keyswitch, key cover, bezel, 2 1/8 inch diameter mounting housing and mounting hardware. 7/8 inch cut out. Dual engine - matched key set. Can be used on DTS as well as non DTS installations

• KEY SWITCH KIT - 4 POSITION MATCHED KEYS- TRIPLES

  Guide p.538
  • 87 893353A05Four position keyswitch- triple engines (Off, Accessory, Run and Start). Includes matched keyswitch, key cover, bezel, 2 1/8 inch diameter, mounting housing and mounting hardware. 7/8 inch cut out. Triple engine - matched key set

• KEY SWITCH KIT - 4 POSITION MATCHED KEYS- QUADS

  Guide p.538
  • 87 893353A06Four position keyswitch-Quad engines (Off, Accessory, Run and Start). Includes matched keyswitch, key cover, bezel, 2 1/8 in. diameter, mounting housing and mounting hardware. 7/8 in. cut out. Quad engine - matched key set

• KEY SWITCH KIT - 4 POSITION MATCHED KEYS - QUINTS

  Guide p.538
  • 87 8M0077850Four position keyswitch-Quint engines (Off, Accessory, Run and Start). Includes matched keyswitch, key cover, bezel, 2 1/8 inch diameter mounting housing and mounting hardware. 7/8 inch cut out. Quint engine - matched key set

• KEY SWITCH KIT - 4 POSITION MATCHED KEYS - SIX ENGINE

  Guide p.538
  • 87 8M0157375Four position six matched keys

• KEY SWITCH EXTENSION - NO CRANK - 5 FT

  Guide p.538
  • 84 896691T055 ft. length. This extension is used when the remote mounting a keyswitch (no crank possible), only has off/on functions. Used on all DTS engines.

• KEY SWITCH EXTENSION - NO CRANK - 10 FT

  Guide p.539
  • 84 896691T1010 ft. length. This extension is used when the remote mounting a keyswitch (no crank possible). Only has off/on functions. Used on all DTS engines.

• KEY SWITCH EXTENSION - NO CRANK - 15 FT

  Guide p.539
  • 896691T1515 ft. length. This extension is used when the remote mounting a keyswitch (no crank possible), only has off/on functions. Used on all DTS engines.

IGNITION KEYS - NUMERIC

To order correct key, convert the number stamped on your key to a part number.

• REPLACEMENT IGNITION KEY

  Guide p.539
  • 30431123Key stamped with "123" Priced individually, sold @ multiples of 2
  • 30431124Key stamped with "124" Priced individually, sold @ multiples of 2
  • 30431125Key stamped with "125" Priced individually, sold @ multiples of 2
  • 30431126Key stamped with "126" Priced individually, sold @ multiples of 2
  • 30431127Key stamped with "127" Priced individually, sold @ multiples of 2
  • 30431128Key stamped with "128" Priced individually, sold @ multiples of 2
  • 30431129Key stamped with "129" Priced individually, sold @ multiples of 2
  • 30431130Key stamped with "130" Priced individually, sold @ multiples of 2
  • 30431131Key stamped with "131" Priced individually, sold @ multiples of 2
  • 30431132Key stamped with "132" Priced individually, sold @ multiples of 2
  • 30431133Key stamped with "133" Priced individually, sold @ multiples of 2
  • 30431134Key stamped with "134" Priced individually, sold @ multiples of 2

IGNITION KEYS - 4 POSITION - BASE NUMBER 893353 KEY SWITCH

To order correct key, convert the number stamped on your separate plate for part number.

• REPLACEMENT IGNITION KEY

  Guide p.539
  • 896919951Replacement for new 4 position Key switch (893353A__ series). Number is on metal plate that comes with keys- #951.
  • 896919952Replacement for new 4 position Key switch (893353A__ series). Number is on metal plate that comes with keys- #952.
  • 896919953Replacement for new 4 position Key switch (893353A__ series). Number is on metal plate that comes with keys- #953.
  • 896919954Replacement for new 4 position Key switch (893353A__ series). Number is on metal plate that comes with keys- #954.
  • 896919955Replacement for new 4 position Key switch (893353A__ series). Number is on metal plate that comes with keys- #955.
  • 896919956Replacement for new 4 position Key switch (893353A__ series). Number is on metal plate that comes with keys- #956.
  • 896919957Replacement for new 4 position Key switch (893353A__ series). Number is on metal plate that comes with keys- #957.
  • 896919958Replacement for new 4 position Key switch (893353A__ series). Number is on metal plate that comes with keys- #958.
  • 896919959Replacement for new 4 position Key switch (893353A__ series). Number is on metal plate that comes with keys- #959.
  • 896919960Replacement for new 4 position Key switch (893353A__ series). Number is on metal plate that comes with keys- #960.
  • 896919961Replacement for new 4 position Key switch (893353A__ series). Number is on metal plate that comes with keys- #961.
  • 896919962Replacement for new 4 position Key switch (893353A__ series). Number is on metal plate that comes with keys- #962.
  • 896919963Replacement for new 4 position Key switch (893353A__ series) Number is on metal plate that comes with keys- #963
  • 896919964Replacement for new 4 position Key switch (893353A__ series). Number is on metal plate that comes with keys- #964.
  • 896919965Replacement for new 4 position Key switch (893353A__ series). Number is on metal plate that comes with keys- #965.
  • 896919966Replacement for new 4 position Key switch (893353A__ series). Number is on metal plate that comes with keys- #966.
  • 896919967Replacement for new 4 position Key switch (893353A__ series). Number is on metal plate that comes with keys- #967.
  • 896919968Replacement for new 4 position Key switch (893353A__ series). Number is on metal plate that comes with keys- #968.
  • 896919969Replacement for new 4 position Key switch (893353A__ series). Number is on metal plate that comes with keys- #969.
  • 896919970Replacement for new 4 position Key switch (893353A__ series). Number is on metal plate that comes with keys- #970.

IGNITION KEYS - 3 POSITION - BASE NUMBER 897716 KEY SWITCH

To order correct key, convert the number stamped on your key to a part number.

