Accessory Guide

MPC 4000 PANEL MOUNT REMOTE CONTROLS (GEN II)

The Panel Mount Controls are applicable for outboard and MCM/MIE engines. The handle is designed to provide optimal ergonomic use while the best-in-class mechanics offer smooth operation, improved responsiveness and increased strength. All panel mount controls have an integral lanyard stop switch which is sealed for water resistance. The power trim models incorporate a single rocker type trim switch in handle for ease of operation.

• MPC PANEL-GEN II- FINGER RELEASE-O/B

  Guide p.441
  • 8M0011213The Panel Mount control features a black handle and comes with a 4ft. (1.22 m) trim harness with the 3 pin molex connector. All installations require a separate Ignition/Choke assembly and T/S cables to complete the installation. The neutral safety switch leads are 6.5 ft.(1.98 m)and have a bullet connector on the ends. The lanyard switch leads also have bullet style connector ends. The control fits all current Mercury/Mariner outboards (with integral trim) and 1993 and newer Force outboards 40

• MPC PANEL-GEN II- FINGER RELEASE-MCM/MIE

  Guide p.441
  • 8M0011214The Panel Mount control features a black handle and comes with a 4ft. (1.22 m) trim and trailer switch harness with the 4 pin molex connector. All installations require a separate Ignition/Choke assembly and T/S cables to complete the installation. The neutral safety switch leads are 6.5 ft. (1.98 m) and have a bullet connector on the ends. The lanyard switch leads also have bullet style connector ends. Must use Gen II Throttle/Shift cables. (897978A__) The power trim extension harness also need

• MPC PANEL-GEN II- FINGER RELEASE-O/B NO TRIM

  Guide p.441
  • 8M0011212The Panel Mount control features a black handle and is designed for outboard engines w/o power trim. All installations require a separate Ignition/Choke assembly and T/S cables to complete the installation. The power trim adapter harness is included to convert 3 pin molex connector to the traditional 3 blade Mercury connector. The neutral safety switch leads are 6.5 ft. (1.98 m) long and have bullet connectors on the ends. The lanyard switch leads also have bullet connectors on the ends. Used on

• MPC PANEL-GEN II- FINGER RELEASE-MCM/MIE NO TRIM

  Guide p.441
  • 8M0011215The Panel Mount control features a black handle and is designed for MCM/MIE engines w/o power trim. All installations require a separate Ignition/Choke assembly and T/S cables to complete the installation. The power trim adapter harness is included to convert 3 pin molex connector to the traditional 3 blade Mercury connector. The neutral safety switch leads are 6.5 ft. (1.98 m) long and have bullet connectors on the ends. The lanyard switch leads also have bullet connectors on the ends. This con

• MPC PANEL-GEN II- FINGER RELEASE-O/B (CHROME)

  Guide p.441
  • 8M0030550The Panel Mount control features a chrome handle and comes with a 4ft. (1.22 m) trim harness with the 3 pin molex connector. All installations require a separate Ignition/Choke assembly and T/S cables to complete the installation. The neutral safety switch leads are 6.5 ft. (1.98 m) and have a bullet connector on the ends. The lanyard switch leads also have bullet style connector ends. The control fits all current Mercury/Mariner outboards (with integral trim) and 1993 and newer Force outboards

• MPC PANEL-GEN II- FINGER RELEASE-MCM (CHROME)

  Guide p.442
  • 8M0030551The Panel Mount control features a chrome handle and comes with a 4ft. (1.22 m) trim and trailer switch harness with the 4 pin molex connector. All installations require a separate Ignition/Choke assembly and T/S cables to complete the installation. The neutral safety switch leads are 6.5 ft. (1.98 m) and have a bullet connector on the ends. The lanyard switch leads also have bullet style connector ends. Must use Gen II Throttle/Shift cables. (897978A__) The power trim extension harness also nee

• PANEL MOUNT REMOTE CONTROL-GEN II- LOCK BAR

  Guide p.442
  • 883710A02The Panel Mount control features a chrome handle and comes with a 4ft. (1.22 m) trim harness with the 3 pin molex connector. All installations require a separate Ignition/Choke assembly and T/S cables to complete the installation. The neutral safety switch leads are 6.5 ft. (1.98 m) and have a bullet connector on the ends. The lanyard switch leads also have bullet style connector ends. The control fits all current Mercury/Mariner outboards (with integral trim) and 1993 and newer Force outboards

• BATTERY CABLE KIT

  Guide p.442
  • 84 8M0210761Pair of 12 foot (3.7m) cables, 1 red(+) Positive and 1 black(-) Negative, 4 gauge with ring terminals. 105c 4AWG SGT, 5/16 engine direct to battery, 3/8 and 5/16 boat. This is an optional accessory kit and may not reflect the original cables on your engine. For original manufactured service part replacement, the Electronic Parts Catalog should always be used for each specific engine. For alternate length cables, consult the appropriate service manual. Fits Mercury/Mariner outboard engines

• NON TRIM PANEL MOUNT REMOTE CONTROL-GEN II- LOCK BAR

  Guide p.442
  • 883710A01The Panel Mount control features a chrome handle and is designed for outboard engines w/o power trim. All installations require a separate Ignition/Choke assembly and T/S cables to complete the installation. The power trim adapter harness is included to convert 3 pin molex connector to the traditional 3 blade Mercury connector. The neutral safety switch leads are 6.5 ft. (1.98 m) long and have bullet connectors on the ends. The lanyard switch leads also have bullet connectors on the ends. Used o

MCC 4500 CONSOLE MOUNT - SINGLE ENGINE (GEN II)

The single station console controls are applicable for outboard and MCM/MIE engines. The handle is designed to provide optimal ergonomic use while the best-in-class mechanics offer smooth operation, improved responsiveness and increased strength. The throttle only button is located at the base of handle.

