Accessory Guide

ACTIVE TRIM KITS

The Active Trim Kit includes Active Trim pad, ECU, and harness. Ensure correct kit is ordered as Active Trim part numbers are specific to engine families. Additional parts may be required dependent on boat rigging.

• ACTIVE TRIM - DTS

  Guide p.497
  • 8M0111544This kit is for one through four engine installations of Digital Throttle & Shift or Joystick Piloting System Outboards and MerCruiser sterndrives. Single - Quad Engine Verado 200-400HP and Single & Dual Engine DTS/JPS MerCruiser Sterndrive

• ACTIVE TRIM - MECHANICAL MERCRUISER - SINGLE ENGINE

  Guide p.497
  • 8M0111550This kit is for the single engine installation of current 4.5L and 6.2L MerCruiser Sterndrives only.

• ACTIVE TRIM - MECHANICAL MERCRUISER - DUAL ENGINE

  Guide p.497
  • 8M0111554This kit is compatible with Dual Engine Mechanical Sterndrives 4.5L and 6.2L 300 & 350HP only

• ACTIVE TRIM - 3.4L V6 AND 4.6L V8, 150HP FOURSTROKE, OPTIMAX 150-250HP - SINGLE ENGINE

  Guide p.498
  • 8M0111545This kit is for single engine installations of 150hp Mercury 4-stroke or 150 through 250hp Mercury OptiMax outboards. Single Engine 3.4L V6 175-225hp, 4.6L V8 200-300hp, 150HP FourStroke, Optimax 150-250hp

• ACTIVE TRIM - 3.4L V6, 4.6L V8, 150HP FOURSTROKE, OPTIMAX 150-250HP - DUAL ENGINE

  Guide p.498
  • 8M0111552This kit is for Dual Engine applications 3.4L V6, 4.6L V8, 150HP FourStroke and Optimax 150-250hp

• ACTIVE TRIM - 75-115HP FOURSTROKE - SINGLE ENGINE

  Guide p.498
  • 8M0111546This kit is for the single engine installation of 75-115hp Mercury 4-stroke outboards (SN 2B095049 and up)

• ACTIVE TRIM - 75-115HP FOURSTROKE - DUAL ENGINE

  Guide p.498
  • 8M0111553This kit is compatible with Dual Engine 75-115HP FourStroke applications (SN 2B095049 and up)

• ACTIVE TRIM - 40-60HP FOURSTROKE - SINGLE ENGINE

  Guide p.498
  • 8M0111547This kit is for the single engine installation of 40 through 60hp Mercury 4-stroke outboards. Single Engine Gen 5 40-60HP FourStroke (SN 1C453940 and up)

• PERFORMANCE ACTIVE TRIM

  Guide p.498
  • 8M0113442This kit is for greater than 70 mph Single-Quad engine Verado 200-400HP and Single-Dual engine 500+HP DTS high performance sterndrives Greater than 70 mph Single - Quad Engine Verado 200-400HP and Single - Dual Engine 500+HP DTS High Performance Sterndrives

• ACTIVE TRIM - DTS (WITHOUT TRIM PAD)

  Guide p.498
  • 8M0129437The function of the Active Trim is controlled on the screen of your Mercury VesselView 403, 502,703 or 903. It is compatible with a Lowrance or Simrad displays using the VesselView Link. This kit is for one through four engine installations of Digital Throttle & Shift or Joystick Piloting System Outboards and MerCruiser sterndrives using the Mercury VesselView System. Single - Quad Engine Verado 200-400HP and Single & Dual Engine DTS/JPS MerCruiser Sterndrive and using a VesselView 502 or 702 an

• PERFORMANCE ACTIVE TRIM (WITHOUT TRIM PAD)

  Guide p.499
  • 8M0129438This kit is for greater than 70 mph Single - Quad Engine Verado 200-400HP and Single - Dual Engine 500+HP DTS High Performance Sterndrives and using a VesselView 502 or 702 and newer display or using a VesselView Link and Lowrance or Simrad display.

• ACTIVE TRIM - 3.4L V6, 4.6L V8, 150HP FOURSTROKE, OPTIMAX 150-250HP - SINGLE ENGINE (WITHOUT TRIM PAD)

  Guide p.499
  • 8M0129439The function of the Active Trim is controlled on the screen of your Mercury VesselView 403, 502,703 or 903. It is compatible with a Lowrance or Simrad displays using the VesselView Link. This kit is only for use with single engine installations of Mercury 150hp 4-stroke outboard or 150-250hp OptiMax outboard with the Mercury VesselView System. Single Engine 3.4L V6, 4.6L V8, 150HP FourStroke and Optimax 150-250hp and using a VesselView 502 or 702 and newer display or using a VesselView Link and

• ACTIVE TRIM - 3.4L V6, 4.6L V8, 150HP FOURSTROKE, OPTIMAX 150-250HP - DUAL ENGINE (WITHOUT TRIM PAD)

  Guide p.499
  • 8M0129440This kit is compatible with Dual Engine 3.4L V6, 4.6L V8, 150HP FourStroke and Optimax 150-250hp and using a VesselView 502 or 702 and newer display or using a VesselView Link and Lowrance or Simrad display.