• REPLACEMENT IGNITION KEYS

  Guide p.540
  • 87 897716451Replacement keys for 3 position 87-897716 key switch. Number is on plate that comes with original keys.
  • 87 897716457Replacement keys for 3 position 87-897716 key switch. Number is on plate that comes with original keys #457.
  • 87 897716460Replacement keys for 3 position 87-897716 key switch. Number is on plate that comes with original keys #460.
  • 87 897716461Replacement keys for 3 position 87-897716 key switch. Number is on plate that comes with original keys #461.
  • 87 897716462Replacement keys for 3 position 87-897716 key switch. Number is on plate that comes with original keys #462.
  • 87 897716463Replacement keys for 3 position 87-897716 key switch. Number is on plate that comes with original keys #463.
  • 87 897716821Replacement keys for 3 position 87-897716 key switch. Number is on plate that comes with original keys #821.
  • 87 897716827Replacement keys for 3 position 87-897716 key switch. Number is on plate that comes with original keys #827.
  • 87 897716830Replacement keys for 3 position 87-897716 key switch. Number is on plate that comes with original keys #830.
  • 87 897716831Replacement keys for 3 position 87-897716 key switch. Number is on plate that comes with original keys #831.
  • 87 897716832Replacement keys for 3 position 87-897716 key switch. Number is on plate that comes with original keys #832.
  • 87 897716833Replacement keys for 3 position 87-897716 key switch. Number is on plate that comes with original keys #833.
  • 87 897716841Replacement keys for 3 position 87-897716 key switch. Number is on plate that comes with original keys #841.
  • 87 897716847Replacement keys for 3 position 87-897716 key switch. Number is on plate that comes with original keys #847.
  • 87 897716850Replacement keys for 3 position 87-897716 key switch. Number is on plate that comes with original keys #850.
  • 87 897716851Replacement keys for 3 position 87-897716 key switch. Number is on plate that comes with original keys #851.
  • 87 897716852Replacement keys for 3 position 87-897716 key switch. Number is on plate that comes with original keys #852.
  • 87 897716853Replacement keys for 3 position 87-897716 key switch. Number is on plate that comes with original keys #853.

FORCE UNIQUE IGNITION KEYS

To order correct key, convert the number stamped on your key to a Quicksilver part number. Fits Force Ignition switches 1992 and prior.

• REPLACEMENT IGNITION KEY

  Guide p.541
  • 8177821Key stamped with "A" or not stamped with anything.
  • 8178831Key stamped with "B"
  • 8178911Key stamped with "C"
  • 8179281Key stamped with "D"
  • 8179291Key stamped with "E"
  • 819012Key stamped with "51"
  • 819013Key stamped with "55"
  • 819014Key stamped with "65"
  • 819015Key stamped with "66"
  • 819016Key stamped with "67"

IGNITION KEY COVER

• BLACK PLASTIC KEY COVER

  Guide p.542
  • 90468A1Fits most ignition switch keys.

LANYARD STOP SWITCHES

Lanyard cord attaches to the toggle switch or cap and boat driver. When switch toggles or cap pulls off switch, the ignition is interrupted and the engine shuts down.

• LANYARD STOP SWITCH

  Guide p.542
  • 87 19674A055 ft. (1.53 m) harness. Surface mount or flush mount. Used when mounting controls with no lanyard switch included. MCM/MIE engines. Do not use on DTS engines.

• LANYARD STOP SWITCH

  Guide p.542
  • 87 19674A065 ft. (1.53 m) harness. 2 inch cut out with Black bezel. Used when mounting controls with no lanyard switch included. Chrome bezel optional - order separate. MCM/MIE engines. Do not use on DTS engines.

• LANYARD STOP SWITCH

  Guide p.542
  • 87 19674A075 ft. (1.53 m) harness. Surface or Flush mount. Used when mounting controls with no lanyard switch included. Used on Outboards and DTS engines

• LANYARD STOP SWITCH

  Guide p.542
  • 87 19674A085 ft. (1.53 m) harness. 2 inch cut out with Black bezel. Used when mounting controls with no lanyard switch included. Chrome bezel optional - order separate. Used on Outboards and DTS engines

• LANYARD STOP SWITCH - DUAL FLUSH MOUNT

  Guide p.542
  • 87 814324A25 ft. (1.53 m) harness. Dual engine kit, surface mount or flush mount. Used when mounting controls with no lanyard switch included. Used on Non DTS MCM/MIE Engine - See 87-19674A12 and A13 for OB/DTS Installations

• LANYARD STOP SWITCH -DUAL FLUSH MOUNT

  Guide p.542
  • 87 19674A125 ft. (1.53 m) harness. Surface or Flush mount. Used for Dual Engine installations. Used on Outboards and DTS engines

• LANYARD STOP SWITCH - TRIPLE FLUSH MOUNT

  Guide p.543
  • 8M0139419Flush mount lanyard stop switch kit. Must order additional bezel retro fit kit 8M0182075. Triple engine applications

• LANYARD STOP SWITCH - QUAD FLUSH MOUNT

  Guide p.543
  • 8M0139420Flush Mount lanyard stop switch kit. Must order additional bezel retro fit kit 8M0182075. Quad engine applications

• LANYARD STOP SWITCH

  Guide p.543
  • 87 823037A04Fits Mercury/Mariner 2.5, 3.3, 4, 5 hp (U.S. S/N 0A809601 and above; Belgium S/N 9589154 and above) and 4/5/6 FourStroke.

• LANYARD STOP SWITCH

  Guide p.543
  • 87 856654A23-1/2 in. (89 mm) wires, does not include cap. Normally closed switch. Fits Mercury/Mariner outboards.

• LANYARD STOP SWITCH

  Guide p.543
  • 87 856654A420 ft. (6.2 m) harness. Includes 2 caps. Fits Mercury/Mariner outboards and MCM/MIE engines.

• LANYARD DIODE KIT

  Guide p.543
  • 84 898289A72This kit is dual engine adapter that is required when connecting one lanyard stop switch to two engines. Without this kit the engines would not be able to start or stop independently. Fits Mercury / Mariner outboards.

• LANYARD STOP SWITCH CAP

  Guide p.543
  • 75095T2Replacement cap for (65503A__ and 856654A__ series) Lanyard Stop Switches. Fits Mercury/Mariner outboards and MCM/MIE engines. Priced individually, sold @ multiples of 2 Mercury Precision Branded, Clamshell Package Point of Sale Packaged.
  • 75095Q2Replacement cap for (65503A__ and 856654A__ series) Lanyard Stop Switches. Fits Mercury/Mariner outboards and MCM/MIE engines. Priced individually, sold @ multiples of 2 Quicksilver Branded, Clamshell Package Point of Sale Packaged.

• LANYARD ASSEMBLY

  Guide p.543
  • 8M0164890Lanyard cord assembly kit, 54 inches. Sold in quantities of 2 pieces.

• LANYARD COUNTER DISPLAY KIT

  Guide p.544
  • 8M0092854Contains 12 Mercury Point-of-Sale packaged lanyards for counter display.

• LANYARD ASSEMBLY- 70 INCH

  Guide p.544
  • 8M0165957Lanyard cord assembly, 70 in.

• LANYARD CORD

  Guide p.544
  • 823054QFork style lanyard used with the engine mounted stop switch on the 2.5, 3.3, 4/5 HP (2-cycle), 4/5/6 (FourStroke) outboard engines. Priced individually, sold @ multiples of 2 Quicksilver Branded, Clamshell Package Point of Sale Packaged.