• CONSOLE MOUNT SINGLE OB - NO TRIM

  Guide p.442
  • 8M4507540Single Console Mount for Outboard. Chrome, no trim. New Mechanical Remote Control with neutral lock. Can be used for Mercury Inboard Engine applications as well. New lever supports ABYC P14.5.7 requirements which went into effect July 1st, 2022.

• CONSOLE MOUNT SINGLE OB TRIM

  Guide p.442
  • 8M4507538Single Console Mount for Outboard with Trim, Chrome. New Mechanical Remote Control with neutral lock. New lever supports ABYC P14.5.7 requirements which went into effect on July 1st, 2022.

• CONSOLE MOUNT SINGLE OB TRIM - BLACK

  Guide p.443
  • 8M4507541Single Console Mount for Outboard with trim, Black. New Mechanical Remote Control with neutral lock. New lever supports ABYC P14.5.7 requirements which went into effect July 1st, 2022.

• CONSOLE MOUNT SINGLE MCM TRIM

  Guide p.443
  • 8M4507539Single Console Mount for MerCruiser Marine with trim. New Mechanical Remote Control with neutral lock. New lever supports ABYC P14.5.7 requirements which went into effect July 1st, 2022.

• SPACER KIT FOR 4500 SINGLE CONTROLS

  Guide p.443
  • 98 8M0075237Allows the control to be raised approximately 2 inches for applications that require clearance with handle movement. Used only with newer single handle consoles.

• RETRO KIT FOR SINGLE CONSOLE CONTROLS

  Guide p.443
  • 8M0061334This kit allows you to convert the housing and bracket on the older single handle control. Single Handle Console Conversion Kit for older version models.

MCC 4500 CONSOLE MOUNT - DUAL ENGINE (GEN II)

The single station dual handled console controls are applicable for outboard and MCM/MIE engines. The handles are designed to provide optimal ergonomic use while the best-in-class mechanics offer smooth operation, improved responsiveness and increased strength. The throttle only button is located at the base of the handle.

• NON TRIM CONSOLE MOUNT REMOTE CONTROL-GEN II

  Guide p.443
  • 8M0075244This control is designed for dual MIE inboards & outboards w/o power trim. All installations require an Ignition/Choke assembly and T/S cables to complete the installation. Must purchase lanyard separately. This control fits MIE inboards and all current Mercury/Mariner outboards(without power trim), and 1993 and newer Force outboards 40 HP and higher utilizing Mercury style cables (without power trim). Must use Gen II T/S cables for the installation.

• CONSOLE REMOTE CONTROL W/ TRIM-GEN II-DUAL

  Guide p.443
  • 8M0075245This control features a single trim switch in the port handle for simultaneous dual engine trim and trailering. There are individual engine trim buttons in the cover. All installations require a Ignition/Choke assembly and T/S cables to complete the installation. Must purchase lanyard separately. This control fits all current Mercury/Mariner outboards (with integral trim) and 1993 and newer Force outboards 40 HP and higher utilizing Mercury style cables (with power trim). Must use GEN II T/S cab

• CONSOLE MOUNT REMOTE CONTROL-GEN II

  Guide p.443
  • 8M0075246This control features a single trim switch in the port handle for simultaneous dual engine trim and trailering. There are individual trim buttons in the cover. All installations require T/S cables to complete the installation. Must purchase lanyard separately. The control will need Power trim harness, 4 pin Molex connector to the Packard 3 pin connector 84-865772T01 or T02 This control will use GEN II T/S cables. Fits all MCM applications.

• SPACER KIT FOR 4500 DUAL CONTROLS

  Guide p.444
  • 8M0085790The spacer will raise the control approximately 2 in. for the applications that require clearance with handle movement. Used only with 8M0075244, 8M0075245, 8M0075246 dual handle console controls.

• RETRO KIT FOR DUAL CONSOLE CONTROLS

  Guide p.444
  • 8M0085733This kit will allow you to convert the housing and bracket of older style dual consoles to resemble current dual console mount controls. Dual Handle Conversion Kits for older version to look like 8M0075244, 8M0075245, 8M0075246 models.

MSC 4000 SIDE MOUNT - ELECTRIC, POWER TRIM

These controls provide a smooth shift/load feel and an improved aesthetics. The control utilizes a 14 pin connector wiring harness and lanyard stop switch. The power trim models incorporate a single rocker type trim/trailer switch in the handle.This control is not for use with engines that have counter rotating lower units. Older engines may require a harness adapter.

• SIDE MOUNT REMOTE CONTROL-14 PIN

  Guide p.444
  • 8M0176287This control features a handle mounted power trim switch and a 15 ft. (4.58 m) harness with 14 pin Deutsch connector. The control will connect to the engine models below without the use of an adapter harness. For 2006 and newer non DTS 25-300 HP Outboard engines. GEN II cables must be used. CANP 2pin connection for SmartCraft added. Must purchase additional 2pin resistor 893388A01.
  • 8M0176288This control features a handle mounted power trim switch and a 20 ft. (6.1 m) harness with 14 pin Deutsch connector. The control will connect to the engine models below without the use of an adapter harness. For 2006 and newer non DTS 25-300 HP Outboard engines. GEN II cables must be used. CANP 2pin connection for SmartCraft added. Must purchase additional 2pin resistor 893388A01.