• ACTIVE TRIM - 75-115HP FOURSTROKE - SINGLE ENGINE (WITHOUT TRIM PAD)

  Guide p.499
  • 8M0129442The function of the Active Trim is controlled on the screen of your Mercury VesselView 403, 502,703 or 903. It is compatible with a Lowrance or Simrad display using the VesselView Link. This Active Trim kit is only for use with single engine non-tiller installations of Mercury 75-115hp outboards with the Mercury VesselView System. Single Engine 75-115HP FourStroke and using a VesselView 502 or 702 and newer display or using a VesselView Link and Lowrance or Simrad display (s/n 2B095049 and up).

• ACTIVE TRIM - MECHANICAL MERCRUISER - SINGLE ENGINE (WITHOUT TRIM PAD)

  Guide p.499
  • 8M0129457This kit is only for use with single engine installations of MerCruiser 4.5L or 6.2L with the Mercury VesselView System. Single Engine Mechanical Sterndrive 4.5L and 6.2L 300-350HP only and using a VesselView 502 or 702 and newer display or using a VesselView Link and Lowrance or Simrad display.

• ACTIVE TRIM - 75-115HP FOURSTROKE - DUAL ENGINE (WITHOUT TRIM PAD)

  Guide p.499
  • 8M0129456This kit is used with Dual Engine 75-115HP FourStroke applications and using a VesselView 502 or 702 and newer display or using a VesselView Link and Lowrance or Simrad display (s/n 2B095049 and up).

• ACTIVE TRIM - MECHANICAL MERCRUISER - DUAL ENGINE (WITHOUT TRIM PAD)

  Guide p.499
  • 8M0129458This kit is for Dual Engine Mechanical Sterndrive 4.5L and 6.2L 300 & 350HP only and using a VesselView 502 or 702 and newer display or using a VesselView Link and Lowrance or Simrad display.

• ACTIVE TRIM - PAD ONLY

  Guide p.500
  • 8M0112041Active trim pad for second helm and/or service replacement

• TRIM SENDER- 25-30 HP

  Guide p.500
  • 8M0205046Trim Sender kit for 25-30hp Compatible with analog or digital

• DIGITAL TRIM SENDER KIT - 40-60HP FOURSTROKE

  Guide p.500
  • 8M0109720Digital Trim Sender Kit 40-60HP FourStroke

• DIGITAL TRIM SENDER KIT - 75-115HP FOURSTROKE

  Guide p.500
  • 8M0109722Digital Trim Sender Kit 2.1L 75-115HP FourStroke

• TRIM SENSOR CONVERTER KIT

  Guide p.500
  • 8M0059529This kit will allow you to convert the signal from the digital sensor to an analog signal. It will allow you to drive an analog gauge for trim only without changing the sensor to an analog sensor. This kit will connect directly to the harness inside the engine cowl. F150 EFI FourStroke outboard engine only

• DIGITAL TO ANALOG CONVERTER

  Guide p.500
  • 8M0111837Enables use of analog trim gauge with digital trim sender F2 40-60 HP FourStrokes, 2.1L 75-115 HP FourStrokes and Optimax V6

• ACTIVE TRIM SIDE MOUNT ADAPTER KIT

  Guide p.500
  • 84 8M0114502Kit contains bullet to Molex connector to make Active Trim compatible with mechanical side mount control. Only required on boats utilizing mechanical side mount control

JUNCTION BOXES/JUNCTION BOX ACCESSORIES

• WEATHER CAP

  Guide p.500
  • 8M0210754Weather cap for SmartCraft junction box. Provides weather protection at unused junction box connection points.

• SMARTCRAFT WEATHER CAP

  Guide p.500
  • 8M0210752Weather Cap for SmartCraft Junction Box Provides weather protection at unused junction box connection points Priced individually, sold @ multiples of 24

• 10 PIN WEATHER CAP

  Guide p.500
  • 888507T10 pin weather cap with mounting tab. Used for harnessing that could plug into a Junction Box.

• SMARTCRAFT J-BOX TERMINATOR/RESISTOR

  Guide p.501
  • 859318T1SmartCraft Yellow 10-pin Terminator/Resistor. Provides CAN Bus termination for CAN P network.

• TERMINATOR ASSEMBLY

  Guide p.501
  • 8M0055652SmartCraft Red Terminator Can 1/P & H

• RESISTOR- TERMINATION- 2 PIN

  Guide p.501
  • 893388A01Blue 2-pin terminator/resistor Provides CAN bus termination for CAN Networks.

• BLUE CAN P RESISTOR

  Guide p.501
  • 82 8M0171627New DTS v10/v12 CAN P resistor

• HELM MPR 2 PIN WEATHER CAP

  Guide p.501
  • 86 8M0054244GT280 2 pin male weather cap. Used on Joystick (Zeus, Axius and JPO) applications for the Helm MPR connection harness 8M2021476.