LANYARD SWITCHES

• LANYARD STOP SWITCH

  Guide p.544
  • 87 19674A085 ft. (1.53 m) harness. 2 inch cut out with Black bezel. Used when mounting controls with no lanyard switch included. Chrome bezel optional - order separate. Used on Outboards and DTS engines

• LANYARD STOP SWITCH -DUAL FLUSH MOUNT

  Guide p.544
  • 87 19674A125 ft. (1.53 m) harness. Surface or Flush mount. Used for Dual Engine installations. Used on Outboards and DTS engines

SHADOW RESISTOR PACKS

• RESISTOR PACK- DTS SHADOW MODE

  Guide p.544
  • 898091T01Resistor pack used with DTS Shadow Mode applications. #93 included with the harness for this versions Helm 1 and Starboard 2. Triple engine / single helm applications 2006 models and newer

• RESISTOR PACK #94 - QUAD DTS SHADOW MODE

  Guide p.544
  • 898091T02Resistor pack #94 used on Quad DTS Shadow control single helm applications. Helm 1 and Port 2. Quad engine / single helm applications 2006 models and newer

• RESISTOR PACK- DTS SHADOW MODE

  Guide p.544
  • 898091T03Resistor pack used with DTS Shadow Mode applications. #97 Helm 2 and Starboard 2. Included in lower or primary helm for dual helm installs (895816A, 895817A, 895818A, and 895819A series helms). Triple engine / dual helm applications 2006 models and newer.

• RESISTOR PACK #98 ASSEMBLY - QUAD SHADOW MODE

  Guide p.545
  • 898091T04Resistor pack #98 used with Quad DTS Shadow control dual helm applications. (#98) Helm 2, Port 2 Quad engine / dual helm applications 2006 models and newer.

JUNCTION BOXES/JUNCTION BOX ACCESSORIES

• WEATHER CAP

  Guide p.545
  • 8M0210754Weather cap for SmartCraft junction box. Provides weather protection at unused junction box connection points.

• SMARTCRAFT WEATHER CAP

  Guide p.545
  • 8M0210752Weather Cap for SmartCraft Junction Box Provides weather protection at unused junction box connection points Priced individually, sold @ multiples of 24

• 10 PIN WEATHER CAP

  Guide p.545
  • 888507T10 pin weather cap with mounting tab. Used for harnessing that could plug into a Junction Box.

• SMARTCRAFT J-BOX TERMINATOR/RESISTOR

  Guide p.545
  • 859318T1SmartCraft Yellow 10-pin Terminator/Resistor. Provides CAN Bus termination for CAN P network.

• TERMINATOR ASSEMBLY

  Guide p.545
  • 8M0055652SmartCraft Red Terminator Can 1/P & H

• RESISTOR- TERMINATION- 2 PIN

  Guide p.545
  • 893388A01Blue 2-pin terminator/resistor Provides CAN bus termination for CAN Networks.

• BLUE CAN P RESISTOR

  Guide p.545
  • 82 8M0171627New DTS v10/v12 CAN P resistor

• HELM MPR 2 PIN WEATHER CAP

  Guide p.545
  • 86 8M0054244GT280 2 pin male weather cap. Used on Joystick (Zeus, Axius and JPO) applications for the Helm MPR connection harness 8M2021476.

• PLUG ASY DIAGNOSTIC PORT

  Guide p.546
  • 8M004633910 pin diagnostic port for use on any SmartCraft application. Used as a 10 pin diagnostic port for connecting Mercury Computer Diagnostic System (CDS) junction box connection. Typically gets mounted at the helm, out of line of sight so that a technician does not have to disassemble helm to plug into a 10 pin connection. Requires a harness from back of diagnostic port to a 10 pin SmartCraft connection in the rigging.

• J-BOX Y HARNESS

  Guide p.546
  • 84 8M0165555J-box Y harness

• 5-WAY J-BOX KIT W/3 WEATHER CAPS

  Guide p.546
  • 98 8M01655575-way J-box kit with 3 weather caps.

• 5-WAY J-BOX KIT @ 24 KIT

  Guide p.546
  • 8M01752935-way Jbox kit. Priced individually, sold @ multiples of 24

• J-BOX STACKING PLUG KIT

  Guide p.546
  • 23 8M0174363J-box Stacking Plug designed for easy vertical stacking of J-Boxes, allowing all plugs to be positioned on one side.

SECURITY SYSTEMS

This section will include security devices that will help protect your engine against theft..

• 1ST MATE SAFETY & SECURITY SYSTEM - MERCURY SMARTCRAFT SINGLE ENGINE KIT

  Guide p.546
  • 98 8M6007933The new standard in marine safety and security, 1st Mate adds another layer of boating safety by notifying a boat's captain or its passengers if someone has fallen overboard. 1st Mate also serves as an effective deterrent to boat-and-engine theft. This Single Engine Kit contains these components: intelligent hub and harness, one RFID tag, and one Captain's wearables fob kit (Captain's fob and the red wristband and carabiner clip wearables). Single engine use on Mercury SmartCraft engine applicat

• 1ST MATE SAFETY & SECURITY SYSTEM - MERCURY SMARTCRAFT DUAL ENGINE KIT

  Guide p.546
  • 98 8M6007934This Dual Engine Kit contains these components: intelligent hub and harness, one RFID tag, and one Captain's wearables fob kit (Captain's fob and the red wristband and carabiner clip wearables). Dual engine use on Mercury SmartCraft engine applications. Visit www.1stMate.net to get all the latest details.

• 1ST MATE SAFETY & SECURITY SYSTEM - MERCURY SMARTCRAFT TRIPLE ENGINE KIT

  Guide p.546
  • 98 8M6007937Triple Engine Kit contains these components: intelligent hub and harness, one RFID tag, and one Captain's wearables fob kit (Captain's fob and the red wristband and carabiner clip wearables). Triple engine use on Mercury SmartCraft engine applications. Visit www.1stMate.net to get all the latest details.

• 1ST MATE SAFETY & SECURITY SYSTEM - MERCURY SMARTCRAFT 4/5/6 ENGINE KIT

  Guide p.547
  • 98 8M6007938This kit works with Mercury SmartCraft Engines (4 to 6 engines only) and includes the vessel hub, harness & captain fob, an adjustable wristband and carabiner clip. The passenger fobs and wearables are sold separately. 4/5/6 engines on Mercury SmartCraft engine applications. Visit www.1stMate.net to get all the latest details.

• 1ST MATE CAPTAIN'S WEARABLE FOB KIT

  Guide p.547
  • 98 8M60079431st Mate Safety & Security System - Captain's wearable fob kit contains the Captain's fob along with the red wristband and carabiner clip wearables for retaining the fob. For use with any 1st Mate Safety & Security System. Only 1 Captain's fob and up to 7 additional passenger fobs can be in use simultaneously. However, up to 3 Captain's fobs can be paired to a vessel.

• 1ST MATE PASSENGER'S WEARABLE FOB KIT

  Guide p.547
  • 98 8M60079441st Mate Safety & Security System - Passenger's wearable fob kit contains the Passenger's fob along with the black wristband and carabiner clip wearables for retaining the fob. For use with any 1st Mate Safety & Security System. Up to 7 additional passenger fobs can be in use simultaneously on one vessel.

