Current CBRT rate: 46,96 ₺ / US$ · 2026-07-10 — ₺ prices are calculated at this rate and exclude VAT.

Merkür Deniz

Accessory Guide

The Controls & Rigging section of the 2025 Quicksilver guide: from instruments to steering systems, listed by part number. Parts showing a price are available from our catalog — click the part number to open the detail page and add to cart.

SmartCraft InstrumentsAnalog Gauge SeriesAnalog InstrumentsDTS Remote ControlsMechanical Remote ControlsThrottle & Shift CablesSteeringJoystick RiggingDTS RiggingSmartCraft RiggingDiesel RiggingAvator Rigging (Electric)ElectricalK-Planes (Trim Tabs)Installation & Tools

Joystick Rigging

46 products

JOYSTICK FEATURES

  • AUXILIARY JOYSTICK QUAD ENGINE

    Guide p.468
    • 8M0117143Auxiliary joystick is a joystick only station, perfect for larger boats and able to be mounted in a convenient location. Includes all components necessary for mounting. If 2 auxiliary joysticks are being installed, a DTS shadow mode resistor pack is needed in addition to this. If full remote controls are being added at those auxiliary stations as well, need (1) additional 898091T02 for each. Quad engine JPO and Zeus

  • JOYSTICK ASSEMBLY

    Guide p.468
    • 879365A21The Joystick assembly is part of multiple Joystick Piloting kits to make boating easy. The Joystick steering is offered across multiple engine systems. Joystick Piloting for Outboards (JPO), Joystick Piloting for Sterndrive (JPS) and ZEUS for Diesel.

  • JOYSTICK ASSEMBLY

    Guide p.468
    • 8M0178012Joystick Assembly used in multi-engine Joystick Piloting applications, included in the rigging kits. Service component for Joystick Piloting applications circa mid-2016 and later.

  • JOYSTICK ASSEMBLY

    Guide p.469
    • 8M0118806Joystick assembly used in Joystick Piloting for Inboards - single engine applications, included in the rigging kit. Service component for Joystick Piloting for Inboards - single engine applications.

  • JOYSTICK ASSEMBLY

    Guide p.469
    • 8M0118808Joystick assembly used in Joystick Piloting for Inboards - dual engine applications, included in the rigging kits. Service component for Joystick Piloting for Inboards - dual engine applications.

  • JOYSTICK ASSEMBLY-SINGLE

    Guide p.469
    • 8M0224262Single engine Joystick steering

  • HELM PANEL BOARD -AUXILIARY JOYSTICK

    Guide p.469
    • 8M0071505This panel board includes parts needed to add Auxiliary Joystick for SC 2.5. Twin (SC 2.5 - QSB).

  • ELECTRONIC STEERING HELM ACTUATOR

    Guide p.469
    • 8M8025733Electronic Steering Helm Actuator used in Joystick Piloting applications, included in the rigging kits Service component for Joystick Piloting applications prior to mid-2016 and earlier

  • INERTIAL MEASUREMENT UNIT

    Guide p.469
    • 8M6002180The Inertial Measurement Unit (IMU) contains software version 3.1. The IMU is used with all Joystick Piloting applications - Outboard, Sterdrive and Zeus.

  • SMARTCRAFT GPS ANTENNA 400

    Guide p.469
    • 8M0091565SmartCraft GPS Antenna (4.0.12SC) Used with SmartTow Pro SC1000 gauges, MercMonitors, and VesselViews 4 and 7. Sends CAN H and CAN P GPS data for use with GPS SmartTow and Joystick Piloting boats with Auto Pilot. Software 4.0.12SC

  • COMBO GPS/IMU

    Guide p.469
    • 8M0168463Combo GPS/IMU used in Joystick Piloting applications. Service component for Joystick Piloting applications circa mid-2016 and later.

  • CAN H GATEWAY

    Guide p.470
    • 8M0095543Utilized in Joystick applications (typically included in the full rigging kit), provides an interface between CAN H GPS & IMU and the NMEA2000 device (approved chart plotter). Allows for adavanced features such at Waypoint Sequencing, AutoHeading and SkyHook Can be used on any Joystick application as an interface between CAN H and NMEA0183 OR NMEA2000. Not required for systems with the VesselView 4 or 7 display RTM5 software release that are using a NMEA2000 approved chartplotter

  • JOYSTICK: MAIN POWER RELAY HARNESS - 20 FT.