• PLUG ASY DIAGNOSTIC PORT

  Guide p.501
  • 8M004633910 pin diagnostic port for use on any SmartCraft application. Used as a 10 pin diagnostic port for connecting Mercury Computer Diagnostic System (CDS) junction box connection. Typically gets mounted at the helm, out of line of sight so that a technician does not have to disassemble helm to plug into a 10 pin connection. Requires a harness from back of diagnostic port to a 10 pin SmartCraft connection in the rigging.

• J-BOX Y HARNESS

  Guide p.501
  • 84 8M0165555J-box Y harness

• 5-WAY J-BOX KIT W/3 WEATHER CAPS

  Guide p.501
  • 98 8M01655575-way J-box kit with 3 weather caps.

• 5-WAY J-BOX KIT @ 24 KIT

  Guide p.501
  • 8M01752935-way Jbox kit. Priced individually, sold @ multiples of 24

• J-BOX STACKING PLUG KIT

  Guide p.501
  • 23 8M0174363J-box Stacking Plug designed for easy vertical stacking of J-Boxes, allowing all plugs to be positioned on one side.

SMARTCRAFT GAUGE HARNESSES

• SC1000 SYSTEM TACHOMETER HARNESS

  Guide p.502
  • 84 879979T113 ft. (.9 meters) Tachometer Harness. Provides connection to SC1000 System Tachometer, horn and SC100 Series Gauges. Requires the use of SmartCraft Junction Boxes listed in SC1000 Section.

• 3 FOOT SMARTCRAFT EXTENSION HARNESS

  Guide p.502
  • 84 8M0138593All 10 pins are populated in this SmartCraft 3 foot extension harness. Used to extend SmartCraft connections up to 3 feet.

• DUAL ENGINE INSTRUMENT ADAPTER

  Guide p.502
  • 84 892323T01Allows gauges to be powered from any key switch on dual applications. Works with all SmartCraft compatible engines.

• TRIPLE ENGINE INSTRUMENT ADAPTER

  Guide p.502
  • 84 892323T08Allows gauges to be powered from any key switch on triple applications. Works with all SmartCraft compatible engines.

• HARNESS ASSEMBLY- DUAL

  Guide p.502
  • 84 892323A10Racing Dual engine Mechanical jbox adapter with CANP link and diodes. Use with racing mech 14 pin helm harness.

• QUAD ENGINE INSTRUMENT ADAPTER

  Guide p.502
  • 84 898284T01Allows gauges to be powered from any key switch on triple applications. Works with all SmartCraft compatible engines.

• TROLL CONTROL Y HARNESS

  Guide p.502
  • 84 8M0042976Y harness allows you to connect directly to main engine harness and the Troll Control kit without using a "J" box. Mechanical 14pin CANP breakout harness only. Not compatible with Next Gen DTS or any other CANH system. Used with Troll Control Kit 879365K08 (879365A08).

SC 100 LINK HARNESSES

• SYSTEM LINK ADAPTER KIT

  Guide p.502
  • 84 8M0052774Kit that drives SC100 Link Gauges from 10 Pin connection at the helm. Contains 10 pin to 3 pin adapter and 3 pin to 3 pin low voltage reset module. Engine must be capable of providing Tach Link output and gray analog tach wire must be populated in 10 pin connection at helm in order to utilize this kit.

• SYSTEM LINK RESET HARNESS

  Guide p.502
  • 898289T42Resets SC 100 gauges in the event of voltage drops due to starting engine with a low/weak battery. Use in conjunction with System Link Harness (84-892821K01). SmartCraft SC 100 gauges

• SC 100 DATA HARNESS

  Guide p.503
  • 84 880756T056 in. SmartCraft Extension Harness Provides data link extension between SC100 Series products.

• SC 100 DATA HARNESS

  Guide p.503
  • 84 880756T11 ft. (.3 meters) SmartCraft Extension Harness Provides data link extension between SC100 Series products.
  • 84 8M02107593 ft. (.9 meters) SmartCraft Extension Harness Provides data link extension between SC100 Series products.
  • 84 880756T1010 ft. (3.0 meters) SmartCraft Extension Harness Provides data link extension between SC100 Series products.
  • 84 880756T3030 ft. (9.1 meters) SmartCraft Extension Harness Provides data link extension between SC100 Series products.

10 PIN (YELLOW) DATA HARNESSES

• CAN DATA HARNESS - 10 PIN - NO RESISTORS DTS (YELLOW)

  Guide p.503
  • 84 879312T441 ft. (0.3 meter) SmartCraft data harness without resistors. Contains CAN 1, 2, and 3. Provides data link between SmartCraft System CAN Bus components on DTS applications (Digital Throttle & Shift).
  • 84 879312T452 ft. (0.6 meter) SmartCraft data harness without resistors. Contains CAN 1, 2, and 3. Provides data link between SmartCraft System CAN Bus components on DTS applications (Digital Throttle & Shift).
  • 84 879312T463 ft. (0.9 meter) SmartCraft data harness without resistors. Contains CAN 1, 2, and 3. Provides data link between SmartCraft System CAN Bus components on DTS applications (Digital Throttle & Shift).
  • 84 879312T474 ft. (1.2 meter) SmartCraft data harness without resistors. Contains CAN 1, 2, and 3. Provides data link between SmartCraft System CAN Bus components on DTS applications (Digital Throttle & Shift).