• CONTROL MODULE THEFT - MERCURY TDS

  Guide p.547
  • 8M0056987Control Module that communicates information as part of the Mercury TDS (Theft Deterrent System) Service replacement part Used in kit 8M0057383 See Kit for applications

• FOB -MERCURY TDS (THEFT DETERRENT SYSTEM)

  Guide p.547
  • 8M0056988Fob replacement kit to activateTheft Deterrent System as part of the Mercury TDS (Theft Deterrent System) Service replacement part Used in kit 8M0057383 See Kit for applications

• DOCKING STATION - THEFT - MERCURY TDS

  Guide p.547
  • 8M0056994Docking station that communicates information as part of the Mercury TDS (Theft Deterrent System) Service replacement part Used in kit 8M0057383 See Kit for applications

• WIRING HARNESS - THEFT - MERCURY TDS

  Guide p.547
  • 84 8M0056993Service replacement part. Main harness that connects docking station and module as part of the Mercury TDS (Theft Deterrent System) Used in kit 8M0057383 See Kit for applications

• BEZEL

  Guide p.547
  • 8M6002359Chrome - 52 mm Fits small 2-1/8 in.(52 mm) O.D. SC100 System Link gauges Priced individually, sold @ multiples of 2

• IRIDIUM SATELLITE ANTENNA

  Guide p.548
  • 8M0059430Iridium Satellite antenna used in the Mercury TDS - Premium security system. Mercury TDS - Premium Kits

• POWER HARNESS

  Guide p.548
  • 84 8M0059434Power cord used in the Mercury TDS - Premium security system. Mercury TDS - Premium Kits

• OUTBOARD NUT LOCK TRANSOM - SCM CERTIFIED

  Guide p.548
  • 11 8M0162394SCM certified High Strength Outboard Motor Lock for added security that fits most turnbuckle design bolts. This kit features anti drill protection from the hardened case, polished Marine Grade steel, noise dampening to reduce rattle and 2 security keys that can not be duplicated. For outboards that use the turnbuckle (thumb screw) mounting bolts.

• OUTBOARD TURNBUCKLE LOCK - SCM CERTIFIED

  Guide p.548
  • 8M0162395SCM+VbV certified High Strength Outboard Motor Lock for added security and protection for your Outboard. Features 2 security keys that can not be duplicated, Anti-Drill hardened Marine Grade Steel to make it harder to saw or drill through, and will fit up to 1/2 inch (12 MM) engine bolts. For outboards that use transom mounted bolts

• OUTBOARD MOTOR LOCK - BASIC

  Guide p.548
  • 67 8M0054123Outboard Motor Lock for added security and protection for your Outboard. Features heavy carbon steel design, recessed solid brass lock and noise dampening to reduce rattle. Good security protection at a good value. Outboards that use turnbuckle (thumb screw) mounting bolts

• OUTBOARD MOTOR LOCK - HIGH SECURITY

  Guide p.548
  • 67 8M0054122High Strength Outboard Motor Lock for added security that fits most turnbuckle design bolts. This kit features anti-drill protection from the hardened case, polished 316 stainless steel, noise dampening to reduce rattle and 2 security keys that can not be duplicated. Outboards that use the turnbuckle (thumb screw) mounting bolts.

• OUTBOARD MOTOR LOCK - TRANSOM

  Guide p.548
  • 67 8M0054121High Strength Outboard Motor Lock for added security and protection for your Outboard. Features 2 security keys that can not be duplicated, anti-drill hardened material to make it harder to saw or drill thru and will fit up to 1/2 inch (12 MM) engine bolts. Outboards that use transom mounted bolts

• OUTBOARD MOTOR LOCK

  Guide p.548
  • 67 8M0126685SSF certified High Strength Outboard Motor Lock for added security that fits most turnbuckle design bolts. This kit features anti drill protection from the hardened case, polished Marine Grade steel, noise dampening to reduce rattle and 2 security keys that can not be duplicated. For outboards that use the turnbuckle (thumb screw) mounting bolts.

• OUTBOARD MOTOR LOCK

  Guide p.549
  • 67 8M0126686SSF certified High Strength Outboard Motor Lock for added security and protection for your Outboard. Features 2 security keys that can not be duplicated, Anti-Drill hardened Marine Grade Steel to make it harder to saw or drill thru and will fit up to 1/2 inch (12 MM) engine bolts. For outboards that use transom mounted bolts

• OUTBOARD MOTOR LOCK

  Guide p.549
  • 67 8M0217518Outboard Transom spindle lock: SCM+CCV certified High Strength Outboard Motor Lock for added security and protection for your Outboard. Features 2 security keys that can not be duplicated, Anti-Drill hardened Marine Grade Steel to make it harder to drill through, anti-saw function. Fits: Mercury® Avator™ 7.5e to 35e electric outboards, Mercury and Mariner® 2.5-6hp FourStroke outboards, Yamaha®, Suzuki®, Honda® and Tohatsu® 2.3-6hp 4-stroke outboards.

SAFETY SYSTEMS

• WARNING HORN KIT

  Guide p.549
  • 816492A9Kit includes the new style piezo horn used with 1986 and newer remote controls and wiring harnesses. Fits 2000 and newer Mercury/Mariner V-6 outboards. Also fits MY2002 and newer 525-1200 Hp. Race Sterndrives.

• LIGHT - DASH MOUNTED - CATALYST MALFUNCTION

  Guide p.549
  • 8M0046481Light will go on indicating that a malfunction has occurred with your catalyst on your engine. This means you will need to get your engine serviced soon. Works similar to your check Engine light in your truck or car (harness to be sold separately). Harness numbers for single helms: (8M0048049, 8M0048054, 8M0048055, 8M0048056, 8M0048057, 8M0048058, 8M0048059). MerCruiser products that are equipped with a catalyst.

• HARNESS - MALFUNCTION LIGHT

  Guide p.549
  • 84 8M004804910 ft. harness to connect the OBDM malfunction light for single helm applications. All Mercruiser engines that have a catalyst
  • 84 8M004805415 ft. harness to connect the OBDM malfunction light for single helm applications. All Mercruiser engines that have a catalyst
  • 84 8M004805520 ft. harness to connect the OBDM malfunction light for single helm applications. All Mercruiser engines that have a catalyst
  • 84 8M004805625 ft. harness to connect the OBDM malfunction light for single helm applications. All Mercruiser engines that have a catalyst
  • 84 8M004805730 ft. harness to connect the OBDM malfunction light for single helm applications. All Mercruiser engines that have a catalyst
  • 84 8M004805840 ft. harness to connect the OBDM malfunction light for single helm applications. All Mercruiser engines that have a catalyst

• DUAL HELM HARNESS - MALFUNCTION LIGHT

  Guide p.549
  • 84 8M004804010 ft. harness to connect the OBDM malfunction light for dual helm applications. All Mercruiser engines that have a catalyst