• SIDE MOUNT REMOTE CONTROL- 8 PIN TRADITIONAL

  Guide p.444
  • 8M0176294This control features a handle mounted power trim switch, 15 ft. (4.58 m) harness, built-in warning horn and power trim leads for front mount switch. Fits all current Mercury/Mariner outboards (with integral power trim) and 1993 and newer Force outboards 40 HP and higher utilizing Mercury style cables (with power trim). When used with MY2005 and newer 8/9.9/15/20 FourStroke outboards an adapter harness is required. For MY2005 and newer 8/9.9 FourStroke outboards SAE T/S cables must be used. GEN
  • 8M0176295This control features a handle mounted power trim switch, 20 ft. (6.1 m) harness, built-in warning horn and includes power trim leads for front mount switch. Fits all current Mercury/Mariner outboards (with integral power trim) and 1993 and newer Force outboards 40 HP and higher utilizing Mercury style cables (with power trim). When used with MY2005 and newer 8/9.9, 15/20 FourStroke outboards an adapter harness is required. For MY2005 and newer 8/9.9 FourStroke outboards SAE T/S cables must be u

• SIDE MOUNT REMOTE CONTROL- 8 PIN TYCO/MOLEX CLEAR

  Guide p.444
  • 8M0176290This control features a handle mounted power trim switch, 15 ft. (4.58 m) harness with 8-pin tyco/molex clear connector. The control will connect to the engine models below without the use of an adapter. Used on MY2005 and newer, 8/9.9, 15/20 FourStroke engines with electric start and power trim. For 8/9.9 FourStroke engines generation change above S/N OR192772 and 15/20 FourStroke engines will use GEN I cables. GEN II cables must be used on other engines.

• SIDE MOUNT REMOTE CONTROL

  Guide p.444
  • 8M0176297This control features a handle mounted power trim switch, 15 ft. (4.58 m) harness with push to choke 14-pin connector. Push to choke key may require additional engine adapter. Fits all current Mercury/Mariner outboards 6 HP and above and 1993 and newer Force outboards 40 HP and above (with power trim). GEN II cables must be used.

• SIDE MOUNT REMOTE CONTROL - 10 PIN TYCO/ MOLEX CLEAR

  Guide p.444
  • 8M0176291This control features a handle mounted power trim switch, 20 ft. (6.1 m) harness with 10-pin tyco/molex clear connector. The control will connect to the engine models below without the use of an adapter harness. Used on MY2005 and newer, 8/9.9, 15/20 FourStroke engines with electric start and power trim. For 8/9.9 FourStroke engines generation change above S/N OR192772 and 15/20 FourStroke engines will use GEN I cables. GEN II cables must be used on other engines.

• SIDE MOUNT REMOTE CONTROL-14 PIN (PORT SIDE MOUNT)

  Guide p.444
  • 8M0178539Stackable 4000 SMC Remote Control with power trim. This side mount control is for mounting on the port side and controlling with the left hand. This control features a handle mounted power trim switch and 15ft. (4.58m) harness with 14 pin Deutsche connector. For 2006 and newer non DTS 25-300 HP Outboard engines. GEN I cables must be used. No adapter harness required.

• SIDE MOUNT REMOTE CONTROL-14 PIN

  Guide p.445
  • 8M0178536Has a handle mounted power trim switch and a 15 ft. (4.58 m) harness with 14 pin Deutsche connector and will direct connect to the engine models below without the use of an adapter harness. Ref. Throttle/shift cable Gen I - 897977A__. Throttle/ Shift cables (896143A) for MY2005 and newer 8/9.9 FourStroke outboards. 8-9.9 4 Stroke engines generation change above S/N OR192772 and new 15/20 4 Stroke engines will use Gen I series T/S Cables 2006 - 25- 300 HP 4 Stroke any engine that has the 14 pin c
  • 8M0178537Has a handle mounted power trim switch and a 20 ft. (6.1 m) harness with 14 pin Deutsche connector and will direct connect to the engine models below without the use of an adapter harness. Ref. Throttle/shift cable Gen I - 897977A__. Throttle/ Shift cables (896143A) for MY2005 and newer 8/9.9 FourStroke outboards. 8-9.9 4-Stroke engines generation change above S/N OR192772 and new 15/20 4 Stroke engines will use Gen I series T/S Cables. 2006 - 25- 300 HP 4 Stroke any engine that has the 14 pin c

• SIDE MOUNT REMOTE CONTROL- 8 PIN TRADITIONAL

  Guide p.445
  • 8M0178521This control features a handle mounted power trim switch, 15 ft. (4.58 m) harness, built-in warning horn and power trim leads for front mount switch. Fits all current Mercury/Mariner outboards (with integral power trim) and 1993 and newer Force outboards 40 HP and higher utilizing Mercury style cables (with power trim). When used with MY2005 and newer 8/9.9/15/20 FourStroke outboards an adapter harness is required. For MY2005 and newer 8/9.9 FourStroke outboards SAE T/S cables must be used. GEN
  • 8M0178524This control features a handle mounted power trim switch, 20 ft. (6.1 m) harness, built-in warning horn and includes power trim leads for front mount switch. Fits all current Mercury/Mariner outboards (with integral power trim) and 1993 and newer Force outboards 40 HP and higher utilizing Mercury style cables (with power trim). When used with MY2005 and newer 8/9.9, 15/20 FourStroke outboards an adapter harness is required. For MY2005 and newer 8/9.9 FourStroke outboards SAE T/S cables must be u

• SIDE MOUNT REMOTE CONTROL- 10 PIN AMP

  Guide p.445
  • 8M0178533This control features a handle mounted power trim switch, 15 ft. (4.58 m) harness with amp 10-pin connector. The control will connect to the engine models below without the use of an adapter. Used on MY2005 and newer, 8/9.9, 15/20 FourStroke engines with electric start and power trim. For 8/9.9 FourStroke engines generation change above S/N OR192772 and 15/20 FourStroke engines will use GEN I cables. GEN I cables must be used on other engines.