• CAN DATA HARNESS - 10 PIN - NO RESISTORS DTS (YELLOW)

  Guide p.503
  • 84 8M02107576 ft. (1.8 meter) SmartCraft data harness without resistors. Contains CAN 1, 2, and 3. Provides data link between SmartCraft System CAN Bus components on DTS applications (Digital Throttle & Shift).

• CAN DATA HARNESS - 10 PIN - NO RESISTORS (YELLOW)

  Guide p.503
  • 84 879969T1010 ft. (3.0 meter) SmartCraft data harness without resistors Provides data link between SmartCraft CAN P, X and H components.
  • 84 879969T1515 ft. (4.6 meter) SmartCraft data harness without resistors Provides data link between SmartCraft CAN P, X and H components.
  • 84 879969T2020 ft. (6.1 meter) SmartCraft data harness without resistors Provides data link between SmartCraft CAN P, X and H components.
  • 84 879969T3030 ft. (9.1 meter) SmartCraft data harness without resistors Provides data link between SmartCraft CAN P, X and H components.

• CAN DATA HARNESS - 10 PIN - NO RESISTORS (YELLOW)

  Guide p.503
  • 84 8M016662440 ft. (12.1 meter) SmartCraft data harness without resistors. Provides data link between SmartCraft CAN P, X and H components

• CAN DATA HARNESS - 10 PIN WITH ONE RESISTOR (YELLOW)

  Guide p.503
  • 84 879980T1010 ft. (3.0 meter) SmartCraft data harness with one resistor Provides data link between SmartCraft CAN P, X and H components.
  • 84 879980T1515 ft. (4.6 meter) SmartCraft data harness with one resistor Provides data link between SmartCraft CAN P, X and H components.
  • 84 879980T3030 ft. (9.1 meter) SmartCraft data harness with one resistor Provides data link between SmartCraft CAN P, X and H components.

10 PIN (BLUE) DATA HARNESSES

• CAN DATA HARNESS - 10 PIN NON DTS WITH RESISTORS (BLUE)

  Guide p.504
  • 84 879982T2020 ft. (6.1 meter) SmartCraft data harness with (2) termination resistors Includes connections for horn and link gauge. Provides data link between SmartCraft CAN P Components.
  • 84 879982B2020 ft. (6.1 meter) SmartCraft data harness with (2) termination resistors Includes connections for horn and link gauge. Provides data link between SmartCraft CAN P Components. Priced individually, sold @ multiples of 12
  • 84 879982T2525 ft. (7.6 meter) SmartCraft data harness with (2) termination resistors Includes connections for horn and link gauge. Provides data link between SmartCraft CAN P Components.
  • 84 879982T3030 ft. (9.1 meter) SmartCraft data harness with (2) termination resistors Includes connections for horn and link gauge. Provides data link between SmartCraft CAN P Components.

• CAN DATA HARNESS - 10 PIN - NO RESISTORS NON DTS (BLUE)

  Guide p.504
  • 84 879968T66 ft. (1.8 meter) SmartCraft data harness without resistors and no additional connections Provides data link between SmartCraft CAN P Components.
  • 84 879968T1010 ft. (3.0 meter) SmartCraft data harness without resistors and no additional connections Includes connections for horn and link gauge. Provides data link between SmartCraft CAN P Components.
  • 84 879968T1515 ft. (4.6 meter) SmartCraft data harness without resistors and no additional connections Provides data link between SmartCraft System CAN Bus Components
  • 84 879968T2020 ft. (6.1 meter) SmartCraft data harness without resistors and no additional connections Provides data link between SmartCraft System CAN Bus Components
  • 84 879968T3030 ft. (9.1 meter) SmartCraft data harness without resistors and no additional connections Provides data link between SmartCraft System CAN Bus Components
  • 84 879968T5050 ft (15.2 meter) SmartCraft data harness without resistors and no additional connections Provides data link between SmartCraft System CAN Bus Components

• CAN DATA HARNESS - 10 PIN - ONE RESISTOR NON DTS (BLUE)

  Guide p.504
  • 84 879981T1010 ft. (3.0 meter) SmartCraft data harness with one resistor Provides data link between SmartCraft System CAN Bus Components
  • 84 879981T1515 ft. (4.6 meter) SmartCraft data harness with one resistor Provides data link between SmartCraft System CAN Bus Components
  • 84 879981T2020 ft. (6.1 meter) SmartCraft data harness with one resistor Provides data link between SmartCraft System CAN Bus Components
  • 84 879981B2020 ft. (6.1 meter) SmartCraft data harness with one resistor Provides data link between SmartCraft System CAN Bus Components Priced individually, sold @ multiples of 12
  • 84 879981T2525 ft. (7.6 meter) SmartCraft data harness with one resistor Provides data link between SmartCraft System CAN Bus Components
  • 84 879981T3030 ft. (9.1 meter) SmartCraft data harness with one resistor Provides data link between SmartCraft System CAN Bus Components
  • 84 879981T5050 ft. (15.2 meter) SmartCraft data harness with one resistor Provides data link between SmartCraft System CAN Bus Components

ADAPTER HARNESSES - 10 PIN

• ADAPTER-10 PIN

  Guide p.504
  • 84 892452T01Male to male 10 pin adapter cable. Allows connection between CAN 1 communication cable and Command Module harness in applications where a junction box is used.