    Guide p.470
    • 84 897345T08Powers CCMs and TVMs for Joystick installations. Used in addition to 5 amp clean power harness. (20 ft. long)

  • 10 PIN TO 5 PIN CAN H ADAPTER

    Guide p.470
    • 84 8M0115495Adapter harness that goes from 10 pin SmartCraft connector to 5 pin CAN H connector Used for certain Joystick applications

  • JOYSTICK LINK CABLE - 26 INCH CENTERS

    Guide p.470
    • 8M0077126Link cable to be used on outboard joystick applications to ensure prevention of engines contacting each other. This item includes a 27 inch cable, which is to be used with engines mounted at a 26 inch center distance. Mercury Joystick Piloting for Outboards, with engines mounted on 26 inch centers.

  • JOYSTICK LINK CABLE - 27 INCH CENTERS

    Guide p.470
    • 8M0077129Link cable to be used on outboard joystick applications to ensure prevention of engines contacting each other. This item includes a 28 inch cable, which is to be used with engines mounted at a 27 inch center distance. Mercury Joystick Piloting for Outboards, with engines mounted on 27 inch centers.

  • JOYSTICK LINK CABLE - 28 INCH CENTERS

    Guide p.470
    • 8M0077130Link cable to be used on outboard joystick applications to ensure prevention of engines contacting each other. This item includes a 29 inch cable, which is to be used with engines mounted at a 28 inch center distance. Mercury Joystick Piloting for Outboards, with engines mounted on 28 inch centers.

  • JOYSTICK LINK CABLE - 29 INCH CENTERS

    Guide p.470
    • 8M0077133Link cable to be used on outboard joystick applications to ensure prevention of engines contacting each other. This item includes a 30 inch cable, which is to be used with engines mounted at a 29 inch center distance. Mercury Joystick Piloting for Outboards, with engines mounted on 29 inch centers.

  • JOYSTICK LINK CABLE - 30 INCH CENTERS

    Guide p.470
    • 8M0077134Link cable to be used on outboard joystick applications to ensure prevention of engines contacting each other. This item includes a 31 inch cable, which is to be used with engines mounted at a 30 inch center distance. Mercury Joystick Piloting for Outboards, with engines mounted on 30 inch centers.

  • JOYSTICK LINK CABLE - 31 INCH CENTERS

    Guide p.470
    • 8M0077135Link cable to be used on outboard joystick applications to ensure prevention of engines contacting each other. This item includes a 32 inch cable, which is to be used with engines mounted at a 31 inch center distance. Mercury Joystick Piloting for Outboards, with engines mounted on 31 inch centers.

  • JOYSTICK LINK CABLE - 32 INCH CENTERS

    Guide p.470
    • 8M0077136Link cable to be used on outboard joystick applications to ensure prevention of engines contacting each other. This item includes a 33 inch cable, which is to be used with engines mounted at a 32 inch center distance. Mercury Joystick Piloting for Outboards, with engines mounted on 32 inch centers.

  • JOYSTICK LINK CABLE - 33 INCH CENTERS

    Guide p.470
    • 8M0077137Link cable to be used on outboard joystick applications to ensure prevention of engines contacting each other. This item includes a 34 inch cable, which is to be used with engines mounted at a 33 inch center distance. Mercury Joystick Piloting for Outboards, with engines mounted on 33 inch centers.

  • JOYSTICK LINK CABLE - 34 INCH CENTERS

    Guide p.470
    • 8M0077138Link cable to be used on outboard joystick applications to ensure prevention of engines contacting each other. This item includes a 35 inch cable, which is to be used with engines mounted at a 34 inch center distance. Mercury Joystick Piloting for Outboards, with engines mounted on 34 inch centers.

  • JOYSTICK LINK CABLE - 35 INCH CENTERS

    Guide p.470
    • 8M0077139Link cable to be used on outboard joystick applications to ensure prevention of engines contacting each other. This item includes a 36 inch cable, which is to be used with engines mounted at a 35 inch center distance. Mercury Joystick Piloting for Outboards, with engines mounted on 35 inch centers.

  • JOYSTICK LINK CABLE - 25 INCH CENTERS, QUAD ONLY

    Guide p.471
    • 8M0109000Link cable to be used on outboard joystick applications to ensure prevention of engines contacting each other. This item includes a 23 inch adjustable cable, which is to be used with engines mounted at a 25 inch center distance. (quads only) Mercury Joystick Piloting for Outboards, with quad engines mounted on 25 inch centers.