• SIDE MOUNT REMOTE CONTROL

  Guide p.445
  • 8M0178534This control features a handle mounted power trim switch, 20 ft. (6.1 m) harness with Amp 10-pin connector. The control will connect to the engine models below without the use of an adapter harness. Used on MY2005 and newer, 8/9.9, 15/20 FourStroke engines with electric start and power trim. For 8/9.9 FourStroke engines generation change above S/N OR192772 and 15/20 FourStroke engines will use GEN I cables. GEN I cables must be used on other engines.

• REMOTE CONTROL ADAPTER HARNESS

  Guide p.445
  • 84 892473A01Converts the traditional Mercury connector to an amp 8-pin connector. Converts side mount controls 881170A 3, 15, 16 and the 816626A_ series ignition keyswitch harness to connect to the MY2005 and newer 8/9.9 hp. FourStroke outboard. MY2005 and newer 8/9.9 hp. FourStroke outboard and the 15/20 hp. FourStroke (351cc) outboard when a 8 pin side mount control or keyswitch harness is used.

• HARNESS EXTENSION- 10 PIN

  Guide p.445
  • 84 8M0058668This harness extension will allow you to increase the length by 6 feet of the 10 pin drop for instruments. The extension will work with Side Mount controls as well as any 896537 series main engine/boat harness.

MSC 4000 SIDE MOUNT - ELECT, NON-POWER TRIM

The remainder of controls 8M0178526, 8M0178528, 8M0178535 can be mounted starboard or port side and are stackable. They offer "push to choke" ignition switch, 8 pin connector wiring harness, lanyard stop switch, separate neutral warm-up lever and requires Gen I throttle and shift cables. All controls have a 5 pin accessory plug for tachometer and an adjustable throttle friction. These controls are not for use with engines that have counter rotating lower units. Older engines may require an adapter harness.

• SIDE MOUNT REMOTE CONTROL- 14 PIN

  Guide p.446
  • 8M0176289This control features non - power trim and a 15ft. (4.58m) harness with 14 pin Deutsch connector. Fits all current Mercury/Mariner Outboards 6 HP and above (without power trim), and 1993 and newer Force Outboards 40 HP and higher utilizing Mercury cables (without power trim). When used with a MY2005 and newer 8/9.9, 15/20 FourStroke Outboard an adapter harness is required. 2 pin connector is now included to allow for use of SmartCraft accessories with analog gauges. Gen II cable must be used.

• SIDE MOUNT REMOTE CONTROL

  Guide p.446
  • 8M0103451This control features a non - trim handle and a 15 ft. (4.58 M) harness with amp connector and will direct connect to the engine models below without the use of an adapter harness. For MY2005 and newer, 8/9.9, 15/20 HP FourStroke Outboards with electric start and non-trim. For MY2005 and newer 8/9.9 FourStroke Outboards SAE T/S cables must be used. For 8/9.9 FourStroke engines generation change above S/N OR192772 and 15/20 FourStroke engines will use GEN I cables. GEN II cables must be used on o
  • 8M0103454This control features a non-power trim handle, 15 ft.(4.58 m) harness and built-in warning horn. Fits all current Mercury/Mariner Outboards 6 HP and above (without power trim) and 1993 and newer Force Outboards 40 HP and higher utilizing Mercury style cables (with power trim). For MY2005 and newer 8/9.9 FourStroke Outboards SAE T/S cables must be used. For 8/9.9 FourStroke engines generation change above S/N OR192772 and 15/20 FourStroke engines will use GEN I cables. When used with a MY2005 and

• SIDE MOUNT REMOTE CONTROL

  Guide p.446
  • 8M0178526This control features a non-power trim handle, 15 ft. (4.58 m) harness and built-in warning horn. Fits all current Mercury/Mariner Outboards 6 HP and above (without power trim) and 1993 and newer Force Outboards 40 HP and higher utilizing Mercury style cables (with power trim). For MY2005 and newer 8/9.9 FourStroke Outboards SAE T/S cables must be used. For 8/9.9 FourStroke engines generation change above S/N OR192772 and 15/20 FourStroke engines will use GEN I cables. When used with a MY2005 an
  • 8M0178528This control features a non - powered trim handle with a 15 ft. (4.58 m) harness. This control does not have a warning horn and features push throttle cable operation. Fits Mercury/Mariner Outboards 20/25 HP (U.S. S/N 0G044026 and below; Belgium S/N 9807908 and below). GEN I cables must be used.