• ADAPTER 10-PIN

  Guide p.504
  • 84 8M0207791Cable assembly, female to female 10-pin adapter.

• "Y" ADAPTER HARNESS - LINK ADAPTER

  Guide p.505
  • 84 8M0082859Used on DTS engines that require extend length CAN networks. Used for long data run multi-engine applications, primarily those utilizing CAN H.

• TRIPLE/QUAD LINK HARNESS

  Guide p.505
  • 98 8M007159810 ft. Allows multiple Joystick engines to communicate with each command module. 10 pin Joystick link harness containing CAN P and CAN H

• TRIPLE/QUAD DTS LINK HARNESS

  Guide p.505
  • 84 8M007712415 ft. Allows multiple DTS engine connections to link systems to communicate with each command module. 2005 - Present DTS engines CAN P and CAN H Data
  • 84 8M007712520 ft. Allows multiple DTS engine connections to link systems to communicate with each command module. 2005 - Present DTS engines CAN P and CAN H Data
  • 84 8M017694325 ft. Allows multiple DTS engine connections to link systems to communicate with each command module. 2005 - Present DTS engines CAN P and CAN H Data

• TRIPLE/QUAD DTS LINK HARNESS

  Guide p.505
  • 84 8M017694430 ft. Allows multiple DTS engine connections to link systems to communicate with each command module. 2005 - Present DTS engines CAN P and CAN H Data

• CAN P LINK HARNESS ASSEMBLY

  Guide p.505
  • 84 891957K01Link cable in connected between junction boxes to allow communication between port and starboard systems in dual applications.

ADAPTER HARNESSES - 2 PIN

• 2 PIN LINK HARNESS- CAN

  Guide p.505
  • 84 893452A01Used to link CAN Networks together.

• 2 PIN "Y" ADAPTER HARNESS - LINK ADAPTER

  Guide p.505
  • 84 896370T01Used on DTS engines that require extended length CAN networks.

ADD-ON SENSOR HARNESSES

• ADVANCED SOUND CONTROL KIT

  Guide p.505
  • 8M0143359Provides an interface for a dash-mounted dedicated button or switch to manipulate the Advanced Sound Control capability on Verdao AMS applications (4.6L V8 only). Optional kit for Verado AMS applications (4.6L V8) that is not required when a version 9 SmartCraft gauge or a VesselView403/502/702/903 or compatible Simrad or Lowrance display is used (control capability is within the user interface).

• OIL LEVEL STATUS KIT

  Guide p.505
  • 8M0142265Optional kit for to report oil level status to be used in conjunction with SmartCraft gauges or displays. Feature comes standard on 4.6L V8 Verado AMS. Can be added to 3.4L V6 and 4.8L V8 engines that do not have this feature. Oil level status can be viewed on VesselViews and SmartCraft gauges.

• DIGITAL BLOCK WATER PRESSURE SENSOR

  Guide p.506
  • 71 8M0142696Optional kit to add digital block water pressure to the SmartCraft data stream. Applicable to the non-DTS 3.4L V6 and 4.6L V8 engines (DTS versions have this sensor as standard).

• ANALOG BLOCK WATER PRESSURE SENDER

  Guide p.506
  • 8M0145165Optional kit to add analog block water pressure feature to a digital engine. Applicable to DTS 3.4L V6 and 4.6L V8 engines (mechanical engines have this sensor as standard).

• BOAT HARNESS ADAPTER

  Guide p.506
  • 84 898285T01Needed in order to adapt newer engines that are equipped with a female 6-pin connector to a 6-pin female boat harness.

• BOAT HARNESS ADAPTER- 6 PIN F- 6 PIN F 6'

  Guide p.506
  • 84 883459T01Needed in order to adapt newer engines that are equipped with a female 6-pin connector to connect to a 6-pin female boat harness.

• FUEL TANK HARNESS

  Guide p.506
  • 84 898289T75120 inch Harness needed to connect tank senders to the 350 Verado SCI and sterndrive models 565 through 1650. Used with all engines, including 450R and V12.
  • 84 898289T76240 inch Harness needed to connect fuel tank senders to the 350 Verado SCI and sterndrive models 565 through 1650.

• HARNESS- 6-PIN

  Guide p.506
  • 84 8M00604206pin engine to 2pin WIF sensor, used if not reading tank level. No SmartCraft fuel or paddle included.

• BULLET CONNECTOR HARNESS ADAPTER

  Guide p.506
  • 84 8M0060421Bullet connector to 2 pin WIF sensor. Used with fuel/paddle harness 150 and smaller engines that only support one fuel level.