  • JOYSTICK LINK CABLE - 26 INCH CENTERS, QUAD ONLY

    Guide p.471
    • 8M0108999Link cable to be used on outboard joystick applications to ensure prevention of engines contacting each other. This item includes a 24 inch adjustable cable, which is to be used with engines mounted at a 26 inch center distance. (quads only) Mercury Joystick Piloting for Outboards, with quad engines mounted on 26 inch centers.

  • JOYSTICK LINK CABLE - 28 INCH CENTERS, QUAD ONLY

    Guide p.471
    • 8M0079945Link cable to be used on outboard joystick applications to ensure prevention of engines contacting each other. This item includes a 26 inch adjustable cable, which is to be used with engines mounted at a 28 inch center distance. (quads only) Mercury Joystick Piloting for Outboards, with quad engines mounted on 28 inch centers.

HOSE ASSEMBLIES

  • POWER STEERING HOSE - BULKHEAD TO CYLINDER TANK

    Guide p.471
    • 32 8M0077079.5 inch hose, bulkhead to cylinder tank for joystick applications.
    • 32 8M0077080.5 inch hose, bulkhead to cylinder tank for joystick applications.
    • 32 8M0077081.5 inch hose, bulkhead to cylinder tank for joystick applications.

  • POWER STEERING HOSE - BULKHEAD TO CYLINDER PRESSURE

    Guide p.471
    • 32 8M00770822 ft, .375 inch hose, bulkhead to cylinder pressure for joystick piloting outboard applications and for normal power steering. ORFS -6 Female to ORFS -6 Female. Must order 2 per cylinder.
    • 32 8M00770833 ft, .375 inch hose, bulkhead to cylinder pressure for joystick piloting outboard applications and for normal power steering. ORFS -6 Female to ORFS -6 Female. Must order 2 per cylinder.
    • 32 8M00770844 ft, .375 inch hose, bulkhead to cylinder pressure for joystick piloting outboard applications and for normal power steering. ORFS -6 Female to ORFS -6 Female. Must order 2 per cylinder.

POWER STEERING HOSE KITS-JOYSTICK PILOTING

  • POWER STEERING HOSE KIT - GEN C POWER MODULE TO HELM

    Guide p.471
    • 32 8M0150604Kit includes two hoses of same length (2 ft.) to connect the Gen C Power Module to the Helm (Power Steering). All Mercury Power Steering
    • 32 8M0150605Kit includes two hoses of same length (3 ft.) to connect the Gen C Power Module to the Helm (Power Steering). All Mercury Power Steering
    • 32 8M0150606Kit includes two hoses of same length (4 ft.) to connect the Gen C Power Module to the Helm (Power Steering). All Mercury Power Steering
    • 32 8M0150607Kit includes two hoses of same length (5 ft.) to connect the Gen C Power Module to the Helm (Power Steering). All Mercury Power Steering
    • 32 8M0150608Kit includes two hoses of same length (6 ft.) to connect the Gen C Power Module to the Helm (Power Steering). All Mercury Power Steering
    • 32 8M0150610Kit includes two hoses of same length (7 ft.) to connect the Gen C Power Module to the Helm (Power Steering). All Mercury Power Steering
    • 32 8M0150612Kit includes two hoses of same length (8 ft.) to connect the Gen C Power Module to the Helm (Power Steering). All Mercury Power Steering
    • 32 8M0150613Kit includes two hoses of same length (10 ft.) to connect the Gen C Power Module to the Helm (Power Steering). All Mercury Power Steering
    • 32 8M0150614Kit includes two hoses of same length (12 ft.) to connect the Gen C Power Module to the Helm (Power Steering). All Mercury Power Steering
    • 32 8M0150615Kit includes two hoses of same length (14 ft.) to connect the Gen C Power Module to the Helm (Power Steering). All Mercury Power Steering
    • 32 8M0150616Kit includes two hoses of same length (18 ft.) to connect the Gen C Power Module to the Helm (Power Steering). All Mercury Power Steering
    • 32 8M0150617Kit includes two hoses of same length (18 ft.) to connect the Gen C Power Module to the Helm (Power Steering). All Mercury Power Steering
    • 32 8M0150618Kit includes two hoses of same length (20 ft.) to connect the Gen C Power Module to the Helm (Power Steering). All Mercury Power Steering
    • 32 8M0150619Kit includes two hoses of same length (22 ft.) to connect the Gen C Power Module to the Helm (Power Steering). All Mercury Power Steering
    • 32 8M0150620Kit includes two hoses of same length (24 ft.) to connect the Gen C Power Module to the Helm (Power Steering). All Mercury Power Steering
    • 32 8M0150621Kit includes two hoses of same length (26 ft.) to connect the Gen C Power Module to the Helm (Power Steering). All Mercury Power Steering
    • 32 8M0150622Kit includes two hoses of same length (28 ft.) to connect the Gen C Power Module to the Helm (Power Steering). All Mercury Power Steering
    • 32 8M0150623Kit includes two hoses of same length (30 ft.) to connect the Gen C Power Module to the Helm (Power Steering). All Mercury Power Steering
    • 32 8M0150624Kit includes two hoses of same length (32 ft) to connect the Gen C Power Module to the Helm. (Power Steering) All Mercury power steering.