• SIDE MOUNT REMOTE CONTROL

  Guide p.446
  • 8M0178535This control features a non - trim handle and a 15 ft. (4.58 M) harness with amp connector and will direct connect to the engine models below without the use of an adapter harness. For MY2005 and newer, 8/9.9, 15/20 HP FourStroke Outboards with electric start and non-trim. For MY2005 and newer 8/9.9 FourStroke Outboards SAE T/S cables must be used. For 8/9.9 FourStroke engines generation change above S/N OR192772 and 15/20 FourStroke engines will use GEN I cables. GEN I cables must be used on ot

MSC 4000 SIDE MOUNT - MANUAL START, W/ SWITCH

These controls are for Outboard engines and can be mounted on the Port or Starboard side. These controls feature an ignition stop switch and lanyard stop switch only.

• SIDE MOUNT REMOTE CONTROL

  Guide p.447
  • 8M0178527This control is for manual start models and has a 20 ft. (6.1 m) harness. The control features a Toggle switch for remote shut off of the engine. Fits current pull style throttle, manual start Mercury/Mariner 6/25 HP, 30/40 HP (2 cylinder- U.S. origin), 40 (3 & 4 cylinder) to 45 HP, 8/9.9, 15/20 HP FourStroke models (1996 and newer), and Force 25 HP (3 cylinder). For MY2005 and newer 8/9.9 FourStroke Outboards SAE T/S cables must be used. For 8/9.9 FourStroke engines generation change above S/N

MSC 4000 SIDE MOUNT - MANUAL START W/ NO SWITCH

These controls are for Outboard engines and can be mounted on the Port or Starboard side. The controls do not include switches or harness.

• SIDE MOUNT REMOTE CONTROL

  Guide p.447
  • 8M0178530This control is for manual start models. Fits Mercury/Mariner 4/5 HP and Mariner 8/55 HP (2 cylinder). GEN I cables must be used.

MSC 4000 SIDE MOUNT - ACCESSORIES

• DUAL ENGINE MOUNT KIT

  Guide p.447
  • 16909A2This kit contains all necessary hardware for mounting or stacking two controls together for dual engine installations.

• REMOTE CONTROL SPACER PLATE

  Guide p.447
  • 17063TIncluded with Commander 2000/MSC 4000 side mount control. Generally, one spacer is adequate for most installations: however, two or more can be stacked to provide additional side clearance. Measures 1/2 in.(13 mm) thick.

• REMOTE CONTROL SPACER PLATE

  Guide p.447
  • 8M0114782Spacer is included with the side mount control and is adequate for most installations. However, additional spacers may be stacked to provide additional side clearance. This spacer kit is used with the updated silver control box side mount controls only.

COMMANDER SERIES CONSOLE MOUNT - SINGLE ENGINE

The control has an adjustable throttle friction and neutral detent. Power trim models incorporate a single toggle type trim switch in handle and trim harness.

• CONSOLE MOUNT REMOTE CONTROL

  Guide p.447
  • 88688A25Comes with 4 ft.(1.22 m) trim harness. All installations require a separate Ignition/ Choke assembly and Throttle/Shift Cables to complete the installation. Ref throttle/ shift cables 897977A__ (adapter for 3 pin P/T - 84-898286T01). Fits all current Mercury / Mariner outboards (with integral power trim), and 1993 and newer Force outboards 40 hp and higher utilizing Mercury style cables (with power trim).

• CONSOLE MOUNT REMOTE CONTROL

  Guide p.448
  • 88688A26Comes with 20 ft.(6.1 m) trim harness and trailer switch. All installations require a separate Ignition Switch and Throttle/Shift Cables to complete the installation. Ref throttle/shift cables 897977A__ Fits all MCM/MIE and Mercury/Mariner 3.4L outboards with external trim cylinders.

• CONSOLE MOUNT REMOTE CONTROL

  Guide p.448
  • 88688A27For non-power trim models. All installations require a separate Ignition/Choke assembly and Throttle/Shift Cables to complete the installation. Ref throttle/shift cables 897977A__ Fits all current Mercury / Mariner outboards (without power trim), and 1993 and newer Force outboards 40 hp and higher utilizing Mercury style cables (without power trim).

COMMANDER SERIES CONSOLE MOUNT - DUAL ENGINE

The control has an adjustable throttle friction and neutral detent.

• CONSOLE MOUNT REMOTE CONTROL

  Guide p.448
  • 88688A22Comes with 4 ft.(1.22 m) trim harness. All installations require a separate Ignition/ Choke assembly and Throttle/Shift Cables to complete the installation. Ref throttle/ shift cables 897977A__ Fits all current Mercury / Mariner outboards (with integral power trim), and 1993 and newer Force outboards 40 hp and higher utilizing Mercury style cables (with power trim).

• CONSOLE MOUNT REMOTE CONTROL

  Guide p.448
  • 88688A23Comes with 20 ft.(6.1 m) trim harness and trailer switch. All installations require a separate Ignition Switch and Throttle/Shift Cables to complete the installation. Ref throttle/shift cables 897977A__ Fits all MCM/MIE and Mercury/Mariner 3.4L outboards with external trim cylinders.

• CONSOLE MOUNT REMOTE CONTROL

  Guide p.448
  • 88688A24For non-power trim models. All installations require a separate Ignition/Choke assembly and Throttle/Shift Cables to complete the installation. Ref throttle/shift cables 897977A__ Fits all current Mercury / Mariner outboards (without power trim), and 1993 and newer Force outboards 40 hp and higher utilizing Mercury style cables (without power trim).

ZERO EFFORT REMOTE CONTROLS

Starboard mounted FWD CANT controls can be rotated 180 degrees and installed in port mounted AFT CANT configuration. Likewise, starboard mounted AFT CANT controls can be rotated 180 degrees and installed in port mounted FWD CANT configuration. All controls with shift levers include a neutral safety switch for start in gear protection. Controls with trim switch are for starboard installation only. All levers are listed in left to right configurations. Order F5H208/__ or 64-820676A__ series cables separately.