• ADAPTER HARNESS

  Guide p.506
  • 84 8M0137199Racing 350SCI to 400R Fuel/Paddle/Vessel harness adapter.

BLOCK WATER PRESSURE SENDER

• BLOCK WATER PRESSURE DIGITAL KIT

  Guide p.506
  • 8M0089111Digital sensor to provide block water pressure on SmartCraft gauges. 2.1L F75-115 Four Stroke

TRIM SENSORS

• POWER TRIM SENDER

  Guide p.507
  • 891777A01Starboard Mounted. Required for digital gauge applications. Fits SmartCraft compatible engines.

• SENSOR ASSEMBLY- TRIM

  Guide p.507
  • 8M0095310Sender assembly w/ trim. Fits all MerCruiser DTS engines, 496 Mag and 8.2L MPI models that do not require an analog sender to run analog gauges. All PCM 112 Mercury 4.5L & 6.2 engines. All MCM Racing engines 2003 and later. All MCM Diesel SmartCraft engines w/2.2 and 2.5 software.

• SENSOR KIT- TRIM

  Guide p.507
  • 863187A2Sensor kit w/ trim. Fits all SmartCraft compatible MerCruiser and Mercury Racing product when these models have the 555 ECM. Also used on CMD engines.

PITOT KITS

• PITOT/SPEED SENSOR KIT

  Guide p.507
  • 881879A2100 PSI for speeds less than 80 mph. Mounts to either the MerCruiser sterndrive transom bracket or to the boat near the engine. All parts required for mounting and connecting the sensor are included in the kit. Fits all SmartCraft compatible MerCruiser and Mercury Racing product.

• PITOT/SPEED SENSOR KIT

  Guide p.507
  • 881879A3200 PSI for speeds greater than 80 mph. Mounts to either the MerCruiser sterndrive transom bracket or to the boat near the engine. All parts required for mounting and connecting the sensor are included in the kit. Fits all SmartCraft compatible MerCruiser and Mercury Racing product.

• PITOT/SPEED SENSOR KIT

  Guide p.507
  • 881879A13100 PSI for speeds less than 80 mph. Mounts to either the MerCruiser sterndrive transom bracket or to the boat near the engine. All parts required for mounting and connecting the sensor are included in the kit. Includes 84-863931 harness (flat 4 pin to transom 10 pin) and 84-863737 harness (round 3 pin to flat 4 pin). Used on current 10 pin harness applications only. Fits all SmartCraft compatible MerCruiser and Mercury Racing product.

• PITOT/SPEED SENSOR KIT

  Guide p.508
  • 881879A15100 PSI for speeds less than 80 mph. Mounts to either the MerCruiser sterndrive transom bracket or to the boat near the engine. All parts required for mounting and connecting the sensor are included in the kit. Only includes the 84-863737 harness (round 3 pin to flat 4 pin). Fits all SmartCraft compatible MerCruiser and Mercury Racing product.

• SMARTCRAFT PITOT SENSOR KIT

  Guide p.508
  • 8M0090447Pitot sensor kit provides speed information for SmartCraft gauges. 2.1L F75-115 Four Stroke and 150 Four Stroke

• SMARTCRAFT PITOT SENSOR (SPEED)

  Guide p.508
  • 8M0103315100 psi SmartCraft Pitot sensor for speed input Verado Gen 5 350 HP engine only, all other Gen 5 Verado engines come with Pitot speed sensor

• PRESSURE TRANSDUCER KIT

  Guide p.508
  • 859210A1Speed pressure transducer is either mounted to the transom bracket or a location near the engine. 100 PSI sensor is plumbed to a speed pickup tube and then wired to the engine sensor plug included with SmartCraft Gauges. Fits 2002 and newer OptiMax outboard engines at speeds less than 80 mph.

GPS KITS

• N2K GPS KIT W/ MOUNTS

  Guide p.508
  • 8M6012227Smartcraft/NMEA 2000 GPS kit with mounts. Cable not included, need to purchase N2K or 10pin-5pin cable.

• SMARTCRAFT OR NMEA2000 GPS ANTENNA

  Guide p.508
  • 8M0130792SmartCraft or NMEA2000 capable GPS Antenna. Used with any system needing a SmartCraft GPS source OR NMEA2000 GPS source. GPS autodetects which system it is connected to and communicates correctly. GPS can be used for all of the following applications: SC1000 gauge speed source, SmartTow speed source, Active Trim without dash pad speed source or NMEA2000 speed and position source.

• TOP MOUNT KIT - GPS

  Guide p.508
  • 98 8M6009518Compact SmartCraft / N2K GPS top mount kit. Note, the 8M6012227 kit has this mount included.

• UNDER HELM GPS MOUNT KIT

  Guide p.508
  • 98 8M6009519Compact SmartCraft / N2K GPS under-helm mount kit. Note, the 8M6012227 kit has this mount included.