• NON SMARTCRAFT MOVING PROP ALERT LIGHT SYSTEM - OVAL

  Guide p.550
  • 8M0109508Moving Prop (MP Alert) Alert Light system is a highly visible light system that provides additional notice to swimmers when the engine is running and the propeller is in motion. This kit is a two light kit that includes 2 smart lights with 6 LED lights, a control module (connected to the engine computer) and a 20 ft wiring harness (other lengths available). Also included is hardware needed to mount the lights. Additonal lights can be purchased to add to the system. (Oval Shape) Analog Engine / N

• MOVING PROP ALERT LIGHT SYSTEM - OVAL

  Guide p.550
  • 8M0109507Moving Prop (MP Alert) Alert Light system is a highly visible light system that provides additional notice to swimmers when the engine is running and the propeller is in motion. This kit is a two light kit that includes the smart lights with 6 LED lights each, a control module (connected to the engine computer) and a 20 ft. wiring harness (other lengths available). Also included is hardware needed to mount the light. Additional lights can be purchased to add to the system (Oval Shape). Works wit

• MP ALERT - ADD A LIGHT

  Guide p.550
  • 8M0109505This kit will allow you to add additional lights to the MP Alert kits. Each kit includes one light and a Y harness to allow you to easily add a third or forth light on the boat (Oval Shape). Works with all SmartCraft compatible engines.

• MP ALERT LIGHT

  Guide p.550
  • 8M0109506Service replacement light for the MP alert kit (Oval Shape).

• MP ALERT - OVAL STAINLESS BEZEL

  Guide p.550
  • 8M0072341Stainless bezel to be used for any oval MP Alert light Can be used on any of the new cowl-mounted oval MP Alert options for the 3.4L V6/4.6L V8 Fourstrokes

• MP ALERT - OVAL WARM FUSION BEZEL

  Guide p.550
  • 8M0138978Warm Fusion bezel to be used for any oval MP Alert light Should be used on warm fusion cowl-mounted oval MP Alert options for the 3.4L V6/4.6L V8 Fourstrokes

• MP ALERT MODULE

  Guide p.550
  • 8M0117114Module used to control the lights on MP Alert. Controller is used with MP Alert light system on SmartCraft applications. Also can turn on/off with SkyHook feature on Joystick applications.

• MP ALERT COWL KIT

  Guide p.550
  • 8M0131810Moving Prop (MP) Alert cowl kit

• MP ALERT - Y HARNESS

  Guide p.551
  • 84 8M0053250Y Harness for MP Alert to allow easy installation of third or forth light on the boat. Works with any SmartCraft compatible engine.

• HARNESS EXTENSION MP ALERT

  Guide p.551
  • 84 8M0054183Harness for connecting MP Alert light to front of boat - 10 ft
  • 84 8M0054185Harness for connecting MP Alert light to front of boat - 20 ft
  • 84 8M0054186Harness for connecting MP Alert light to front of boat - 30 ft
  • 84 8M0054187Harness for connecting MP Alert light to front of boat - 50 ft

TACHOMETER HARNESSES

• TACHOMETER HARNESS

  Guide p.551
  • 84 69108A5Four pin style. Used with 84-87364A__ series harnesses, 65640A__ series controls and 76334A__ series controls.

• TACHOMETER HARNESS

  Guide p.551
  • 84 86396A8Five pin style. 4 ft. (1.2 m). Used with Commander, Commander 2000 series & MSC 4000 (8 pin) series side mount controls and Ignition/Choke assemblies.
  • 84 86396A24Five pin style. 13 ft.(4 m). Used with Commander, Commander 2000 series & MSC 4000 series side mount controls and Ignition/Choke assemblies.

REMOTE CONTROL ADAPTER HARNESSES

• REMOTE CONTROL ADAPTER HARNESS

  Guide p.551
  • 84 892473A01Converts the traditional Mercury connector to an amp 8-pin connector. Converts side mount controls 881170A 3, 15, 16 and the 816626A_ series ignition keyswitch harness to connect to the MY2005 and newer 8/9.9 hp. FourStroke outboard. MY2005 and newer 8/9.9 hp. FourStroke outboard and the 15/20 hp. FourStroke (351cc) outboard when a 8 pin side mount control or keyswitch harness is used.

REMOTE CONTROL/IGNITION CHOKE EXTENSION HARNESSES

Fits Mercury / Mariner 6 HP and Higher (2 cycle, USA & BEL Origin) outboards, Mariner 30/40 HP with oil injection (2 cycle, Japanese Origin), all Mercury / Mariner 4-Stroke (USA Origin) outboards and Force 40 HP and Higher (1993 and Newer). Various applications include 7, 8, and 10 pin harnesses and 12 wire (8 pin plus 4 bullet connectors) used on side mount controls and ignition/choke assemblies.

• EXTENSION HARNESS

  Guide p.551
  • 84 17829A22 ft. (0.6 m) harness, 8 lead harness. Used as harness extension or to complete two station installations.
  • 84 17829A1010 ft. (3.05 m) harness, 8 lead harness.
  • 84 17829A2020 ft. (6.1 m) harness, 8 lead harness. Used as harness extension or to complete two station installations.

TWO STATION Y-HARNESSES

For boats with two station applications.

• TWO STATION "Y" HARNESS

  Guide p.552
  • 84 91942A4Used with Instrument Harness (84-812475A3 or 84-812476A 3), Instrument Extension Harness (84-812441A__ series or 84-812835A__ series) and Ignition Switch (54212A 7). Includes two station sending units. Fits 1986 and newer MCM/MIE gasoline engines and 1994 and newer MCM/MIE diesel engines (except D-Tronic D2.8L,D4.2L and D7.3L diesels).

DUAL STATION SENDERS

Replaces factory installed sender on engine. For use with dual station instrumentation.

• ENGINE OIL PRESSURE SENDER

  Guide p.552
  • 37293TFits MCM/MIE gasoline engines

TWO STATION START/STOP PANELS

Mounts in a 3-3/8 inch (86 mm) hole.

• TWO STATION START/STOP PANEL

  Guide p.552
  • 8M00788923 ft. (910 mm) harness connects in place of ignition switch. Used on Outboard installations that have Mechanical Non DTS requirements for Remote Start/Stop. Uses 6 Pin connection and services second station installations.

TRIM SWITCHES

• FLUSH MOUNT TRIM PAD SINGLE

  Guide p.552
  • 87 879303A01

• TRIM PAD - DTS DUAL ENGINES

  Guide p.552
  • 87 879303A02Low profile mount trim pad for dual engine applications Gen1 (2007 and newer) DTS Dual engines

• TRIM PAD - DTS TRIPLE ENGINES

  Guide p.552
  • 87 879303A03Low profile mount trim pad for triple engine applications. Gen I (2007 and newer) DTS triple engines

• TRIM PAD - DTS QUAD ENGINES

  Guide p.552
  • 87 879303A04Low profile mount trim pad for quad engine applications Gen I (2007 and newer) DTS Quad engines

• BEZEL

  Guide p.553
  • 879315T07Black Trim switch, triple/quad.