• ZERO EFFORT DIGITAL CONTROL

  Guide p.448
  • 8M0030501Top mounted 2 lever digital throttle and shift (DTS) remote control. 1 shift lever (black knob) and 1 throttle lever (red knob). For use with Race outboards and stern drive engines equipped with DTS.

• ZERO EFFORT DIGITAL CONTROL

  Guide p.449
  • 8M0095632Top mount 2 lever digital throttle and shift (DTS) remote control. Shift and throttle configuration. Shift lever has black knob and throttle lever has red knob. Port mount. For use with Race outboards and stern drive engines equipped with DTS.

• ZERO EFFORT DIGITAL CONTROL

  Guide p.449
  • 8M0085611Top mounted 2 lever digital throttle and shift (DTS) remote control. Lever knobs are clear anodized. For use with Race outboards and stern drive engines equipped with DTS.

• ZERO EFFORT DIGITAL CONTROL

  Guide p.449
  • 8M0085619Top mounted 4 lever digital throttle and shift (DTS) remote control. Shift/throttle/ throttle/shift configuration. All lever knobs are clear anodized. Starboard mount. For use with Race outboards and stern drive engines equipped with DTS.

• ZERO EFFORT DIGITAL CONTROL

  Guide p.449
  • 8M0085481Top mounted 2 lever digital shift/shift remote control. Both levers have black knobs. Port mount. For use with Race outboards and stern drive engines equipped with DTS (digital throttle and shift).

• ZERO EFFORT DIGITAL CONTROL

  Guide p.449
  • 8M0085615Top mounted 2 lever digital shift/shift remote control. Lever knobs are clear anodized. Port mount. For use with Race outboards and stern drive engines equipped with DTS (digital throttle and shift).

• ZERO EFFORT DIGITAL CONTROL

  Guide p.449
  • 8M0085613Top mounted 2 lever digital throttle/throttle remote control. Lever knobs are clear anodized. Starboard mount. For use with Race outboards and stern drive engines equipped with DTS (digital throttle and shift).

• ZERO EFFORT DIGITAL CONTROL

  Guide p.449
  • 8M0085477Top mounted 2 lever digital throttle/throttle remote control. Both levers have red knobs. Starboard mount. For use with Race outboards and stern drive engines equipped with DTS (digital throttle and shift).

• ZERO EFFORT DIGITAL CONTROL

  Guide p.449
  • 8M0092091Top mounted 4 lever digital throttle and shift (DTS) remote control. Shift/throttle/ throttle/shift configuration. All lever knobs are clear anodized. Port mount. For use with Race outboards and stern drive engines equipped with DTS.

• ZERO EFFORT DIGITAL CONTROL

  Guide p.450
  • 8M0085617Top mounted 4 lever digital throttle and shift (DTS) remote control. Shift/shift/ throttle/throttle configuration. All lever knobs are clear anodized. Starboard mount. For use with Race outboards and stern drive engines equipped with DTS.

• ZERO EFFORT DIGITAL CONTROL

  Guide p.450
  • 8M0085806Top mounted 4 lever digital throttle and shift (DTS) remote control. Throttle/throttle/ shift/shift configuration. All lever knobs are clear anodized. Starboard mount. For use with Race outboards and stern drive engines equipped with DTS.

• ZERO EFFORT DIGITAL CONTROL

  Guide p.450
  • 8M0092088Top mount 4 lever digital throttle and shift (DTS) remote control. Shift/throttle/ throttle/shift configuration. Shift levers have black knobs and throttle levers have red knobs. Port mount. For use with Race outboards and stern drive engines equipped with DTS.

• ZERO EFFORT DIGITAL CONTROL

  Guide p.450
  • 8M0085491Top mounted 4 lever digital throttle and shift (DTS) remote control. Shift/throttle/ throttle/shift configuration. Shift levers have black knobs and throttle levers have red knobs. Starboard mount.

• ZERO EFFORT DIGITAL CONTROL

  Guide p.450
  • 8M0085804Top mounted 4 lever digital throttle and shift (DTS) remote control. Throttle/throttle/ shift/shift configuration. Shift levers have black knobs and throttle levers have red knobs. Starboard mount. For use with Race outboards and stern drive engines equipped with DTS.

• ZERO EFFORT CONTROL

  Guide p.450
  • 844466A703 throttle levers / White/ FWD CANT (w/ trim) Fits Mercury/Mariner and MCM/MIE.

• ZERO EFFORT CONTROL

  Guide p.450
  • 844634A746 levers - 2 shift & 3 throttle & 1 shift/ White/ FWD CANT (w/ trim) Fits Mercury/Mariner and MCM/MIE.

• DIODE KIT - DUAL DOWN

  Guide p.450
  • 812497T03Prevents feedback in the down trim circuits between multiple engines. Also need to order Diode Kit 812497A 4. Required and only used on boats with "dual" engines when updating zero effort control levers without trim switches to levers with trim switches.

• DIODE KIT - DUAL UP

  Guide p.451
  • 812497A4Prevents feedback in the up trim circuits between multiple engines. Also need to order Diode Kit 812497A 3. Blue Trim UP, Dual Diode, 1 Bullet In - 4 Bullet Out Required and only used on boats with "dual" engines when updating zero effort control levers without trim switches to levers with trim switches.