• GPS EXTENSION CABLE

  Guide p.508
  • 84 879171T213.2 foot extension cable to be used with GPS Kit (8M0024918) CAN P GPS signal for non Auto Pilot equipped boats
  • 84 879171T226.6 foot extension cable to be used with GPS Kit (8M0024918) CAN P GPS signal for non Auto Pilot equipped boats
  • 84 879171T239.8 foot extension cable to be used with GPS Kit (8M0024918) CAN P GPS signal for non Auto Pilot equipped boats

NMEA2000 COMPONENTS

• NMEA2000 6-WAY JUNCTION BOX

  Guide p.511
  • 84 8M0138268Rather than using individual T's, use a rock-solid distribution block to build your NMEA2000 network. Has 6 individual connectors. Works with any NMEA2000 standard 5 pin connector and can support both male and female termination resistors.

• MALE - FEMALE 5-PIN EXTENSION HARNESS

  Guide p.511
  • 84 879171T010.5 meter long harness to extend any NMEA 2000 backbone or Mercury CAN H bus for IMU/GPS signal.
  • 84 879171T021 meter long harness to extend any NMEA 2000 backbone or Mercury CAN H bus for IMU/GPS signal.
  • 84 879171T032 meter long harness to extend any NMEA 2000 backbone or Mercury CAN H bus for IMU/GPS signal.
  • 84 879171T043 meter long harness to extend any NMEA 2000 backbone or Mercury CAN H bus for IMU/GPS signal.
  • 84 879171T054 meter long harness to extend any NMEA 2000 backbone or Mercury CAN H bus for IMU/GPS signal.
  • 84 879171T065 meter long harness to extend any NMEA 2000 backbone or Mercury CAN H bus for IMU/GPS signal.
  • 84 879171T076 meter long harness to extend any NMEA 2000 backbone or Mercury CAN H bus for IMU/GPS signal.
  • 84 879171T087 meter long harness to extend any NMEA 2000 backbone or Mercury CAN H bus for IMU/GPS signal.
  • 84 879171T098 meter long harness to extend any NMEA 2000 backbone or Mercury CAN H bus for IMU/GPS signal.
  • 84 879171T109 meter long harness to extend any NMEA 2000 backbone or Mercury CAN H bus for IMU/GPS signal.
  • 84 879171T1110 meter long harness to extend any NMEA 2000 backbone or Mercury CAN H bus for IMU/GPS signal.

• NMEA 2000 MULTI STARTER KIT

  Guide p.511
  • 98 8M0155341Starter Kit includes NMEA 2000 power harness, 1 male termination resistor, 1 female termination resistor and a 6 connector NMEA 2000 distribution block (4way T). Whenever a NMEA 2000 backbone is required, these are the basic components required to start that architecture

• NMEA 2000 STARTER KIT

  Guide p.511
  • 8M0110642Kit includes NMEA 2000 power harness, 1 male termination resistor, 1 female termination resistor and a "T" connector Whenever a NMEA2000 backbone is required, these are the basic components required to start that architecture

• NMEA 2000 POWER HARNESS

  Guide p.511
  • 84 8M0114012NMEA 2000 power harness. Overmolded NMEA 2000 connector with fused harness. Used to provide power to the NMEA 2000 bus.

• NMEA 2K TEE

  Guide p.511
  • 8M0204742NMEA 2000 Tee device

• NMEA2000 RESISTOR - FEMALE

  Guide p.512
  • 8M6004831NMEA2000 Resistor - Female pins NMEA2000 networks require two termination resistors: one male and one female

• NMEA2000 RESISTOR - MALE

  Guide p.512
  • 8M6004830NMEA2000 Resistor - Male pins NMEA2000 networks require two termination resistors: one male and one female

• NMEA 2000 WEATHER CAP

  Guide p.512
  • 86 8M6000708NMEA 2000 weather cap (male thread in). Used to cap an open connection on NMEA 2000 network.

• NMEA2000 WEATHER CAP - FEMALE

  Guide p.512
  • 8M0176362Replacement weather cap for NMEA2K connector on back of VesselView. Used on VV403, VV502, VV703 and VV903

KITS

• MECHANICAL SMARTTOW HELM KIT

  Guide p.512
  • 8M0101650SmartTow and Cruise are now available on MerCruiser gas engine platforms that utilize mechanical throttle and shift controls! What was previously only available on DTS applications can now be used on the latest gas engine platforms from MerCruiser NOTE: This helm kit requires an engine to helm harness and can be utilized on the applicable marine-specific MerCruiser gas engine platforms developed by Mercury. Also requires a gauge that is Cruise/SmartTow capable. Can be used with Zero Off capable

• SMARTTOW: ENGINE TO HELM HARNESS

  Guide p.512
  • 84 8M010164220 ft. harness. Connects the marine-specific MerCruiser gas engine to the helm kit for Cruise/SmartTow functionality on mechanical engines. Single engine only marine-specific MerCruiser gas engine applications
  • 84 8M010164325 ft. harness. Connects the marine-specific MerCruiser gas engine to the helm kit for Cruise/SmartTow functionality on mechanical engines. Single engine only marine-specific MerCruiser gas engine applications

• SMARTCRAFT AUTHENTICATION DEVICE

  Guide p.512
  • 8M0105518Now you can operate applicable MerCruiser engines (mechanical and DTS) with applicable gauges (Medallion, FW Murphy, etc) by using this authentication interface device to enable advanced SmartCraft features. Mechanical marine-specific MerCruiser gas engines and all DTS engines in conjunction with an applicable third-party SmartCraft gauge that is specifically compatible with this authentication interface device.