• AUXILIARY TRIM HARNESS

  Guide p.553
  • 84 895388T02Allows connection of trim wires for use of a helm trim lever or secondary trim device. 2004 and newer DTS engines with panel mount remote control

• HARNESS-FUSED BOW TRIM

  Guide p.553
  • 84 8M0169503Fuse adapter only. V6/V8 DTS engine must have L6SC fuse

• BOW TRIM HARNESS

  Guide p.553
  • 84 8M0169506Allows connection of trim wires for use of a bow mounted trim button. Harness runs from bow trim switch to engine cowl trim switch. 2004 and newer DTS engines

• HARNESS-AUXILIARY DASH SWITCH- DUALS

  Guide p.553
  • 84 866704T01This harness allows the connection to a auxiliary trim switch. Mounts between the 8 pin trim connector and the command module harness. No diode trim all. DTS engines

• TRIM ALL ADAPTER HARNESS

  Guide p.553
  • 84 8M0094269Harness allows for use of "trim all" switch on dual console ERCs when retrofitting with previous generation helm harnessing. Can also be used for SF2 dual ZE LCM between pad and handle. Should only be used in a repower situation where "trim all" handle switch in dual ERC does not match up with existing DTS helm harnessing

• TRIM ALL - HARNESS ADAPTER

  Guide p.553
  • 84 8M0163379Trim all harness adapter

• 4 POSITION TRIM SWITCH ADAPTER

  Guide p.553
  • 84 896394T01Used with all dash mounted triple and quad trim switches to adapt to Zero Effort Controls. Triple/Quad engines. 2006 / 2007 (Gen II) DTS engines

• TRIM ADAPTER - PADDLE / BLINKER TRIM - ZE

  Guide p.554
  • 84 8M0163378Paddle trim harness adapter

• TRIM ADAPTER - PADDLE / BLINKER TRIM - STD

  Guide p.554
  • 84 8M0165559Standard paddle/blinker trim adapter

• TRIM ADAPTER (8-PIN TO 3-PIN)

  Guide p.554
  • 84 8M0163380Trim adapter harness, 8-pin to 3-pin

• TRIPLE ENGINE TRIM HARNESS KIT-DTS

  Guide p.554
  • 84 895744A02Allows connection of multiple DTS engines to trim switches (triple engine with Zero Effort Controls-included in kit).

• QUAD ENGINE TRIM HARNESS KIT-DTS

  Guide p.554
  • 84 895744A04Allows connection of multiple DTS engines to trim switches (Quad engines with Zero Effort Controls-included in kit).

• ZERO EFFORT TRIM ADAPTER HARNESS

  Guide p.554
  • 84 8M0109408Included in Race Rigging Kits. Required for any newer style Zero Effort control with 8 pin Trim All connector. Harness is 8 pin Zero Effort to bullet connectors

• DUAL ENGINE ZERO EFFORT 8 PIN TRIM ALL HARNESS

  Guide p.554
  • 84 8M0047784Harness that provides individual bullet drops for rocker switches from the 8 pin Trim All connector on the newer Zero Effort remote controls. Individual dash trim rockers with dash trim all Connects a dual engine Zero Effort control with the newer 8 pin Trim All connector to individual rocker switches via bullets

• HARNESS EXTENSION- QUAD

  Guide p.554
  • 84 8M015812748" extension with dash, ERC pad, and Y harness.

TRIM LIMIT KITS

Trim limit kits available to adjust trim up limits.

• TRIM LIMIT SWITCH KIT

  Guide p.554
  • 899625K08Limits the up travel of the power trim to minimize potential interferences when fully tilted. Fits the Mercury/Mariner 40-60 4 Stroke outboard

• TRIM ANALOG TO DIGITAL AND LIMIT KIT

  Guide p.555
  • 8M0118725This kit allows the conversion of the trim signal from the analog sender to a digital output for SmartCraft gauge applications. The kit also has an additional feature that allows the max tilt up position to be set to avoid interference when tilting the engine completely up. 2.1L F75-115 Four Stroke

• TRIM LIMIT SWITCH KIT

  Guide p.555
  • 8M0059532Limits the up travel of the power trim to minimize potential interferences when fully tilted. This is a digital device. Fits the 150 HP 4 Stroke only

TRANSOM MOUNTED POWER TILT PANEL

• TRANSOM MOUNTED POWER TILT PANEL

  Guide p.555
  • 87 815200A1Rocker switch style with 6 ft. (1.8 m) harness and bullet connectors. Provides tilt control from the outside of the boat when trailering and launching. "T" harness (included in kit) connects directly to trim pump with traditional 3 blade connector. Fits MCM models with power trim having the traditional 3 blade connector.

• TRANSOM MOUNTED POWER TILT PANEL

  Guide p.555
  • 87 815200A02Rocker switch style with 6 ft. (1.8 m) harness and bullet connectors. Provides tilt control from the outside of the boat when trailering and launching. "T" harness (included in kit) connects directly to trim pump with 3 pin Packard connector. Fits MCM models with newer power trim having the 3 pin Packard connector.

OUTBOARD POWER TRIM SWITCH KITS

• POWER TRIM SWITCH KIT

  Guide p.555
  • 87 14645A4Toggle switch style. Tiller handle mounted. Fits Mercury/Mariner 40 JET and 50/60 HP outboards and operates the power trim kit added to a base ELHO model engine. See Tiller application chart for specific engine models.

• POWER TRIM SWITCH KIT

  Guide p.555
  • 87 18286A17Rocker switch style with 10 ft. (3.05 m) harness and 3 blade connector. Installation requires power trim "Y" harness (58366A 2). Provides tilt control from the bow or transom location. Fits Mercury/Mariner models equipped with remote mounted trim pump.

• POWER TRIM SWITCH KIT

  Guide p.555
  • 87 18286A18Rocker style switch with 10 ft. harness and bullet connectors. Can be surface mounted or flush mounted. Provides tilt control from the bow or transom location. Fits Mercury/Mariner models equipped with integral trim pump.

• POWER TRIM SWITCH KIT

  Guide p.556
  • 87 18286A46Rocker switch style with 25 ft. (7.62 m) harness and bullet connectors. Can be surface mounted or flush mounted. Provides tilt control from the bow or transom location. Fits Mercury/Mariner 75-115 hp. FourStroke outboards beginning with serial number 1B366823-2B094955.

• POWER TRIM SWITCH KIT

  Guide p.556
  • 87 18286A19Rocker switch style with 25 ft.(7.62 m) harness and bullet connectors. Can be surface mounted or flush mounted. Provides tilt control from the bow or transom location. Fits Mercury/Mariner models equipped with integral trim pump.

• POWER TRIM SWITCH KIT

  Guide p.556
  • 87 18286A47Rocker switch style with 10 ft. (3.0 m) harness and bullet connectors. Can be surface mounted or flush mounted. Provides tilt control from the bow or transom location. Fits Mercury/Mariner 75-115 hp. FourStroke outboards beginning with serial number 1B366823-2B094955.