• DIODE KIT - QUAD DOWN

  Guide p.451
  • 812497A5Prevents feedback in the down trim circuits between multiple engines. Also need to order Diode Kit 812497A 6. Green Trim Down , Quad Diode, 1 Bullet In - 6 Bullet Out Required and only used on boats with "triple" engines when updating zero effort control levers without trim switches to levers with trim switches.

• DIODE KIT - QUAD UP

  Guide p.451
  • 812497A6Prevents feedback in the up trim circuits between multiple engines. Also need to order Diode Kit 812497A 5. Blue Trim Up , Quad Diode, 1 Bullet In - 6 Bullet Out Required and only used on boats with "triple" engines when updating zero effort control levers without trim switches to levers with trim switches.

REMOTE CONTROL CONVERSION KITS

• REMOTE CONTROL CONVERSION KIT

  Guide p.451
  • 895284A01Converts an electric start tiller handle outboard to an electric start remote throttle and shift operation. Suitable controls, throttle/shift cables and keyswitch harnessing are additionally required. The appropriate carburetor and the steering link rod attaching hardware are included in the kit. Fits 9.9 hp. FourStroke, Model Year 2005-2006, both standard and BigFoot models requiring SAE ended throttle/shift cables. Serial Numbers JPN-0R042475-0R192771 & BEL-0P325500-0P513329.

• REMOTE CONTROL CONVERSION KIT

  Guide p.451
  • 895284A02Converts a manual start tiller handle outboard to a manual start remote throttle and shift operation. Suitable controls, throttle/shift cables and stopswitch harnessing are additionally required. The steering link rod attaching hardware is included in the kit. Fits 8/9.9 hp. FourStroke, Model Year 2005-2006, standard models requiring SAE ended throttle/shift cables. Serial Numbers JPN-0R042475-0R192771 & BEL-0P325500-0P513329.

• REMOTE CONTROL CONVERSION KIT

  Guide p.451
  • 889246A80Converts an 8/9.9 hp. FourStroke MH (manual start tiller model) to a MRC (manual start remote control model). Fits the 8/9.9 hp. FourStroke MH outboard, 209 cc., all calibrations requiring Mercury style ended throttle/shift cables.

• REMOTE CONTROL CONVERSION KIT

  Guide p.452
  • 889246A81Converts a 9.9 hp. FourStroke EH (electric start tiller model) to a ERC (electric start remote control model). Remote controls and throttle/shift cables are required separate. Fits the 9.9 hp. FourStroke EH outboard, 209 cc., EPA calibrations requiring Mercury style ended throttle/shift cables, JPN-0R192772 & newer.

• REMOTE CONTROL CONVERSION KIT

  Guide p.452
  • 889246A33Remote control and throttle/shift cables are required separate. This kit converts an EH (electric start tiller) to an ERC (electric start remote control). Fits the 25-30 Hp EFI FourStroke Outboard, serial number 0R106999 & above.

• REMOTE CONTROL CONVERSION KIT

  Guide p.452
  • 889246A34Remote control and throttle/shift cables are required separate. This kit converts an MH (manual start tiller) to an MRC (manual start remote control). Fits the 25-30 Hp EFI FourStroke Outboard, serial number 0R106999 & above.

• REMOTE CONTROL CONVERSION KIT

  Guide p.452
  • 880095A08Converts an electric start tiller model to an electric start remote model. Suitable remote controls are required separate. Fits Mercury 40 hp (3 cylinder) FourStroke EFI outboards (CHN-1C049739 & above) and 40/50/60 hp (4 cylinder) FourStroke EFI outboards (CHN-1C050252 & above).

• REMOTE CONTROL CONVERSION KIT

  Guide p.452
  • 880095A11Converts a 15 Hp. FourStroke outboard from an EH (electric tiller) model to an ERC (electric remote control) model. Remote controls, cables, etc. are not included in this kit. Power trim models require additional trim harness kit 84-856554A02. Fits the 15 Hp. FourStroke EH outboard, 351cc., 0R235949 and above.

• REMOTE CONTROL CONVERSION KIT

  Guide p.452
  • 880095A12Converts a 20 Hp. FourStroke outboard from an EH (electric tiller) model to an ERC (electric remote control) model. Remote controls, cables, etc. are not included in this kit. Power trim models require additional trim harness kit 84-856554A02. Fits the 20 Hp. FourStroke EH outboard, 351cc., 0R235168 and above.

• POWER TRIM HARNESS KIT

  Guide p.452
  • 84 856554A02Required to complete the conversion of the 15/20 Hp. FourStroke (351cc) outboard from a tiller handle power trim model to a remote controlled power trim model. Fits the 15/20 Hp. FourStroke, 351cc., EHPT model outboard beginning with serial number 0R235168 and above.

• REMOTE CONTROL CONVERSION KIT

  Guide p.452
  • 8M0172938Also requires the addition of an Electrical Harness 17162. This kit will not fit engines equipped with integral fuel tank assemblies. Fits Mercury/Mariner 4/5/6 hp. FourStroke outboards with remote fuel tanks, serial number 0R000001-0R411837.

• REMOTE CONTROL CONVERSION KIT

  Guide p.453
  • 8M0062241Fits Mercury/Mariner 4/5/6 hp. FourStroke outboards, serial number 0R411838 and above.