  • POWER STEERING HOSE - BULKHEAD TO CYLINDER PRESSURE

    Guide p.472
    • 32 8M60048881.5 ft, .375 inch hose, bulkhead to cylinder pressure for joystick piloting outboard applications and for normal power steering. ORFS -6 Female to ORFS -6 Female. Must order 2 per cylinder.
    • 32 8M00770822 ft, .375 inch hose, bulkhead to cylinder pressure for joystick piloting outboard applications and for normal power steering. ORFS -6 Female to ORFS -6 Female. Must order 2 per cylinder.

  • POWER STEERING HOSE - BULKHEAD TO CYLINDER TANK

    Guide p.472
    • 32 8M0077079.5 inch hose, bulkhead to cylinder tank for joystick applications.

  • POWER STEERING HOSE - BULKHEAD TO CYLINDER PRESSURE

    Guide p.472
    • 32 8M00770833 ft, .375 inch hose, bulkhead to cylinder pressure for joystick piloting outboard applications and for normal power steering. ORFS -6 Female to ORFS -6 Female. Must order 2 per cylinder.

  • POWER STEERING HOSE - BULKHEAD TO CYLINDER TANK

    Guide p.472
    • 32 8M0077080.5 inch hose, bulkhead to cylinder tank for joystick applications.

  • POWER STEERING HOSE - BULKHEAD TO CYLINDER PRESSURE

    Guide p.472
    • 32 8M00770844 ft, .375 inch hose, bulkhead to cylinder pressure for joystick piloting outboard applications and for normal power steering. ORFS -6 Female to ORFS -6 Female. Must order 2 per cylinder.

  • POWER STEERING HOSE - BULKHEAD TO CYLINDER TANK

    Guide p.473
    • 32 8M0077081.5 inch hose, bulkhead to cylinder tank for joystick applications.

  • JPO BULKHEAD PLATE

    Guide p.473
    • 8M0146247Improved bulkhead plate with threaded passage for multiple hose installations. Joystick, multiple Hose Installations.

FITTINGS

  • BULKHEAD FITTING - RETURN LINE - SHORT

    Guide p.473
    • 22 8M6001488.75 thickness, return line. Required for all JPO systems.

  • BULKHEAD FITTING - RETURN LINE - LONG

    Guide p.473
    • 22 8M60022643 inch thickness, return line. Required for all JPO systems.

  • BULKHEAD FITTING - PRESSURE LINE - SHORT

    Guide p.473
    • 22 8M6001495.75 inch thickness, pressure line. Required for all JPO systems.

  • BULKHEAD FITTING - PRESSURE LINE - LONG

    Guide p.473
    • 22 8M60014973 inch thickness, pressure line. Required for all JPO systems.

  • BULKHEAD FITTING - 90 DEGREE RETURN LINE

    Guide p.473
    • 22 8M0031467.5 inch female to .5 inch male. Used on top of bulkhead fittings.

  • BULKHEAD FITTING - 90 DEGREE PRESSURE LINE

    Guide p.473
    • 22 8M0031539.375 inch female to .375 inch male. Used on top of bulkhead fittings.

  • STEERING CYLINDER FITTING - STRAIGHT RETURN LINE

    Guide p.474
    • 22 8M2007090.375 inch male to .5 inch male. This straight fitting can be used to replace the standard 90 degree cylinder fitting for some installs where needed.

  • ADAPTER FITTING

    Guide p.474
    • 22 8M0161199Adapter fitting

  • STEERING CYLINDER FITTING - .8125 INCH

    Guide p.474
    • 22 8M0131184.8125 inch (13/16). This fitting can be used for some JPO installs where needed to further stabilize engines.

For part numbers without a listed price, contact us for pricing and lead time.

Source: 2025 Quicksilver Precision Parts & Accessories Guide (EMEA), Controls & Rigging section.

Accessory Guide — Controls, Gauges & Rigging