ADD-ON SENSOR RIGGING KITS - MCM

• SPEEDO-PITOT HARNESS

  Guide p.513
  • 84 863737TRequired for newer engines that do not have the speedo-pitot harness included with engine harness. Fits non-DTS smallblock and V-6 MerCruiser engines prior to serial 0W600000.

• STEERING/SPEEDO-PITOT HARNESS

  Guide p.513
  • 84 863736TRequired for engines that do not have the steering/speedo-pitot harness included with engine harness. Fits all SmartCraft compatible MerCruiser and Mercury Racing products.

ADD-ON SENSOR HARNESSES - MCM

• TRANSOM HARNESS

  Guide p.513
  • 84 863931A1Used to connect Steering/Speedo Sensor Kit 863188A 3 to MCM 4.3L, 5.0L, 5.7L (350Mag) and 6.2L MPI sterndrive engines. Fits non-DTS smallblock and V-6 MerCruiser engines prior to serial 0W600000.

• 3-PIN TANK HARNESS

  Guide p.513
  • 84 864218Fits older MCM/MIE mechanical engines that are equipped with a 3-pin tank harness connector.

• 3.4L/4.6L REPOWER HARNESS KIT

  Guide p.513
  • 84 8M0145987Make easy work of repowering that Optimax or Verado to the newer 3.4L V6 or 4.6L V8 Fourstroke engines. Kit contains a wide variety of harnesses: 4 pin depth extension harness, 2 pin clean power extension harness, 2 pin WIF extension harness, 6 pin fuel/paddle extension harness, 14 pin data cable extension harness, 10 pin blue data cable extension harness, 3 pin power steering extension harness and 10 pin male to male gender bender harness. Repower harness kit has a wide variety of harnesses tha

STEERING ANGLE SENSORS

• STEERING/SPEEDO SENSOR KIT

  Guide p.513
  • 863188A3Provides steering angle and degrees, and speed to SmartCraft instruments so gauge can display steering position and speed - useful when docking. Includes steering/speedo-pitot harness P/N 84-863736, required for newer engines that do not have the steering/speedo-pitot harness included with engine harness. Fits all SmartCraft compatible MerCruiser and Mercury Racing products.

• STEERING SENSOR KIT

  Guide p.513
  • 863188T4Provides steering angle and degrees to SmartCraft instruments so gauge can display steering position - useful when docking. Fits all SmartCraft compatible MerCruiser and Mercury Racing products.

• STEERING SENSOR KIT

  Guide p.514
  • 863188A5Provides steering angle and degrees to SmartCraft instruments so gauge can display steering position - useful when docking. Includes steering harness 84-864219 & 84-863931 Fits all SmartCraft compatible MerCruiser and Mercury Racing product . Also used on CMD engines

SMARTCRAFT K-PLANES - HARNESSES

• TRIM TAB INTERFACE KIT

  Guide p.514
  • 8M0100069Shows digital K-Plane trim on SmartCraft Instrumentation. For use with digital K-Planes and SmartCraft Instrumentation.

• DTS TAB INTERFACE MODULE KIT

  Guide p.514
  • 98 8M0169899DTS tab interface module kit for next gen DTS only. LCM next gen has active trim built in. Compatible with all OB and 4.5L/6.2L/8.2L MCM. Not used with 8.6L Racing.

• K-PLANE Y HARNESS

  Guide p.514
  • 84 895820T02K-Plane Tab Y harness for dual tabs. Harness from bullet tab sensor to 4 pin tab interface.

• HARNESS ASSEMBLY

  Guide p.514
  • 84 898059T15Tab extension, 15 feet. Used to extend the harness included with Digital Trim Tabs to plug directly into the harness included with SystemView Race Edition. REQUIRED for all installations with Digital Tabs and SystemView Race Edition EXCEPT Mercury Racing Sterndrives with New Style 14-Pin Engine Harness connector.
  • 84 898059T20Tab extension, 20 feet. Used to extend the harness included with Digital Trim Tabs to plug directly into the harness included with SystemView Race Edition. REQUIRED for all installations with Digital Tabs and SystemView Race Edition EXCEPT Mercury Racing Sterndrives with New Style 14-Pin Engine Harness connector.
  • 84 898059T25Tab extension, 25 feet. Used to extend the harness included with Digital Trim Tabs to plug directly into the harness included with SystemView Race Edition. REQUIRED for all installations with Digital Tabs and SystemView Race Edition EXCEPT Mercury Racing Sterndrives with New Style 14-Pin Engine Harness connector.
  • 84 898059T30Tab extension, 30 feet. Used to extend the harness included with Digital Trim Tabs to plug directly into the harness included with SystemView Race Edition. REQUIRED for all installations with Digital Tabs and SystemView Race Edition EXCEPT Mercury Racing Sterndrives with New Style 14-Pin Engine Harness connector.