REMOTE CONTROL ATTACHING KITS

• REMOTE CONTROL ATTACHING KIT

  Guide p.453
  • 826557A1Fits Mercury/Mariner 30/40 (2-Stroke - 2 cyl. - U.S. origin)( 1994 and newer)

• REMOTE CONTROL ATTACHING KIT

  Guide p.453
  • 880093A1Fits 2001 and newer Mercury 40 hp 4-Stroke Bigfoot and 50/60 hp 4-Stroke Carb outboards (s/n 0T178500 and up).

• REMOTE CONTROL ATTACHING KIT

  Guide p.453
  • 880093A2Fits 2002-2006 Mercury 40 hp 4-Stroke Bigfoot and 50/60 hp 4-Stroke EFI outboards (USA-0T409000-1B344306, BEL-0P401000-0P515896, CHN-1C000001-1C050251).

OUTBOARD RIGGING HOSE KIT

Used to enclose remote harness, hoses, cables, etc. between engine cowl and boat transom.

• RIGGING TUBE KIT

  Guide p.453
  • 8M0149598Rigging Tube kit includes 5 ft. length (2 inch diameter x 2.3 threads per inch) tube that screws into the fitting coming out of the 3.4L V6 and 4.6L V8. Included in the kit is the plastic transom fitting that screws to the other end of the tube and can be fastened to the boat. Also included are the 3 different grommets that may be needed for different installations with the 3.4L or 4.6L engine platforms (CMS mech, CMS DTS, and AMS Verado). 3.4L and 4.6L outboard engines
  • 32 825191A03Rigging Tube kit includes 5 ft. length (2 inch diameter x 2.3 threads per inch) tube that screws into the fitting coming out of the Verado. If OptiMax engine, requires the use of the clamp to attach to fitting coming out of engine. Included in the kit is plastic transom fitting that screws to the tube and can be fastened to the boat. 2005 and newer Verado engines as well as all Opti Max engines
  • 32 8M0088822Rigging Tube kit includes 5 ft. length (2 inch diameter x 2.3 threads per inch) tube that screws into the fitting coming out of the engine. Includes new grommet 8M0075942 that is used when installing rigging tubes. Remove existing grommet from cowl and replace with this grommet. New 75-115 4 stroke
  • 32 8M0062693Rigging Tube kit includes 5 ft. length (2 inch diameter x 2.3 threads per inch) tube that screws into the fitting coming out of the engine. Includes new grommet 8M0061160 that is used when installing rigging tubes. Remove existing grommet from cowl and replace with this grommet. Used on 150 EFI 4-Stroke engine only

• GROMMET - INGRESS

  Guide p.453
  • 8M0062583Special Grommet used with Rigging Kits 150 HP 4 Stroke only

• HOSE-60 INCHES

  Guide p.454
  • 32 8M0204713Rigging hose, 60 inches.

• RIGGING HOSE

  Guide p.454
  • 32 85905550Replacement Hose, furnished in a 50 ft. bulk length that can be cut to required length. Fits various Mercury / Mariner V-6 outboards. See application chart for specific engine models. Priced individually, sold @ multiples of 2

• COWL FITTING

  Guide p.454
  • 875266A2Used on engine end of rigging hose. Fits various Mercury / Mariner V-6 outboards. Furnished standard with the engines beginning with model year 2,000. See application chart for specific engine models.

RIGGING HOSE CHART

• COWL FITTING

  Guide p.454
  • 8M8027677Used on engine end of rigging hose. Fits various Mercury / Mariner V-6 outboards. Furnished standard with the engines beginning with model year 2,000. Serial # Range Rigging Hose Kit Part Cowl Fitting Required Number 0G303046 - 0G949999 32-825191A03 875266A 2 0T065504 and up 32-825191A03 Incl. With Engine 0G303046 - 0G949999 32-825191A03 875266A 2 0T065504 and up 32-825191A03 Incl. With Engine 0G590000 - 0G949999 32-825191A03 875266A 2 0T065504 and up 32-825191A03 Incl. With Engine 0D280813 - 0G

MORSE 33C SERIES CABLE ADAPTERS

• ADAPTER KIT -MERCURY (T/S)

  Guide p.455
  • 64 892790A01Adapts 33C style cables for use with Mercury engines- Includes 2 sets of parts for two cables

• ADAPTER KIT -JOHNSON/EVINRUDE (T/S)

  Guide p.455
  • 64 892790A02Adapts 33C style cables for use with Johnson/Evinrude engines. Includes 2 sets of parts for two cables

• CABLE ADAPTER KIT

  Guide p.455
  • 898289A21Converts an older SAE cable engine to accept Mercury style throttle/shift cables. Fits the 8/9.9 hp. FourStroke (209cc) outboard, serial number 0R192771 and prior.

TWO STATION THROTTLE & SHIFT CABLES ATTACHING KIT

For use with Dual station Two Lever Controls.

• TWO STATION THROTTLE/SHIFT KIT

  Guide p.455
  • 8M0046250For use in dual MerCruiser control stations. Includes hardware for attaching throttle and shift cables from both stations to the engine. Twin engines require two kits. Fits MCM/MIE 8.2L models

BULKHEAD FITTINGS AND BELLOWS KITS

• SHIFT CABLE BELLOWS

  Guide p.455
  • 877581A5For 40 series cable, installs on cable outside of transom. Fits Sport-Jet 120XR2 and 175 (2000 and newer) with 40 series shift cables. Also fits 200 OptiMax, 210 & 240 EFI Jet Drives.

• BULKHEAD BELLOWS KIT

  Guide p.456
  • 850697A2Fits Jet Drive models with 40 series cables