• TRIM LIMIT SWITCH KIT

  Guide p.556
  • 87 814407A3Kit includes a mercury switch to limit power trim travel and a new, shorter tilt bracket. Fits all Mercury/Mariner V-6 outboard applications which use engine mounted power trim solenoids.

• TRIM SWITCH Y-HARNESS

  Guide p.556
  • 84 889295TAllows for tee-in of bow power trim switch with remote controls. Fits the F75-90-115 hp. FourStroke outboard, 1B366823 and above.

TROLL CONTROL

• TROLL CONTROL- DASH MOUNTED- J BOX SMARTCRAFT INSTALLATIONS

  Guide p.556
  • 87 8M0083438Troll Control will allow you to have the same functions that you get from the SmartCraft Digital gauges and adjust the speed of the boat. By pushing the button up or down, you can feather your speed every 10 RPM. Go from idle to 1000 RPM or anywhere in between (some engines can actually go lower than idle (75-115 4 stroke(Walleye), 135-200 HP Verado 4 cylinder and 3.0L Optimax). RPM will reset to idle when more than 2-3% movement occurs at the throttle (TPS). Includes Troll Control button pad. F

• TROLL CONTROL WITH Y HARNESS- DASH MOUNTED- ANALOG

  Guide p.556
  • 87 8M0083439Troll Control will allow you to have the same functions that you get from the SmartCraft digital gauges and adjust the speed of the boat. By pushing the button up or down, you can feather your speed every 10 RPM. Go from idle to 1000 RPM or anywhere in between (some engines can actually go lower than idle (75-115 4 stroke (Walleye), 135-200 HP Verado 4 cylinder and 3.0L Optimax). This kit will be used in analog gauge installations. RPM will reset to idle when more than 2-3% movement occurs at th

• TROLL CONTROL Y HARNESS

  Guide p.556
  • 84 8M0042976Y harness allows you to connect directly to main engine harness and the Troll Control kit without using a "J" box. Mechanical 14pin CANP breakout harness only. Not compatible with Next Gen DTS or any other CANH system. Used with Troll Control Kit 879365K08 (879365A08).

• TROLL CONTROL KIT

  Guide p.557
  • 87 8M0083437RPM adjustment at your finger tips. This kit can be added to the Big Tiller Mechanical without P/S as an option. Y Harness not included. Mechanical use only. Not compatible with DTS applications.

POWER TRIM EXTENSION HARNESSES

Plugs into remote control or trim panel with 3 blade connectors.

• POWER TRIM EXTENSION HARNESS

  Guide p.557
  • 46838A410 ft.(3.05 m) harness and 3 blade connectors. Fits Mercury/Mariner and MCM models with power trim.
  • 46838A620 ft.(6.1 m) harness and 3 blade connectors. Note: Use with dual solenoid trim pump only. Fits Mercury/Mariner and MCM models with power trim.

• POWER TRIM EXTENSION HARNESS

  Guide p.557
  • 84 881125A124 ft. (4.88 m) harness. This harness connects the remote control 4 pin Molex connector to the traditional 3 blade Mercury pump trim pump connector. MCM/MIE

• POWER TRIM EXTENSION HARNESS

  Guide p.557
  • 84 865772T0116 ft.(4.88 m) harness. This harness connects the remote control 4 pin Molex connector to the newer design 3 pin Packard pump trim pump connector. MCM/MIE

• HARNESS CONTROL PUMP ASSEMBLY

  Guide p.557
  • 84 865772T0224 ft. (4.88 m) harness control pump assembly. This harness connects the remote control 4 pin Molex connector to the newer design 3 pin Packard pump trim pump connector. MCM/MIE

POWER TRIM EXTENSION HOSE/HARNESS KIT

• POWER TRIM EXTENSION HOSE/HARNESS KIT

  Guide p.557
  • 32 865384A01Includes a 6 ft (1.8m) harness and 4 ft (1.2m) hoses Fits 1983 and newer MCM models

POWER TRIM ADAPTER HARNESSES

• POWER TRIM ADAPTER HARNESS

  Guide p.558
  • 84 865770A0212 in.(305 mm) harness. To convert older P/T pump with 3 blade connector to newer remote control harness with 3 pin Packard connector.

• POWER TRIM ADAPTER HARNESS

  Guide p.558
  • 84 865771A0212 in.(305 mm) harness. To convert newer P/T pump with 3 pin Packard connector to older remote control harness with 3 blade connector.

POWER TRIM POWER SUPPLY CABLE

Recommend by the ABYC for use with MerCruiser power trim pumps installed in boats with batteries (or battery banks) rated more than 800 CCA or with a battery switch.

• POWER TRIM CABLE ASSEMBLY

  Guide p.558
  • 84 889282A01102 cm (48 inches), sheathed without fuse.

• POWER TRIM CABLE ASSEMBLY

  Guide p.558
  • 84 889282A02183 cm (72 inches), fused and sheathed.

BATTERY BAR - MULTIPLE CONNECTOR

• BATTERY MULTIPLE CONDUCTOR KIT (WITH COVERS)

  Guide p.558
  • 898289Q45New Battery Bus Bar Kit allows multiple connection points that result in clean and direct connections for various electrical power needs. This will eliminate stacking of ring terminals and reduce corrosion and loose connections resulting in poor or faulty electrical connections. Kit includes a 3/8 inch and a 5/16 inch mounting plate made of brass with all the fasteners needed for multiple connections. This kit also includes a positive (red) and negative (black) cover that snaps to the plate and

• BATTERY MULTIPLE CONDUCTOR KIT (NO COVERS)

  Guide p.558
  • 898289T47New Battery Bus Bar Kit allows multiple connection points that result in clean and direct connections for various electrical power needs. This will eliminate stacking of ring terminals and reduce corrosion and loose connections resulting in poor or faulty electrical connections. Kit includes a 3/8 inch and a 5/16 inch mounting plate made of brass with all the fasteners needed for multiple connections. This kit does not include plastic snap on covers (ABYC compliant). Any 12 Volt battery with 3/8

• BATTERY COVER - RED/POSITIVE

  Guide p.559
  • 898289045Positive (Red) snap on cover used with battery bus bar kits. Any 12 volt battery that uses the new Bus Bar Kit

• BATTERY COVER - BLACK/NEGATIVE

  Guide p.559
  • 898289046Negative (Black) snap on cover used with battery bus bar kits. Any 12 volt battery that uses the new Bus Bar Kit

• BATTERY PLATE - 3/8 INCH (WITH FASTENERS)

  Guide p.559
  • 898289A71Multiple conductor battery plate 3/8 inch (with fasteners). Clean up your battery solutions with direct isolated connections.

• BATTERY PLATE - 5/16 INCH (WITH FASTENERS)

  Guide p.559
  • 898289A48Multiple conductor battery plate with fasteners (no covers). Clean up your battery solutions with direct isolated connections.

BATTERY ISOLATORS

Multi-battery drain occurs when there are two or more batteries in a charging system. Without a battery isolator, accessories attached to one battery will draw power from all other batteries in the circuit, leaving them seriously rundown, or even dead. The Quicksilver Battery Isolator is an electric current controlling device which isolates each battery in the circuit. Each battery then discharges and charges accordingly. Never does the load on one battery drain power from other batteries in the system.

• BATTERY ISOLATOR - 80 AMP

  Guide p.559
  • 87 8M600558380 amp battery isolator. Ensure battery cables meet ABYC/CFR regulations. All MerCruiser and Outboard engines.

• BATTERY ISOLATOR - 200 AMP

  Guide p.559
  • 87 8M6005584200 amp battery isolator. Ensure battery cables meet ABYC/CFR regulations. All MerCruiser and Outboard engines.

• BATTERY ISOLATOR HARNESS KIT

  Guide p.559
  • 84 8M0094239Allows the connection of any battery isolator to Mercury/Mariner outboard. Kit includes a 10 gauge red cable (8 ft.[2.44 m] length) that connects from the regulator output terminal to the battery isolator input terminal. Fits Mercury/Mariner 50-125 hp. (2000 & prior) with high output (16 amp.) alternator and V-6 models (1999 & prior) equipped with 40 amp. alternator or dual 20-amp alternator systems and fits the F75-115 hp. (2.1L) FourStroke and the F150 EFI FourStroke outboard. Connections from

• BATTERY ISOLATOR STARTER CABLE

  Guide p.560
  • 84 8M0045743Required in addition to the standard Battery Isolator Harness Kit. Only required with the F75-115 FourStroke outboard 1B366823-2B094995.

• ELECTRICAL ISOLATOR KIT- DUAL OPTI AND 150 FOURSTROKE

  Guide p.560
  • 8M0134605Used to add Power steering option to Dual OptiMax or 150 FourStroke engines. Dual OptiMax or 150 FourStroke Engines

HARDWARE

• ELECTRICAL HARDWARE KIT

  Guide p.560
  • 86 813937A2Contains a broad selection of the electrical connectors used on Mercury/Mariner/ Force and MerCruiser products.

• BULLET TERMINAL RECEPTACLE

  Guide p.560
  • 86 813936T.18 in. (5 mm) diameter. Priced & packaged in qty. of 20

• BULLET TERMINAL RECEPTACLE

  Guide p.560
  • 86 87223T.156 in. (4 mm) diameter, two wire. Priced & packaged in qty. of 20

• BULLET TERMINAL RECEPTACLE

  Guide p.560
  • 86 814433T.156 in. (4 mm) diameter. Priced & packaged in qty. of 20

• BULLET TERMINAL

  Guide p.560
  • 86 814434T.156 in. (4 mm) diameter. Priced & packaged in qty. of 20

• BULLET TERMINAL

  Guide p.560
  • 86 813937T.18 in. (5 mm) diameter. Priced & packaged in qty. of 20

• RING TERMINAL

  Guide p.561
  • 86 60878T#10 Priced & packaged in qty. of 20

• RING TERMINAL

  Guide p.561
  • 86 98199T#10 Self Locking Priced & packaged in qty. of 20

• RING TERMINAL

  Guide p.561
  • 86 60602T.25 in. (6 mm) diameter. Priced & packaged in qty. of 20

• BULLET TERMINAL RECEPTACLE INSULATOR

  Guide p.561
  • 85 8M0214913.156 in. (4 mm) diameter. Priced individually, sold @ multiples of 20

• INSULATOR FEMALE BULLET

  Guide p.561
  • 85 8M0214914.156 in. (4 mm) diameter, one wire. Priced individually, sold @ multiples of 20

• CABLE BOOT

  Guide p.561
  • 85 8M0204731Insulator cable boot, red.

• HEAT SHRINK TUBING

  Guide p.561
  • 5790811.25 in. (6 mm) diameter x 10 inches long. Heat Shrink Tubing.

• SPLICE CLIP KIT

  Guide p.562
  • 86 60831TSplice clip Priced & packaged in qty. of 20 Priced & packaged in qty. of 20

• CRIMPING TOOL

  Guide p.562
  • 91 808696Crimps the electrical connector to the wire.

QUICKSILVER FUNNEL ENTRY VINYL TERMINALS

• FEMALE TAB DISCONNECT

  Guide p.562
  • 67 85176616-14 gauge, .250 in. Priced & packaged in qty. of 25

• MALE NYLON COUPLER

  Guide p.562
  • 67 851773.250 inch, 16-14 gauge. Priced & packaged in qty. of 50

CABLE TIES

• TIE STRAP

  Guide p.562
  • 8M02149405-1/2 inches (140 mm) long, 0.14 inches wide, black color, 1/16 inch to 1-1/4 inch (1.6-32 mm) bundle diameter. Priced individually, sold @ multiples of 100

• CABLE TIE

  Guide p.562
  • 54 816311T8 inches (203 mm) long, 0.18 inches wide, black color, 3/8 inch to 1-3/4 inch (9.5-44 mm) bundle diameter, 60 lbs. (27 kg) minimum loop tensile strength. Priced individually, sold @ multiples of 100

• CLIP

  Guide p.562
  • 54 8991458"x 0.2" tie with push-in 0.25"-0.27" hole.

• STANDARD CABLE TIE

  Guide p.562
  • 54 8M0064023Standard 11 inch (280 mm) long, 0.177 inches wide, black color, 1/16 inch -3 inches (1.6-76 mm) bundle diameter, 50 lbs. (23 kg) minimum loop tensile strength, 1000 pieces/bag. Priced individually, sold @ multiples of 100

• CABLE TIE

  Guide p.563
  • 54 8M0064024Nylon. White, 5.62" x 0.10" (T18I9C2) or Black, 6.1" x 0.10" (62-N011). Sold in quantities of 100

• ANCHOR

  Guide p.563
  • 822434Anchor - Cable Tie @each (Dennison #10028) 0.75" long hole 0.200 (up to #10 screw). Cable ties up to 0.190" wide x 0.08" thick.

TOOLS

• 14 PIN DEPINNING TOOL

  Guide p.563
  • 91 896352A01Used to remove pins on 14 pin DTS and non-DTS harnesses.

• DATA CABLE PULLER

  Guide p.563
  • 888462A1Attaches to end of data harness to aid in pulling harness through boat. Prevents damage to data harness.

• 14 PIN MALE WEATHER CAP

  Guide p.563
  • 8M0126959Heavy Duty 14 pin Male Weather Cap. Reusable weather cap used to protect the integrity of the 14 pin data cable when connections are not able to be immediately made.

• 14 PIN FEMALE WEATHER CAP

  Guide p.563
  • 8M0126960Heavy Duty 14 pin Female Weather Cap. Reusable weather cap used to protect the integrity of the 14 pin data cable when connections are not able to be immediately made.